During a comprehensive under-hood pre-trip vehicle inspection, a commercial driver must evaluate various mechanical, electrical, and fluid systems against specific safety standards. Match each engine compartment component on the left with its correct pre-trip inspection criterion on the right.
- Alternator and electrical harnessCheck for secure mounting, absence of loose connections, and no cracked, frayed, or exposed wires
- Power steering fluid reservoirVerify fluid level is above the add line with the engine off, and ensure the filler cap is securely fastened
- Engine cooling system hosesInspect for active leaks, cuts, cracks, or bulges, and ensure all clamps are securely tightened
- Engine serpentine drive beltInspect for excessive play not exceeding 3/4 inch deflection at center span, and verify no severe cracks or splits
Cevap
Alternator and electrical harness matches with checking secure mounting and undamaged wiring; Power steering fluid reservoir matches with verifying fluid level above the add mark with the engine off; Engine cooling system hoses matches with inspecting for leaks, cuts, bulges, and tight clamps; Engine serpentine drive belt matches with checking deflection under 3/4 inch and absence of severe cracks.
Each under-the-hood assembly requires distinct inspection protocols according to CDL standards: electrical units (alternator and harness) require verifying secure mounting and intact, non-frayed wiring; hydraulic reservoirs require checking that the fluid level is above the add mark with the engine shut off; coolant hoses require checking for leaks, bulges, cuts, and tight clamps; and drive belts require verifying physical integrity and tension deflection not exceeding 3/4 inch.
Adım Adım Çözüm
Anahtar Kavram
Component-specific engine compartment pre-trip inspection standards and defect criteria
Tahmini Süre:1m 30s