Examkin

Soru

Zorluk: ZorCPU Architecture Cooling and Sockets

An IT analyst is evaluating hardware for a edge node deployment that must run legacy 64-bit x86 virtualized applications. The procurement team has proposed low-power single-board computers powered by ARM-based System-on-Chip (SoC) processors. Which CPU architectural characteristic explains why the ARM processors cannot natively execute these legacy 64-bit x86 virtual machines?

  1. ARM processors use a Reduced Instruction Set Computer (RISC) architecture, which has an instruction set incompatible with CISC-based x86_64 binaries.Cevap
  2. B
    ARM processors use hypervisor-level Type 1 guest OS locking, which restricts bare-metal host hypervisor installation.
  3. C
    ARM processors utilize Ball Grid Array (BGA) surface mounting, which disables dual-channel RAM allocation required for 64-bit operating systems.
  4. D
    ARM processors rely on passive thermal heatsinks, which lack the thermal design power (TDP) bandwidth needed to process 64-bit registers.

Cevap

ARM processors use a Reduced Instruction Set Computer (RISC) architecture, which has an instruction set fundamentally incompatible with CISC-based x86_64 software binaries.
ARM processors are built on a Reduced Instruction Set Computer (RISC) architecture, which uses a streamlined, fixed-length instruction set optimized for energy efficiency. In contrast, x86 and x86_64 processors use a Complex Instruction Set Computer (CISC) architecture. Because machine code compiled for x86_64 expects x86 CISC instructions and registers, an ARM CPU cannot natively decode or execute x86_64 software binaries.

Adım Adım Çözüm

1
Analyze the workload requirements given in the scenario.
The target edge system must execute legacy software compiled specifically for the 64-bit x86 (x86_64) architecture.
Software binaries are compiled into machine code instructions specific to a target CPU instruction set architecture (ISA).
2
Compare CPU architecture types (ARM vs x86).
x86/x64 processors implement Complex Instruction Set Computer (CISC) design, whereas ARM processors implement Reduced Instruction Set Computer (RISC) design.
RISC and CISC architectures utilize different instruction decoding logic, register structures, and machine code representations.
3
Determine the limitation of running CISC binaries on RISC hardware natively.
Without an emulation layer or binary translator (which introduces significant performance overhead), an ARM processor cannot interpret x86_64 machine code instructions.
Native execution requires direct hardware execution of machine instructions by the CPU execution units.

Anahtar Kavram

CPU Instruction Set Architectures (RISC vs CISC / ARM vs x86_64)
Bu soruyu puanla

Konular

CPU Architecture Cooling and Sockets

Bu konudan daha fazla soru