Examkin

Soru

Zorluk: ZorPrinter and Multifunction Device Issues

A field service technician is dispatched to address a high-volume departmental laser printer that consistently jams when feeding paper from Tray 2, while manual feed Tray 1 functions without issue. Physical inspection shows media crumpling right before reaching the registration roller assembly. What is the correct sequence of steps the technician should take to diagnose and resolve this issue in accordance with the CompTIA troubleshooting methodology?

  1. 1Identify the problem by gathering information from users, reviewing printer event logs, and observing paper movement and crumpling during Tray 2 feed cycles.
  2. 2Establish a theory of probable cause by suspecting worn Tray 2 pickup/feed rollers or a failing feed-path solenoid mechanism.
  3. 3Test the theory by conducting component diagnostics to inspect Tray 2 pickup roller wear and verify solenoid clutch actuation.
  4. 4Establish a plan of action and implement the solution by replacing the Tray 2 pickup roller assembly and feed roller kit.
  5. 5Verify full system functionality by printing a multi-page test batch from Tray 2 and clean surrounding feed sensors as a preventive measure.
  6. 6Document findings, actions, and outcomes, including part replacements and log clearings, in the central ticketing system.

Cevap

The proper troubleshooting sequence follows CompTIA's standard 6-step model: 1) Identify the problem through observation and log analysis, 2) Establish a theory of probable cause regarding the Tray 2 feed mechanism, 3) Test the theory by inspecting components, 4) Establish a plan of action and implement the solution by replacing worn rollers, 5) Verify full functionality by running test prints and performing preventive cleaning, and 6) Document all findings, actions, and outcomes.
CompTIA defines a strict 6-step troubleshooting methodology: 1. Identify the problem (gather information, duplicate problem, examine logs), 2. Establish a theory of probable cause (question the obvious), 3. Test the theory to determine cause (confirm hypothesis), 4. Establish a plan of action to resolve the problem and implement the solution, 5. Verify full system functionality and, if applicable, implement preventive measures, and 6. Document findings, actions, and outcomes.

Adım Adım Çözüm

1
Identify the problem
Technician gathers logs and inspects physical symptoms of paper crumpling at Tray 2.
Troubleshooting must begin by gathering empirical evidence and user reports.
2
Establish a theory of probable cause
Technician hypothesizes worn Tray 2 pickup rollers or solenoid timing failure.
Formulating a targeted hypothesis narrows down potential hardware faults.
3
Test the theory to determine cause
Technician inspects roller friction pads and runs hardware diagnostics on solenoids.
Theory testing validates whether the physical cause is indeed worn rollers before ordering or replacing parts.
4
Establish a plan of action and implement the solution
Technician replaces the Tray 2 pickup roller assembly and feed rollers.
Replacing verified worn parts resolves the underlying mechanical failure.
5
Verify full system functionality and implement preventive measures
Technician prints test pages from Tray 2 and cleans optical feed path sensors.
Functional verification confirms complete repair and preventive measures minimize future failures.
6
Document findings, actions, and outcomes
Technician logs the work details and replaced part numbers in the ticketing database.
Documentation provides historical context and reference knowledge for future support calls.

Anahtar Kavram

CompTIA 6-Step Troubleshooting Methodology Applied to Hardware/Printer Diagnostics
Bu soruyu puanla

Konular

Printer and Multifunction Device Issues

Bu konudan daha fazla soru