Examkin

Soru

Zorluk: KolayStorage Devices and Interfaces

Match each storage drive form factor or interface standard to its corresponding physical or operational characteristic.

  • NVMe M.2 SSDHigh-performance solid-state drive interface utilizing PCIe bus lanes
  • SATA III SSDInternal drive interface standard limited to a maximum bandwidth of 6 Gbps
  • eSATAExternal interface standard allowing direct connection of SATA storage drives at full bus speed
  • MicroSD CardSmall form factor removable flash storage card commonly used in mobile electronics

Cevap

NVMe M.2 SSD matches High-performance solid-state drive interface utilizing PCIe bus lanes; SATA III SSD matches Internal drive interface standard limited to a maximum bandwidth of 6 Gbps; eSATA matches External interface standard allowing direct connection of SATA storage drives at full bus speed; MicroSD Card matches Small form factor removable flash storage card commonly used in mobile electronics.
Each storage technology is matched to its correct hardware definition: NVMe M.2 uses PCIe bus lanes for peak performance; SATA III caps internal drive speed at 6 Gbps; eSATA provides direct external connection for SATA drives; MicroSD cards serve as portable flash memory for mobile devices.

Adım Adım Çözüm

1
Identify the high-speed solid-state protocol using PCIe bus lanes
Match NVMe M.2 SSD with High-performance solid-state drive interface utilizing PCIe bus lanes
NVMe is engineered specifically for flash memory to bypass legacy AHCI bottlenecks by leveraging PCI Express lanes.
2
Determine the throughput capability of the internal SATA III standard
Match SATA III SSD with Internal drive interface standard limited to a maximum bandwidth of 6 Gbps
SATA Revision 3.0 has a maximum theoretical bandwidth of 6 Gbps (roughly 600 MB/s actual throughput).
3
Identify the external implementation of the SATA protocol
Match eSATA with External interface standard allowing direct connection of SATA storage drives at full bus speed
eSATA allows internal SATA drives to be attached externally without needing USB bridge conversion overhead.
4
Identify the compact removable flash memory form factor for mobile devices
Match MicroSD Card with Small form factor removable flash storage card commonly used in mobile electronics
MicroSD is the standard miniature flash card format used in mobile phones, cameras, and single-board computers.

Anahtar Kavram

Storage drive interfaces, protocols, and form factor identification.
Bu soruyu puanla

Konular

Storage Devices and Interfaces

Bu konudan daha fazla soru