Examkin

Soru

Zorluk: OrtaEmergency Equipment Requirements

A driver is conducting a pre-trip inspection on a truck dispatched to haul a placarded shipment of flammable liquid cargo. Which combination of emergency safety equipment satisfies all federal safety requirements for this transport?

  1. A
    One securely mounted, fully charged 5 B:C fire extinguisher, three bidirectional reflective triangles, and spare electrical fuses for each required circuit type.
  2. B
    One securely mounted, fully charged 10 B:C fire extinguisher, six red burning liquid flares, and spare electrical fuses for each required circuit type.
  3. One securely mounted, fully charged 10 B:C fire extinguisher, three bidirectional reflective triangles, and spare electrical fuses for each required circuit type.Cevap
  4. D
    Two securely mounted, fully charged 4 B:C fire extinguishers, two bidirectional reflective triangles, and an assortment of spare automotive fuses.

Cevap

One securely mounted, fully charged 10 B:C fire extinguisher, three bidirectional reflective triangles, and spare electrical fuses for each required circuit type.
Federal Motor Carrier Safety Regulations (FMCSR) dictate that power units transporting placarded hazardous materials must carry a fully charged fire extinguisher rated at least 10 B:C, at least three bidirectional red reflective triangles (non-flame warning devices), and spare electrical fuses for each circuit type unless equipped with circuit breakers.

Adım Adım Çözüm

1
Determine the required fire extinguisher rating based on cargo type.
Placarded hazardous materials (such as flammable liquids) require a minimum Underwriters' Laboratories (UL) rating of 10 B:C.
Federal regulations mandate a higher fire extinguishing capacity (10 B:C versus 5 B:C for general freight) when transporting hazardous materials.
2
Identify permissible emergency warning devices for hazardous cargo.
Three bidirectional red reflective triangles are required; open flame devices (flares, fusees) are prohibited.
Flame-producing warning devices pose an ignition risk when operating near flammable liquids or gases.
3
Verify spare electrical fuse requirements.
Spare fuses must be present for each type and size needed to operate any required electrical parts, unless the vehicle uses circuit breakers.
Ensures critical safety lighting and electrical components can be restored en route if a fuse blows.

Anahtar Kavram

Federal Emergency Equipment Requirements for Commercial Motor Vehicles
Tahmini Süre:1m 15s
Bu soruyu puanla

Konular

Emergency Equipment Requirements

Bu konudan daha fazla soru