Examkin

Soru

Zorluk: OrtaInspecting Cargo (Responsibilities and Schedule)

A logistics driver is operating a commercial tractor-trailer transporting general freight along an interstate corridor. The driver has completed the mandatory pre-trip cargo and vehicle inspection before departing the dispatch terminal. Under federal commercial vehicle safety regulations, which schedule correctly specifies when the driver must perform subsequent en-route cargo and securement inspections?

  1. A
    Within the first 100 miles of travel, and every 4 hours or 200 miles thereafter, whichever occurs first, or during scheduled meal breaks.
  2. Within the first 50 miles of travel, and every 3 hours or 150 miles thereafter, whichever occurs first, as well as whenever taking a driving break.Cevap
  3. C
    Only when the gross freight weight exceeds the working load limit rating, and at the end of each daily 11-hour driving window.
  4. D
    Exclusively at designated state weigh station scales and whenever additional tie-down straps are manually retensioned.

Cevap

Within the first 50 miles of travel, and every 3 hours or 150 miles thereafter, whichever occurs first, as well as whenever taking a driving break.
Federal Commercial Driver License standards require drivers to inspect the cargo and its securing devices within the first 50 miles of travel, and thereafter every 3 hours or 150 miles (whichever comes first), in addition to checking the load after every driving break or change of duty status.

Adım Adım Çözüm

1
Identify the initial en-route inspection requirement after departure.
Regulations mandate re-checking cargo and securement devices within the first 50 miles of beginning a trip.
Cargo often settles or shifts shortly after departure as the vehicle experiences initial road vibrations and turns.
2
Determine the recurring en-route inspection frequency during continuous transit.
Subsequent checks must occur every 3 hours or 150 miles, whichever milestone is reached first.
Periodic checks ensure that securement devices remain tight and freight has not loosened over prolonged travel.
3
Identify duty change and rest stop inspection obligations.
The driver must inspect cargo whenever taking a break or changing duty status.
Any stop provides an opportunity to verify load stability before re-entering highway traffic.

Anahtar Kavram

Standard commercial driver cargo inspection schedule and en-route safety obligations
Tahmini Süre:1m 15s
Bu soruyu puanla

Konular

Inspecting Cargo (Responsibilities and Schedule)

Bu konudan daha fazla soru