Examkin

Soru

Zorluk: ZorSpeed on Curves and Downgrades

You are operating a loaded tractor-trailer on a rural two-lane highway when you observe warning signs for a sharp right curve located on a 4% downgrade ahead. The pavement is damp from recent rainfall. Which driving practice ensures maximum vehicle stability and traction while negotiating this combined downgrade and curve?

  1. A
    Maintain standard cruising speed until reaching the curve's apex, then apply firm service brakes while steering through the arc to control both centrifugal force and downgrade acceleration.
  2. B
    Activate maximum engine retarder braking while negotiating the turn to control downgrade speed without generating foundation brake friction heat.
  3. Downshift to the proper low gear before reaching the grade, complete all required braking to a speed below the advisory limit in a straight line before entering the curve, and maintain light, steady throttle through the turn.Cevap
  4. D
    Place the transmission into neutral to eliminate driveline drag, relying on continuous light foot pressure on the brake pedal throughout the curve to match road speed.

Cevap

Downshift to the proper low gear before reaching the grade, complete all required braking to a speed below the advisory limit in a straight line before entering the curve, and maintain light, steady throttle through the turn.
Safe commercial vehicle operation dictates reducing speed to well below the advisory limit before curve entry and selecting a proper low gear before starting a descent. Performing all deceleration in a straight line ensures 100% of tire grip is dedicated to braking initially, leaving full lateral traction available for steering through the turn on damp pavement.

Adım Adım Çözüm

1
Select the appropriate low gear prior to starting down the downgrade and approaching the curve.
Engine compression braking assists in holding the vehicle at a manageable speed without overheating foundation brakes.
Attempting to downshift once descending a grade or while cornering can result in missing a gear and losing driveline braking control.
2
Apply service brakes smoothly in a straight line before turning the steering wheel into the curve.
Vehicle speed drops below the posted advisory speed limit before lateral forces act upon the combination.
Tires possess a finite traction circle. Splitting available traction between aggressive braking and lateral turning significantly increases skid and rollover hazards, especially on wet pavement.
3
Keep auxiliary retarders switched off or minimized on wet surfaces, guiding the vehicle through the turn with stable, light power.
All tires maintain rolling traction and lateral grip through the apex and exit of the curve.
Retarder torque on slippery surfaces can instantly break drive-wheel traction, while neutral coasting removes engine braking entirely.

Anahtar Kavram

Traction preservation via straight-line speed reduction and pre-descent gear selection on combination curves and grades
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Speed on Curves and Downgrades

Bu konudan daha fazla soru