Examkin

Soru

Zorluk: OrtaWindows Client Networking Configuration

A field technician is setting up a Windows 11 laptop for an engineer who regularly moves between a corporate office with an active DHCP server and a field office that lacks a DHCP server. The engineer requires a specific static IP configuration (192.168.50.100/24192.168.50.100/24) at the field office without needing to manually reconfigure network settings upon arrival. Which property tab within the Internet Protocol Version 4 (TCP/IPv4) Properties dialog box should the technician configure?

  1. Alternate ConfigurationCevap
  2. B
    Advanced TCP/IP Settings
  3. C
    General
  4. D
    Network Identification

Cevap

The Alternate Configuration tab should be configured to automatically apply static IP parameters when no DHCP server is detected on the connected network.
The Alternate Configuration tab in Windows TCP/IPv4 Properties allows network administrators to define a static IPv4 configuration that the operating system automatically applies whenever the network adapter is configured to obtain an IP address automatically but fails to contact a local DHCP server.

Adım Adım Çözüm

1
Analyze the client network requirements across both locations.
The corporate environment provides dynamic addressing via DHCP, whereas the field site requires a specific static IP address (192.168.50.100/24192.168.50.100/24) without an available DHCP server.
The system requires an automated fallback mechanism to switch addressing modes based on DHCP availability.
2
Examine the configuration options in TCP/IPv4 properties.
The General tab is set to 'Obtain an IP address automatically', which enables the Alternate Configuration tab.
Windows checks the Alternate Configuration settings only when the network adapter is set to request an automatic IP address and the DHCP discovery request times out.
3
Configure the static parameters under the Alternate Configuration tab.
Entering the static IP address, subnet mask, default gateway, and DNS server details ensures seamless connectivity at both locations.
When connected to the field site, Windows defaults to these specified user-configured settings after receiving no DHCP response, avoiding APIPA auto-configuration (169.254.x.x169.254.x.x).

Anahtar Kavram

Windows TCP/IPv4 Alternate IP Configuration
Bu soruyu puanla

Konular

Windows Client Networking Configuration

Bu konudan daha fazla soru