Examkin

Hardware

445 soru

Tüm türler445Çoktan seçmeli225Çoklu seçim101Sayısal6Eşleştirme94Sıralama19
Soru 181Soru →

A systems technician is configuring a video editing workstation. The peak power requirements for the hardware components are as follows:

- Central Processing Unit (CPU): 105 W105\text{ W}
- Two dedicated PCI Express capture cards: 75 W75\text{ W} each
- Motherboard, system RAM, and active cooling fans combined: 85 W85\text{ W}

To prevent system instability and maintain PSU power efficiency, IT policy dictates incorporating a 25%25\% safety headroom buffer above the total peak component power draw. What is the minimum recommended power supply unit (PSU) output rating, in Watts (WW), required for this build?

Cevabı ve açıklamayı göster

Cevap: 425

Cevap

The minimum recommended power supply unit rating is 425 W.
To determine the required power supply capacity, sum the peak power usage of all individual components: 105 W105\text{ W} for the CPU, 150 W150\text{ W} (2×75 W2 \times 75\text{ W}) for the capture cards, and 85 W85\text{ W} for the motherboard, memory, and fans, giving a total continuous load of 340 W340\text{ W}. Applying the required 25%25\% headroom (340 W×1.25340\text{ W} \times 1.25) yields 425 W425\text{ W}.

Adım Adım Çözüm

1
Calculate the total baseline wattage requirement of all installed hardware components.
105 W+(2×75 W)+85 W=340 W105\text{ W} + (2 \times 75\text{ W}) + 85\text{ W} = 340\text{ W} total peak draw.
Both expansion cards must be accounted for alongside the CPU and core system components.
2
Apply the mandatory 25% safety headroom buffer to the total baseline wattage.
340 W×1.25=425 W340\text{ W} \times 1.25 = 425\text{ W}.
Adding a 25% margin ensures the PSU operates within its ideal efficiency curve and prevents thermal shutdown during power spikes.

Anahtar Kavram

Power supply unit (PSU) wattage sizing and safety headroom calculation
Soru 182Soru →

An IT support technician is reviewing the electrophotographic (EP) printing cycle to troubleshoot image quality issues on a office laser printer. Arrange the following EP laser printing steps in the correct chronological order from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence of electrophotographic printing steps is Processing, Charging, Exposing, Developing, and Transferring.
The electrophotographic (EP) laser printing process follows a strict 7-step cycle. The first five steps in order are Processing (rasterizing image in RAM), Charging (applying high negative voltage to the photosensitive drum), Exposing (writing latent image with laser), Developing (attaching toner to exposed areas), and Transferring (moving toner onto paper via positive charge).

Adım Adım Çözüm

1
Identify the data rendering phase in printer memory.
Processing converts print commands into a rasterized bitmap.
Page contents must be generated in memory before hardware components begin physical imaging.
2
Prepare the photosensitive drum surface with a uniform electrical charge.
Charging conditions the drum with a uniform negative charge (typically -600V).
A uniform baseline potential is required so laser exposure can later alter specific regions.
3
Write the latent image onto the photosensitive drum.
Exposing uses a laser to illuminate the drum, reducing the negative charge on selected points.
This leaves an invisible electrostatic pattern corresponding to the page text and images.
4
Apply toner powder to the electrostatic latent image.
Developing transfers negatively charged toner onto the drum's exposed lower-potential areas.
Toner adheres only to areas where the laser neutralised the uniform negative charge.
5
Relocate toner from the drum to the physical media.
Transferring uses a strong positive charge behind the paper to pull toner off the drum.
Opposite electrical charges drive the physical transfer of toner onto the paper.

Anahtar Kavram

Electrophotographic (EP) Laser Printing Process Sequence
Soru 183Soru →

A technician is installing an M.2 solid-state drive into an M.2 connector on a motherboard. The motherboard documentation specifies that this particular M.2 slot is wired internally for the SATA bus protocol only. If the technician installs a PCIe-only NVMe M.2 drive into this slot, which of the following will occur?

Cevabı ve açıklamayı göster

Cevap: The drive will not be recognized by the system BIOS/UEFI.

Cevap

The drive will not be recognized by the system BIOS/UEFI.
While an M.2 NVMe drive may physically fit into an M.2 slot, motherboard slots wired strictly for the SATA protocol lack the necessary PCIe trace lines. Without PCIe bus connections, the host controller cannot communicate with the NVMe drive, rendering it completely unrecognized by the BIOS/UEFI.

