A network technician is assembling a telecommunications rack in a satellite office to support workstation drop cables and voice-over-IP (VoIP) phones. The implementation requires punch-down termination for the permanent horizontal Category 6 cable runs coming from wall outlets, as well as delivering direct DC power over network cabling to the VoIP handsets within the local Layer 2 broadcast domain. Which TWO of the following hardware components should the technician install to fulfill these specific requirements?
- Patch panelCevap
- PoE-capable switchCevap
- CLayer 3 router
- DDHCP relay agent
Cevap
The technician must install a patch panel and a PoE-capable switch.
The combination of a patch panel and a PoE-capable switch fulfills both requirements. The patch panel receives and terminates the permanent horizontal runs from wall outlets onto punch-down blocks, protecting the cables from wear. Short RJ45 patch cables then connect the patch panel ports to the PoE switch, which forwards Ethernet frames within the local broadcast domain and provides DC power over the network cables to operate the VoIP phones.
Adım Adım Çözüm
Anahtar Kavram
Structured Cabling Termination and Power over Ethernet (PoE) Provisioning