Examkin

Soru

Zorluk: OrtaInspecting Cargo (Responsibilities and Schedule)

A driver transporting palletized freight on a flatbed trailer completes the initial en-route securement check at mile 35. After driving an additional 75 miles over 1.5 hours, the driver stops at a travel plaza for a 30-minute meal break. According to federal CDL regulations, when is the driver required to perform the next cargo and securement inspection?

  1. A
    Only upon reaching 150 total miles from the initial departure terminal.
  2. Before resuming travel after the break, as cargo must be re-inspected whenever the driver takes a stop or changes duty status.Cevap
  3. C
    After accumulating 3 hours of continuous driving time following the departure from the travel plaza.
  4. D
    Only at the final destination, unless cargo shifting is visibly detected in the side mirrors.

Cevap

Before resuming travel after the break, as cargo must be re-inspected whenever the driver takes a stop or changes duty status.
Federal commercial motor vehicle safety regulations require drivers to inspect cargo securement before driving, within the first 50 miles, and after every stop or duty status change, as well as every 3 hours or 150 miles (whichever comes first). Stopping for a meal break triggers a mandatory securement check before resuming the trip.

Adım Adım Çözüm

1
Identify the standard federal CDL cargo inspection schedule requirements.
Regulations mandate inspecting cargo: (1) before beginning a trip, (2) within the first 50 miles of travel, and (3) en route every 3 hours or 150 miles, whichever occurs first, as well as after every break or change in duty status.
Establishing the complete set of inspection triggers is necessary to determine driver obligations under changing trip conditions.
2
Evaluate the effect of an intermediate stop on the inspection schedule.
Although neither 3 hours nor 150 miles have elapsed since the prior inspection at mile 35, taking a 30-minute meal break triggers the requirement to inspect cargo before pulling back onto the roadway.
Taking a break or altering duty status serves as an independent inspection trigger under federal safety standards.

Anahtar Kavram

En-Route Cargo Inspection Schedule and Duty Status Triggers
Tahmini Süre:1m 0s
Bu soruyu puanla

Konular

Inspecting Cargo (Responsibilities and Schedule)

Bu konudan daha fazla soru