Adım Adım Çözüm

1
Analyze the bus protocol supported by the motherboard's M.2 slot.
The slot is connected electrically only to the SATA bus controller.
M.2 connectors can be routed to PCIe lanes, SATA controller traces, or both depending on motherboard design.
2
Identify the requirement of the installed M.2 drive.
The drive is a PCIe-only NVMe storage module requiring active PCIe bus lanes.
NVMe drives lack legacy SATA host controller signaling hardware.
3
Determine the functional outcome of the protocol mismatch.
The host system fails to detect the storage module during initialization.
Without PCIe signal routing to the slot, the drive cannot transmit data to the host system and remains unlisted in BIOS/UEFI.

Anahtar Kavram

M.2 Bus Protocol Compatibility
Soru 184Soru →

A desktop technician is configuring a workstation to output to a high-resolution display requiring a 3840×21603840 \times 2160 resolution at 60 Hz60\text{ Hz} along with multi-channel digital audio. Which of the following cable types natively support transmitting both the digital video signal at this resolution and embedded multi-channel digital audio over a single cable connection without additional adapters? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: DisplayPort cable; HDMI cable

Cevap

The correct options are DisplayPort cable and HDMI cable.
DisplayPort and HDMI are modern digital display standards engineered to carry high-bandwidth digital video signals (such as 4K at 60 Hz) along with embedded multi-channel digital audio over a single cable.

Adım Adım Çözüm

1
Identify the video resolution and audio requirements.
The scenario requires single-cable transmission for 3840×21603840 \times 2160 (4K) at 60 Hz60\text{ Hz} along with embedded multi-channel digital audio.
Evaluating cable specifications against resolution, refresh rate, and audio capabilities is necessary to select appropriate interfaces.
2
Evaluate the capabilities of HDMI and DisplayPort.
Both HDMI (version 2.0+) and DisplayPort (version 1.2+) standards natively support 4K resolution at 60 Hz60\text{ Hz} and carry multi-channel digital audio.
These modern digital standards were specifically designed for high bandwidth video and integrated digital audio streams.
3
Evaluate DVI-D and VGA interfaces.
VGA is an analog video-only standard that cannot carry digital audio. Single-Link DVI-D is limited to 1920×12001920 \times 1200 at 60 Hz60\text{ Hz} and standard DVI specifications do not carry audio.
Legacy analog cables and single-link digital interfaces lack the bandwidth and audio features required.

Anahtar Kavram

Display cable bandwidth, resolution capabilities, and digital audio signal integration
Soru 185Soru →

A system technician is reviewing hardware specifications to upgrade enterprise desktop computers from DDR4 to DDR5 memory. The technician notes that DDR5 memory modules move voltage regulation from the motherboard directly onto the memory module using an onboard Power Management Integrated Circuit (PMIC). Which of the following is a primary operational advantage of including an onboard PMIC on DDR5 RAM modules?

Cevabı ve açıklamayı göster

Cevap: Provides fine-grained, localized voltage regulation and improved power efficiency directly on the memory module

Cevap

Provides fine-grained, localized voltage regulation and improved power efficiency directly on the memory module
In DDR5 memory architecture, voltage regulation is shifted from the motherboard VRM onto the module itself using an onboard Power Management Integrated Circuit (PMIC). This design provides more precise local power control, reduces voltage drop and noise, improves power efficiency, and allows individual modules to manage their power requirements independently.

Adım Adım Çözüm

1
Identify the key hardware architectural change introduced in DDR5 memory.
DDR5 integrates a Power Management Integrated Circuit (PMIC) directly on the printed circuit board (PCB) of each DIMM.
Previous memory standards like DDR4 relied on the motherboard's voltage regulator module (VRM) to supply power.
2
Analyze the functional impact of moving voltage regulation to the memory module.
PMIC placement on the module allows for localized voltage management, cleaner power delivery, reduced signal noise, and better energy management per module.
This structural change lowers motherboard routing complexity and improves voltage stability at higher clock frequencies.

Anahtar Kavram

DDR5 Power Management Integrated Circuit (PMIC) Architecture
Tahmini Süre:1m 0s
Soru 186Soru →

A technician is replacing a failed desktop motherboard inside a standard ATX mid-tower chassis with a replacement Micro-ATX motherboard. Which of the following statements correctly describe the compatibility and installation requirements for this hardware upgrade? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: The Micro-ATX motherboard can be mounted into the existing ATX chassis by repositioning the brass case standoffs to match the mounting hole layout of the smaller board.; The Micro-ATX motherboard will offer fewer maximum expansion slots than the standard ATX motherboard it replaces.

