A network technician is preparing to terminate custom Category 6A Shielded Twisted Pair (STP) Ethernet patch cables following the ANSI/TIA-568B (T568B) wiring standard for a factory floor environment with high electromagnetic interference (EMI). Which of the following statements correctly describe the cabling and pinout specifications required for this deployment? (Select TWO.)
- Pins 1 and 2 must be wired with the White/Orange and Orange conductors respectively.Cevap
- The cable's grounding shield and drain wire must be properly connected to shielded RJ45 connectors to mitigate environmental EMI.Cevap
- CPins 1 and 2 must be wired with the White/Green and Green conductors respectively to complete the T568B pinout order.
- DPins 4 and 5 must be swapped with Pins 7 and 8 at one end of the cable to enable 10Gbps transmission speeds.
Cevap
The T568B wiring standard requires Pin 1 to be White/Orange and Pin 2 to be Orange. Furthermore, deploying Shielded Twisted Pair (STP) in high EMI environments requires connecting the foil shield and drain wire to shielded RJ45 connectors.
The T568B wiring color scheme places the orange pair on pins 1 (White/Orange) and 2 (Orange). When installing Shielded Twisted Pair (STP) in environments subject to electromagnetic noise, properly terminating the internal shielding layer to conductive RJ45 connectors ensures continuous grounding protection against signal degradation.
Adım Adım Çözüm
Anahtar Kavram
T568B Pinout Standards and STP Shield Termination