While crossing an elevated concrete bridge deck covered in patchy ice, a commercial motor vehicle experiences a drive-wheel skid that causes the rear of the tractor to slide outward to the right. Which action should the driver take immediately to regain directional control?
- ASteer sharply to the left and apply moderate service brakes to force the vehicle back into the center of the lane.
- Release the accelerator, push in the clutch, and turn the steering wheel to the right in the direction of the skid.Cevap
- CActivate the engine retarder to increase driveline resistance and slow the drive axle without locking the service brakes.
- DMaintain current throttle position and apply aggressive brake pedal pressure before reaching the end of the bridge span.
Cevap
Release the accelerator, push in the clutch, and turn the steering wheel to the right in the direction of the skid.
To recover from a drive-wheel skid, the driver must immediately remove power by letting off the accelerator and pushing in the clutch, then steer into the direction of the skid (turning right when the rear slides right) until rolling traction is restored, followed by counter-steering to avoid a secondary skid.
Adım Adım Çözüm
Anahtar Kavram
Drive-wheel skid recovery procedures and directional steering control on slippery surfaces.
Tahmini Süre:1m 15s