Cevap

Micro-ATX motherboards can be installed inside standard ATX chassis by adjusting the brass standoffs to align with the smaller board's mounting pattern, and Micro-ATX boards provide a maximum of 4 expansion slots compared to 7 on standard ATX boards.
Micro-ATX motherboards (9.6 x 9.6 inches) are designed to be backward compatible with standard ATX cases (12 x 9.6 inches) by moving brass standoffs to match the Micro-ATX mounting pattern. Because of the reduced vertical length, Micro-ATX motherboards feature a maximum of 4 expansion slots, whereas standard ATX motherboards feature up to 7 expansion slots.

Adım Adım Çözüm

1
Evaluate chassis and mounting compatibility between ATX and Micro-ATX form factors.
ATX chassis are backward-compatible with Micro-ATX boards because screw hole placement standards align, though standoffs must be moved to avoid short-circuiting the smaller board.
Ensures proper mechanical fit and electrical safety when installing a smaller board into a larger case.
2
Compare expansion capability limits between ATX and Micro-ATX form factors.
Micro-ATX boards measure up to 9.6 x 9.6 inches and support a maximum of 4 expansion slots, whereas standard ATX (12 x 9.6 inches) supports up to 7 slots.
Identifies the structural constraints associated with selecting a Micro-ATX form factor.

Anahtar Kavram

Motherboard Form Factor Backward Compatibility and Dimensions
Tahmini Süre:1m 15s
Soru 187Soru →

A system administrator is upgrading desktop computers in a training facility. The new workstations only feature DisplayPort outputs, but the existing wall-mounted monitors only have analog VGA ports. When a technician uses a passive DisplayPort-to-VGA adapter cable to connect a workstation to a monitor, the display remains blank. Which of the following explains why the video signal fails to display and identifies the necessary hardware to resolve the issue?

Cevabı ve açıklamayı göster

Cevap: DisplayPort natively outputs digital signals while VGA requires analog signals, so an active adapter with an integrated Digital-to-Analog Converter (DAC) is required.

Cevap

DisplayPort natively outputs digital signals while VGA requires analog signals, so an active adapter with an integrated Digital-to-Analog Converter (DAC) is required.
DisplayPort outputs digital video signals, whereas VGA requires analog RGB signals. A passive adapter cable only rewires matching pins and cannot perform signal translation. To connect a digital DisplayPort output to an analog VGA input, an active converter containing an integrated Digital-to-Analog Converter (DAC) is required to transform the digital data into analog signals.

Adım Adım Çözüm

1
Identify the signal types of the host output interface and the display input interface.
DisplayPort produces digital signals, whereas VGA accepts analog signals.
Understanding signal format compatibility determines whether passive adapter pin-outs or active hardware conversions are required.
2
Evaluate the capability of passive adapter cables between DisplayPort and VGA.
Passive cables only rearrange physical pins and cannot convert digital stream data into analog voltage levels.
DisplayPort dual-mode (DP++) can output passive DVI/HDMI digital signals, but cannot natively output analog VGA signals without active conversion hardware.
3
Determine the required adapter type to complete signal conversion.
An active DisplayPort-to-VGA adapter containing a powered DAC chip must be installed.
The DAC chip actively receives the digital packet stream from DisplayPort and translates it into analog RGB voltage signals for VGA.

Anahtar Kavram

Active vs. Passive Video Signal Conversion
Tahmini Süre:1m 0s
Soru 188Soru →

An IT technician is installing a manufacturer-provided preventive maintenance kit on a high-volume office electrophotographic (EP) laser printer. Which TWO of the following components are standard parts of this maintenance kit replacement process?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Fuser assembly; Paper pickup and separation rollers

Cevap

The fuser assembly and the paper pickup and separation rollers are standard components included in laser printer preventive maintenance kits.
Standard laser printer maintenance kits consist of components exposed to constant physical wear and heat cycles. The fuser assembly (which uses heat and pressure to permanently bond toner to paper) and the paper pickup and separation rollers (which experience rubber degradation and traction loss) are standard items intended for scheduled replacement.

Adım Adım Çözüm

1
Identify high-wear consumable components in electrophotographic (EP) laser printers.
Components subjected to physical friction (paper pickup/separation rollers) and high thermal/mechanical stress (fuser assembly) degrade predictably over time.
Preventive maintenance kits target components that regularly wear out from friction and heat to avoid unexpected failures.
2
Distinguish between routine consumable kit components and permanent internal hardware.
The fuser assembly and rubber rollers are intended for periodic user or technician replacement, whereas internal electronics (HVPS) and optical optics (laser scanner module) are non-consumable structural parts.
Non-consumable structural assemblies are only serviced or replaced upon specific diagnostic failure, not during routine preventive maintenance cycles.

