Commercial motor vehicle fires require specific suppression techniques and extinguishing agents depending on the involved material and vehicle component. Match each fire scenario with its correct immediate suppression procedure.
- Underinflated dual tire that has overheated and begun smolderingApply copious amounts of water or smother with dirt/sand; continue cooling until completely cold to prevent thermal re-ignition.
- Electrical wiring short behind the dashboard instrument clusterDisconnect power or shut off the battery master switch, then discharge a non-conductive B:C or A:B:C dry chemical agent.
- Diesel fuel puddle burning beneath the tractor fuel tankSweep a dry chemical extinguishing agent across the base of the flames; avoid applying water streams that spread the burning liquid.
- Cardboard boxes and wooden pallets burning inside a dry van trailerUse water or a multipurpose A:B:C dry chemical extinguisher to quench and penetrate deep-seated glowing embers.
Cevap
Underinflated dual tire fire matches applying copious water or dirt until cold; dashboard electrical fire matches cutting power and discharging non-conductive dry chemical; diesel fuel puddle fire matches sweeping dry chemical at base without using water; cardboard/wood cargo fire matches using water or multipurpose A:B:C extinguisher to quench embers.
Each commercial vehicle fire type is governed by fuel composition and hazard risks: tire fires require sustained cooling or smothering because internal rubber heat causes re-ignition; electrical fires require isolating power before applying non-conductive chemical agents; liquid fuel fires require dry chemical sweeping at the base while strictly prohibiting water; and Class A solid combustibles require penetrating cooling agents to extinguish deep embers.
Adım Adım Çözüm
Anahtar Kavram
Matching specific commercial vehicle fire classifications and hazard locations with their mandatory containment techniques and extinguishing agents
Tahmini Süre:1m 30s