Examkin

Soru

Zorluk: OrtaBrake System Components Inspection

During a pre-trip walkaround inspection of an air-braked commercial vehicle parked on level ground with the wheels chocked and parking brakes released, a driver inspects the foundation brake assemblies and mechanical linkages. Which of the following observations indicates a safety defect that requires mechanical adjustment or repair before operating the vehicle?

  1. A
    The pushrod does not move at all when pulled by hand while the parking spring brakes remain fully applied.
  2. The manual slack adjuster pushrod moves more than 1 inch from the brake chamber when pulled firmly by hand.Cevap
  3. C
    The friction lining thickness on the drum brake shoes measures 3/8 inch with no oil or grease contamination.
  4. D
    The angle between the pushrod and slack adjuster arm forms approximately 90 degrees when the service brakes are fully applied.

Cevap

The condition indicating a safety defect requiring repair is when the manual slack adjuster pushrod moves more than 1 inch from the brake chamber when pulled firmly by hand.
When checking manual slack adjusters on an S-cam foundation brake assembly, the vehicle must be parked on level ground with the wheels chocked and parking brakes released. Under manual pull with a tool or hand, pushrod free play should not exceed approximately 1 inch. Travel greater than 1 inch indicates the foundation brake is out of adjustment, which compromises stopping distance and requires immediate mechanical adjustment.

Adım Adım Çözüm

1
Identify the proper pre-trip inspection conditions for checking manual slack adjuster free play.
The vehicle must be parked on level ground, wheels chocked, and parking/spring brakes released so the pushrod is free to move.
If the spring brakes are applied, the pushrod cannot be pulled manually to measure free play.
2
Evaluate the allowable manual pushrod travel against commercial motor vehicle safety standards.
Free play travel must not exceed approximately 1 inch (25.4 mm) on manual slack adjusters when pulled firmly by hand.
Pushrod travel exceeding 1 inch indicates excessive clearance between brake shoes and the drum, reducing braking effectiveness and risking brake failure.
3
Compare all stated component observations against regulatory thresholds.
A pushrod stroke exceeding 1 inch is an out-of-adjustment defect, whereas 3/8 inch lining thickness (above the 1/4 inch minimum) and a 90-degree applied working angle are proper operating conditions.
Mastery of foundation brake safety criteria requires distinguishing valid mechanical defects from acceptable operating tolerances and testing errors.

Anahtar Kavram

Foundation Brake Inspection Tolerances and Pushrod Free Play Limits
Tahmini Süre:1m 0s
Bu soruyu puanla

Konular

Brake System Components Inspection

Bu konudan daha fazla soru