Anahtar Kavram

Laser printer preventive maintenance kit components
Soru 189Soru →

A technician is installing a high-speed network expansion card that requires a PCIe x4 interface into a desktop workstation. The motherboard features one primary physical PCIe x16 slot (occupied by a graphics card), two physical PCIe x1 slots, and a secondary physical PCIe x16 slot that is electrically wired for PCIe x4 operation. Which slot should the technician select to successfully install and operate the expansion card at its full rated speed?

Cevabı ve açıklamayı göster

Cevap: The secondary physical PCIe x16 slot that is electrically wired for x4 operation

Cevap

The secondary physical PCIe x16 slot that is electrically wired for x4 operation
PCIe architecture allows smaller lane width cards to be installed into larger physical slots (known as up-plugging). Installing the PCIe x4 card into the secondary physical PCIe x16 slot electrically wired for x4 ensures both physical fit and maximum performance at x4 speed.

Adım Adım Çözüm

1
Identify the physical and electrical expansion slot requirements of the card.
The network interface card requires a physical slot of x4 size or larger and x4 electrical bandwidth.
PCIe expansion cards require both physical clearance and sufficient data lanes to operate without throughput degradation.
2
Evaluate the available motherboard expansion slots.
The primary PCIe x16 slot is occupied by the GPU, the PCIe x1 slots are too small/slow for full x4 operation, and the secondary physical PCIe x16 slot is wired electrically for x4.
PCIe cards are backward compatible with larger physical slots (up-plugging), allowing a x4 card to seat cleanly into a physical x16 slot.
3
Select the slot that provides full compatibility and bandwidth.
Installing the card into the secondary physical PCIe x16 slot (wired for x4) provides physical fit and full x4 performance.
The electrical wiring matches the maximum throughput supported by the expansion card.

Anahtar Kavram

PCIe Slot Physical vs. Electrical Compatibility (Up-plugging)
Tahmini Süre:1m 0s
Soru 190Soru →

An IT technician is organizing a workstation deployment project and must categorize various display cables and interface specifications based on their physical characteristics and capabilities. Match each display cable connector type on the left with its corresponding technical capability or physical design feature on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

DB-15 (VGA)
DVI-D Dual-Link
DisplayPort
USB-C with Alt Mode

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

DB-15 (VGA) matches the legacy 15-pin analog RGB connector; DVI-D Dual-Link matches the 24-pin digital-only interface up to 2560x1600; DisplayPort matches the 20-pin latched connector supporting MST daisy-chaining; USB-C with Alt Mode matches the reversible compact interface providing video, data, and power over one cable.
Each display connection standard is accurately paired with its distinct physical interface, pin layout, and signal delivery mechanism standard to the CompTIA A+ Core 1 objectives.

Adım Adım Çözüm

1
Identify the signal type and pin layout for DB-15 (VGA)
DB-15 is recognized as a 15-pin connector in three rows carrying purely analog signals.
VGA is an older analog display standard using the DB-15 physical shell.
2
Differentiate DVI variants by signal and bandwidth capabilities
DVI-D indicates digital-only signals, and Dual-Link adds extra digital pins allowing high resolution (2560×16002560\times 1600).
DVI-D omits the analog pins around the flat blade while Dual-Link doubles the digital transmission bandwidth.
3
Analyze DisplayPort connector design and protocol features
DisplayPort features a 20-pin connector, physical latches for retention, and MST for multi-monitor daisy-chaining.
VESA DisplayPort specifications mandate packetized video data transmission enabling MST and secure latching mechanisms.
4
Evaluate USB Type-C Alternate Mode functionality
USB-C with Alt Mode leverages reversible pins to carry native video signals (such as DisplayPort) alongside USB host data and charging power.
Alternate Mode allows non-USB protocols to transmit over physical USB-C pins.

Anahtar Kavram

Identifying physical form factors, pin configurations, signal types (analog vs digital), and advanced protocol features (MST, Alt Mode) across display interfaces.
Soru 191Soru →

An IT support technician is troubleshooting a departmental laser printer that produces pages with a persistent grey background shadow (fogging) across the entire sheet. Further inspection indicates that residual electrostatic charges from previous print jobs are remaining on the photosensitive drum immediately prior to the primary charging phase. Which component is failing to perform its role in the electrophotographic (EP) printing process?

