Examkin

Soru

Zorluk: ZorSpeed on Curves and Downgrades

A commercial driver operating a loaded bulk tanker approaches an off-ramp curve marked with an advisory speed plaque of 30 mph30\text{ mph}. Considering vehicle stability, traction limits, and center-of-gravity dynamics, which speed management procedure should the driver execute to negotiate the curve safely?

  1. A
    Enter the curve at the posted 30 mph30\text{ mph} advisory speed and apply steady service brake pressure through the apex to counteract lateral acceleration.
  2. Reduce speed to at least 5 to 10 mph5\text{ to }10\text{ mph} below the posted advisory speed before entering the curve, then maintain slight power through the turn.Cevap
  3. C
    Maintain the posted 30 mph30\text{ mph} advisory speed throughout the curve, as highway advisory signs are engineered with built-in safety margins specifically calibrated for high-center-of-gravity commercial vehicles.
  4. D
    Enter the turn at prevailing highway speed and execute rapid snub-braking cycles between 30 mph30\text{ mph} and 25 mph25\text{ mph} while turning the steering wheel.

Cevap

Reduce speed to at least 5 to 10 mph5\text{ to }10\text{ mph} below the posted advisory speed before entering the curve, then maintain slight power through the turn.
Posted advisory speeds on curves and off-ramps are calculated for passenger vehicles with low centers of gravity. Heavy commercial vehicles—especially loaded tankers with high centers of gravity—must reduce speed to at least 5 to 10 mph5\text{ to }10\text{ mph} below the posted advisory speed before entering the curve. All braking must be completed on the straight roadway prior to entry so that 100%100\% of tire traction is available for steering and lateral grip, with light power maintained through the curve to stabilize the combination.

Adım Adım Çözüm

1
Analyze the vehicle configuration and roadway conditions
Identify that the vehicle is a loaded tanker with a high center of gravity subject to extreme lateral forces and rollover hazards on curves.
Commercial vehicle stability thresholds are significantly lower than those of passenger cars.
2
Evaluate the posted advisory speed in relation to commercial vehicle physics
Recognize that posted advisory limits are calibrated for passenger vehicles and may cause rollover in heavy combinations.
Safe curve negotiation requires slowing to 5 to 10 mph5\text{ to }10\text{ mph} below the advisory limit.
3
Determine the proper deceleration timing and traction allocation
Complete all necessary deceleration on the straight roadway before turning the wheel, then use gentle throttle through the curve.
Braking within the curve consumes tire traction needed for directional control and lateral stability.

Anahtar Kavram

Adjusting speed significantly below posted advisory limits prior to entering curves to account for commercial vehicle center of gravity and prevent traction loss.
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Speed on Curves and Downgrades

Bu konudan daha fazla soru