Examkin

Soru

Zorluk: OrtaBrake System Components Inspection

While inspecting the foundation brake components on a commercial tractor-trailer, which observation or condition indicates that the brake assembly requires immediate maintenance before dispatch?

  1. A
    A pushrod shows no movement when pulled by hand while the vehicle's spring parking brakes remain fully applied.
  2. A pushrod on a manual slack adjuster travels 1121\frac{1}{2} inches when pulled firmly by hand with the parking brakes released and wheels chocked.Cevap
  3. C
    A brake friction lining measures 38\frac{3}{8} inch of remaining friction material at its thinnest point with no grease contamination.
  4. D
    A flexible rubber air brake hose exhibits a firm outer jacket with zero audible air leaks and ample clearance from axle hardware.

Cevap

A manual slack adjuster pushrod traveling 1121\frac{1}{2} inches when pulled firmly by hand with the parking brakes released and wheels chocked represents an out-of-adjustment defect requiring maintenance.
A manual slack adjuster pushrod must not move more than about 11 inch when pulled firmly by hand with the parking brakes released and wheels chocked. A measured travel of 1121\frac{1}{2} inches indicates an out-of-adjustment brake assembly that compromises braking capability and requires immediate mechanical adjustment before operation.

Adım Adım Çözüm

1
Evaluate the measured manual slack adjuster pushrod free play against regulatory inspection thresholds.
A pushrod travel of 1121\frac{1}{2} inches exceeds the maximum allowable hand-pull limit of approximately 11 inch (25 mm25\text{ mm}).
Pushrod travel beyond 11 inch indicates that the brake is out of adjustment, which significantly reduces stopping power and creates an immediate safety defect.
2
Verify the compliance of adjacent brake components and procedural conditions.
A lining thickness of 38\frac{3}{8} inch exceeds the 14\frac{1}{4} inch minimum wear limit, undamaged air hoses with proper clearance are fully roadworthy, and lack of pushrod movement under applied spring brakes reflects improper test procedure rather than a component defect.
Correctly distinguishing between normal component wear, proper operating states, and out-of-adjustment defects prevents placing roadworthy vehicles out of service while ensuring unsafe equipment is promptly repaired.

Anahtar Kavram

Brake chamber pushrod free play limits and foundation component defect identification during vehicle inspection.
Tahmini Süre:1m 0s
Bu soruyu puanla

Konular

Brake System Components Inspection

Bu konudan daha fazla soru