A commercial driver operates a three-axle straight truck towing a two-axle pup trailer. The power unit has a manufacturer Gross Vehicle Weight Rating (GVWR) of , and the full setup has a Gross Combination Weight Rating (GCWR) of . At an official weigh station, the scale measures the power unit alone at and the total combined vehicle at . Based on commercial vehicle weight regulations and manufacturer ratings, which of the following assessments is correct?
- AThe vehicle is operating legally because the Gross Combination Weight Rating (GCWR) supersedes the power unit's Gross Vehicle Weight Rating (GVWR) whenever a trailing unit is connected.
- The configuration is overloaded because the power unit exceeds its individual GVWR, even though the total gross combination weight remains below the GCWR.Cevap
- CThe vehicle is operating legally as long as the total gross combination weight is below the federal statutory limit of , regardless of manufacturer ratings.
- DThe configuration is overloaded because the GCWR defines the maximum allowable weight of the power unit alone rather than the total combination.
Cevap
The configuration is overloaded because the power unit exceeds its individual GVWR, even though the total gross combination weight remains below the GCWR.
A commercial motor vehicle must comply with both individual unit ratings and combination ratings simultaneously. Although the total measured weight () is well within the Gross Combination Weight Rating of , the power unit itself () exceeds its manufacturer-specified Gross Vehicle Weight Rating of , making the vehicle overloaded and unsafe.
Adım Adım Çözüm
Anahtar Kavram
Distinct application and non-substitutability of Gross Vehicle Weight Rating (GVWR) versus Gross Combination Weight Rating (GCWR)
Tahmini Süre:1m 15s