Examkin

Soru

Zorluk: ZorNetwork and Peripheral Cables and Connectors

A network administrator is connecting a workstation to an external storage array designed for ultra-high-speed audio/video editing. The storage array specifies a requirement for a 40 Gbps data transfer rate and 85W Power Delivery over a single cable connection. The technician connects the storage array to the workstation's Thunderbolt 4 USB Type-C port using a standard, unbranded passive USB Type-C cable labeled '10 Gbps'. Although the workstation recognizes the drive, throughput maxes out at 10 Gbps and the laptop reports slow charging. Which of the following best explains why the connection failed to achieve full operational capacity?

  1. The installed USB Type-C cable lacks the active circuitry and protocol rating required to negotiate high-bandwidth Thunderbolt communication and high-wattage power profiles.Cevap
  2. B
    The host port automatically downgrades all connected peripherals to legacy USB speeds whenever a non-DisplayPort protocol is detected on the physical USB Type-C connector.
  3. C
    High-bandwidth data transfer rates above 20 Gbps require a dedicated external PCI Express riser card connected directly to a PCIe slot on the host system motherboard.
  4. D
    The cable wiring uses a T568A pinout standard on one end and a T568B pinout on the other, creating a crossover configuration that forces half-duplex communication.

Cevap

The installed USB Type-C cable lacks the active circuitry and protocol rating required to negotiate high-bandwidth Thunderbolt communication and high-wattage power profiles.
While USB Type-C defines the physical connector shape, the underlying capabilities depend on the protocol rating of the host controller, peripheral, and cable. Achieving 40 Gbps Thunderbolt throughput and high-wattage charging requires a cable specifically rated and electronically marked for Thunderbolt 3/4. Connecting devices with a standard 10 Gbps USB 3.2 cable causes the host to safely fall back to 10 Gbps data speeds and standard baseline power output.

Adım Adım Çözüm

1
Analyze physical connector versus protocol capabilities
Identified that while the host port and peripheral both support Thunderbolt 4 (40 Gbps), the physical cable in use is only rated for USB 3.2 Gen 2 (10 Gbps).
Physical USB Type-C connectors host multiple independent protocol standards depending on host controller, device, and cable rating.
2
Evaluate the cable limitations
Confirmed that passive 10 Gbps USB-C cables do not feature the electronically marked microcontrollers (E-markers) or high-frequency wire pairs necessary for 40 Gbps Thunderbolt communication.
Thunderbolt 3 and 4 require specific cable certification and construction to maintain signal integrity at 40 Gbps.
3
Determine the root cause of degraded throughput and power delivery
The connection falls back to the highest common denominator supported by all three elements (host, device, and cable), which is 10 Gbps USB data and basic power delivery.
USB-C specification mandates fallback to safe operational parameters when cable ratings cannot verify higher power or bandwidth modes.

Anahtar Kavram

Physical USB-C Connector vs. Protocol Standards (Thunderbolt 3/4 and USB Cable Ratings)
Bu soruyu puanla

Konular

Network and Peripheral Cables and Connectors

Bu konudan daha fazla soru