Examkin

Soru

Zorluk: OrtaNetwork Hardware Devices

A network technician is organizing the equipment room for a newly expanded office floor. Match each network hardware device to its primary functional description within the network infrastructure.

  • Managed Layer 2 SwitchForwards network frames using MAC address tables and supports VLAN segmentation across local switch ports
  • Patch PanelTerminates structured copper cabling runs from wall outlets and connects them to switch ports without active signal processing
  • PoE InjectorAdds direct electrical power to an Ethernet link to power a remote wireless access point connected to a non-PoE switch port
  • Media ConverterTransitions Ethernet signals between unshielded twisted-pair (UTP) copper cables and fiber-optic cabling

Cevap

Managed Layer 2 Switch connects to the description involving MAC address frame forwarding and VLAN support; Patch Panel connects to passive cable termination from wall outlets; PoE Injector connects to adding electrical power to Ethernet runs for non-PoE switches; Media Converter connects to transitioning signals between copper UTP and fiber cabling.
Each hardware device performs a specific role: Managed Layer 2 switches handle MAC-based frame forwarding and VLAN management at Layer 2; patch panels act as passive Layer 1 cable organizers; PoE injectors insert power into Ethernet runs for non-PoE switches; media converters convert signals between copper and fiber physical media.

Adım Adım Çözüm

1
Analyze the role of a Managed Layer 2 Switch.
It directs Data Link layer frames using MAC addresses and enables VLAN configuration for traffic isolation.
Layer 2 switching relies on hardware address learning and port-level VLAN tagging.
2
Analyze the function of a Patch Panel.
It serves as a static cable management point terminating structured cabling runs without modifying network signals.
Patch panels contain no processing circuitry and act purely as physical connection hubs.
3
Determine the usage of a PoE Injector.
It combines data from a standard Ethernet port with DC power onto a single cable run.
This device is required when powering PoE end-devices via legacy or non-PoE network switch ports.
4
Identify the purpose of a Media Converter.
It converts electrical signals on copper cabling to light pulses on fiber-optic cable (or vice versa).
Media conversion overcomes copper distance limits (100 meters) by interfacing with fiber infrastructure.

Anahtar Kavram

Network Hardware Device Functions and OSI Layer Roles
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Network Hardware Devices

Bu konudan daha fazla soru