A motor carrier safety inspector evaluates various wheel and tire assembly conditions duri… — Commercial Driver's License (CDL) General Knowledge Exam

A motor carrier safety inspector evaluates various wheel and tire assembly conditions during a vehicle safety review. Which of the following correctly matches each identified wheel or tire condition with its specific safety hazard or regulatory violation?

Rust streaks radiating outward from the wheel mounting stud holesIndicates loose wheel lug nuts that risk wheel detachment during transit
Tread depth measuring $\frac{3}{32}\text{ inch}$ in a major groove on a front steering axle tireViolates the mandatory commercial vehicle minimum steer tire depth threshold of $\frac{4}{32}\text{ inch}$
Mixing radial and bias-ply tires on the same tandem drive axle groupCauses severe vehicle handling instability due to conflicting sidewall flex and traction characteristics
Welded bead repair visible along a structural crack on a steel wheel rimConstitutes an illegal rim repair that compromises structural integrity and creates an immediate catastrophic failure hazard

Cevap

Each wheel or tire condition matches its specific hazard: rust streaks indicate loose lug nuts;

\frac{3}{32}\text{ inch}

tread on a steer tire violates the

\frac{4}{32}\text{ inch}

minimum threshold; mixing radial and bias-ply tires causes severe handling instability; and a welded rim repair represents an illegal structural modification with severe failure risk.

The correct pairings accurately associate each physical defect with its exact regulatory and physical consequence: rust trails signify loose lug nuts;

\frac{3}{32}\text{ inch}

tread on a steer tire violates the

\frac{4}{32}\text{ inch}

federal minimum standard; mixing radial and bias plies leads to hazardous handling instability; and welded rim repairs are illegal modifications that induce sudden catastrophic wheel failure.

Adım Adım Çözüm

Analyze the mechanical signs of wheel fastener loosening

Rust trails radiating from lug holes indicate relative motion between nuts and wheel, confirming loose fasteners.

Loose wheel fasteners cause fretting corrosion, producing visible rust streaks before total lug nut separation occurs.

Evaluate steer axle tire tread depth against federal commercial vehicle standards

A measurement of

\frac{3}{32}\text{ inch}

fails the

\frac{4}{32}\text{ inch}

minimum requirement for steer tires.

Front steer tires require a minimum tread depth of

\frac{4}{32}\text{ inch}

(compared to

\frac{2}{32}\text{ inch}

on other axles) to maintain steering control and prevent hydroplaning.

Assess the impact of mismatched tire construction types on an axle

Combining radial and bias-ply tires creates handling instability.

Radial and bias tires have vastly different sidewall deflection and footprint behaviors, which destabilizes directional control.

Review regulations regarding wheel and rim integrity repairs

Welded repairs on rims are illegal and pose catastrophic failure risks.

Safety regulations prohibit welding repairs on commercial motor vehicle wheels or rims because heat alteration induces brittle failure zones.

Anahtar Kavram

Commercial Vehicle Wheel, Rim, and Tire Inspection Criteria and Regulatory Safety Thresholds

Tahmini Süre:1m 15s

Soru

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Konular

Bu konudan daha fazla soru