Examkin

Soru

Zorluk: ZorStopping Distance Components

A commercial motor vehicle equipped with an air brake system is traveling at highway speed when the driver spots a sudden stationary hazard in the roadway ahead. Before the brake linings make physical contact with the brake drums to begin actively decelerating the vehicle, which combination of stopping distance components has accumulated, and what characterizes the vehicle's motion during this entire pre-braking phase?

  1. A
    Perception distance and reaction distance only; the vehicle maintains initial cruising speed until the brake pedal is depressed, at which point friction deceleration begins instantaneously.
  2. B
    Reaction distance and brake lag distance only; perception time represents mental recognition and does not contribute to the physical distance the vehicle travels over the road.
  3. Perception distance, reaction distance, and brake lag distance; the vehicle continues to travel forward at its full initial cruising speed throughout all three components.Cevap
  4. D
    Perception distance, reaction distance, brake lag distance, and following distance reserve; the vehicle begins decelerating substantially as soon as the driver's foot releases the accelerator.

Cevap

Perception distance, reaction distance, and brake lag distance; the vehicle continues to travel forward at its full initial cruising speed throughout all three components.
Total stopping distance for an air-braked commercial vehicle consists of four distinct components: perception distance, reaction distance, brake lag distance, and effective braking distance. Before the brake linings mechanically contact the drums to generate friction, the vehicle must pass through perception (1.75 s1.75\text{ s}), reaction (0.75 s0.75\text{ s}), and brake lag (0.5 s0.5\text{ s}). Because no active retarding force is acting on the wheels during these three stages, the vehicle continues moving at its initial cruising velocity for the entire duration of all three pre-braking components.

Adım Adım Çözüm

1
Identify the driver-dependent latency phases before physical brake activation.
Perception distance (distance traveled while seeing and recognizing the hazard, typically averaging 1.75 seconds1.75\text{ seconds}) and reaction distance (distance traveled while moving the foot from the throttle to the brake pedal, typically averaging 0.75 seconds0.75\text{ seconds}).
During both cognitive and physical reaction delays, the vehicle remains under momentum without any braking input.
2
Identify the vehicle-mechanical latency phase unique to pneumatic brake systems.
Brake lag distance (the delay of approximately 0.5 seconds0.5\text{ seconds} for compressed air to travel through the brake lines and actuate the mechanical pushrods and S-cam mechanism).
Air brakes do not engage instantly upon pedal depression; air pressure must build in the chambers before mechanical friction begins.
3
Synthesize the pre-braking motion profile prior to active deceleration.
The total pre-braking distance consists of Perception Distance+Reaction Distance+Brake Lag Distance\text{Perception Distance} + \text{Reaction Distance} + \text{Brake Lag Distance}. Because foundation friction has not yet engaged, the vehicle covers this entire cumulative distance at its initial cruising speed.
Active deceleration only begins during the fourth component (effective braking distance), after all pre-braking latencies have elapsed.

Anahtar Kavram

Four Components of Air Brake Stopping Distance and Pre-Braking Velocity Invariance
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Stopping Distance Components

Bu konudan daha fazla soru