Examkin

Soru

Zorluk: ZorWindows Client Networking Configuration

A help desk technician needs to assign a static IPv4 address, subnet mask, default gateway, and preferred DNS server to a Windows 11 client using the legacy Control Panel interface. What is the correct sequence of steps the technician should take to apply these networking settings?

  1. 1Open the Windows Run dialog box, enter ncpa.cpl, and press Enter to launch Network Connections.
  2. 2Right-click the active Ethernet network interface card and select Properties.
  3. 3Highlight Internet Protocol Version 4 (TCP/IPv4) in the network components list and click the Properties button.
  4. 4Select the 'Use the following IP address' radio button and enter the assigned IPv4 address, Subnet mask, and Default gateway.
  5. 5Select 'Use the following DNS server addresses', enter the primary DNS server IP address, and click OK to confirm the changes.

Cevap

The correct operational sequence begins with launching ncpa.cpl, opening adapter properties, navigating into IPv4 properties, toggling static address radio buttons to input IP data, and populating static DNS details before clicking OK.
Configuring static client IPv4 parameters in Windows via ncpa.cpl demands a top-down administrative workflow: invoking the network connections applet, opening the network adapter properties, opening the TCP/IPv4 properties item, selecting the static addressing radio button, and completing the IP and DNS field entries before saving.

Adım Adım Çözüm

1
Launch ncpa.cpl using the Run dialog.
The Network Connections window opens displaying all physical and virtual network adapters.
Shortcuts like ncpa.cpl bypass modern Settings menus to directly access legacy network interface tools.
2
Open properties for the Ethernet interface.
The Ethernet Properties window appears, displaying client protocols and services.
Adapter-level properties must be opened to edit protocol configurations bound to that physical NIC.
3
Access Internet Protocol Version 4 (TCP/IPv4) properties.
The TCP/IPv4 configuration dialog box displays current DHCP or static addressing settings.
IPv4 network configuration settings are contained within this specific protocol layer item.
4
Enable and populate static IP address fields.
Text fields for IP address, Subnet mask, and Default gateway become active and receive input values.
By default, Windows uses dynamic allocation; selecting the static radio button un-greys the entry fields.
5
Specify primary DNS server settings and save.
DNS address is saved and the entire IPv4 configuration is committed to the interface.
Saving the dialog commits all configured static parameters to the active adapter context.

Anahtar Kavram

Windows Network Adapter IPv4 GUI Configuration Sequence
Bu soruyu puanla

Konular

Windows Client Networking Configuration

Bu konudan daha fazla soru