Examkin

Soru

Zorluk: KolayNetworking Ports and Protocols

A network technician is setting up a local server intended to automatically assign dynamic IP addresses and default gateways to workstations on the subnetwork. Which port and transport layer protocol combination must be allowed on the server to support this service?

  1. UDP port 67Cevap
  2. B
    UDP port 53
  3. C
    TCP port 67
  4. D
    TCP port 80

Cevap

UDP port 67 is the correct choice because Dynamic Host Configuration Protocol (DHCP) servers receive incoming client configuration requests on UDP port 67.
Dynamic Host Configuration Protocol (DHCP) server software listens on User Datagram Protocol (UDP) port 67 to receive discovery and request messages from network hosts requiring automatic IP configuration.

Adım Adım Çözüm

1
Identify the required network service based on the scenario description.
The server automatically assigns IP addresses and network configuration parameters, which defines the function of Dynamic Host Configuration Protocol (DHCP).
Recognizing the functional definition identifies the protocol being queried.
2
Determine the transport protocol and port number assigned to the DHCP server role.
DHCP operates over UDP, using port 67 on the server side and port 68 on the client side.
Broadcast-based IP address distribution requires connectionless datagram traffic before an endpoint has configured its IP stack.

Anahtar Kavram

Dynamic Host Configuration Protocol (DHCP) Port Assignment
Bu soruyu puanla

Konular

Networking Ports and Protocols

Bu konudan daha fazla soru