Cevabı ve açıklamayı göster

Cevap: Discharge lamp (erase assembly)

Cevap

The discharge lamp (erase assembly) is responsible for neutralizing residual charges on the photosensitive drum.
The discharge lamp (or erase assembly) neutralizes any remaining electrostatic charge on the photosensitive drum during the cleaning and erasing phase of the EP printing cycle. If this light source fails or becomes obscured, residual voltage from prior images remains on the drum, leading to background fogging or ghost images across subsequent pages.

Adım Adım Çözüm

1
Identify the stage of the electrophotographic (EP) laser printing process where residual charges are cleared.
The final stage of the EP print cycle is cleaning and erasing.
Before the drum can receive a fresh uniform charge for a new page, previous toner remnants must be scraped off by the cleaning blade and residual electrical charges erased.
2
Determine which component executes the charge neutralization step.
The discharge lamp (or erase LED array) shines light onto the drum surface to drain remaining electrical charges to ground.
Without effective erasure, residual charges cause ghosting or background fogging when the primary charge roller conditions the drum for the next cycle.

Anahtar Kavram

Electrophotographic (EP) Laser Printing Cycle and Component Roles
Tahmini Süre:1m 0s
Soru 192Soru →

A technician is installing internal system wiring and power delivery lines on a new motherboard. Match each motherboard connector or pin header on the left with its primary function or power role on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

24-pin ATX Power Connector
4/8-pin EPS +12V Connector
Front Panel Header (FPANEL)
Molex Peripheral Connector

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The 24-pin ATX connector supplies main power to motherboard logic and memory; the 4/8-pin EPS +12V connector provides dedicated power to the CPU voltage regulators; the front panel header connects chassis buttons and status LEDs; and the Molex peripheral connector supplies +5V and +12V DC power to legacy drives or cooling components.
Each motherboard connector fulfills a specific electrical or signaling role: the 24-pin ATX connector provides primary board power, the EPS connector feeds dedicated CPU voltage regulator circuits, front panel pin headers route physical chassis switches and indicator LEDs, and Molex connectors supply peripheral DC power.

Adım Adım Çözüm

1
Identify the primary power feed required by modern motherboard chipsets and memory channels.
The 24-pin main ATX power connector supplies all primary board voltage rails (+3.3V, +5V, +12V).
Modern motherboards require a standardized multi-rail main harness to power onboard controller ICs, PCIe slots, and system RAM.
2
Identify the dedicated power header supplying power to processor voltage regulation modules.
The 4/8-pin EPS +12V connector supplies dedicated high-amperage 12V current directly to the CPU power phases.
Modern multi-core CPUs require dedicated current paths separate from the main 24-pin motherboard connector.
3
Identify the multi-pin motherboard block responsible for chassis user controls.
The Front Panel Header (FPANEL) receives pin connections from chassis momentary switches and diagnostic status LEDs.
Physical power/reset buttons and diagnostic indicators must map directly to motherboard jumper contacts.
4
Identify peripheral DC power delivery standards.
The 4-pin Molex connector delivers raw +5V and +12V DC power to auxiliary or legacy chassis hardware.
Molex is a standard 4-pin peripheral power connector used for fans, pumps, and older drive enclosures.

Anahtar Kavram

Motherboard Power Connectors and Header Pinouts
Soru 193Soru →

Match each printer technology on the left with its corresponding primary consumable or key maintenance component on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Direct Thermal Printer
Thermal Transfer Printer
Fused Deposition Modeling (FDM) 3D Printer
Impact / Dot Matrix Printer

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Direct Thermal Printer pairs with Chemically treated heat-sensitive paper stock; Thermal Transfer Printer pairs with Wax or resin print ribbon; Fused Deposition Modeling (FDM) 3D Printer pairs with Spool of thermoplastic filament (PLA/ABS); Impact / Dot Matrix Printer pairs with Ink-soaked fabric ribbon cartridge.
Each printer technology relies on specific consumables matched to its core mechanism: Direct Thermal uses chemically treated paper that reacts directly to printhead heat; Thermal Transfer melts ink from a wax or resin ribbon onto the substrate; FDM 3D printing feeds spooled thermoplastic filament through a heated nozzle; and Impact printers strike printhead pins against an ink-soaked fabric ribbon.

Adım Adım Çözüm

1
Analyze Direct Thermal printing requirements.
Direct thermal technology relies strictly on chemically treated paper that changes color when exposed to printhead heat without an intermediate ink layer.
This technology uses no ribbon, ink cartridge, or toner.
2
Analyze Thermal Transfer printing requirements.
Thermal transfer uses heat from the printhead to transfer wax or resin ink off a donor ribbon onto standard paper or durable synthetic labels.
A wax or resin ribbon is mandatory for image creation in thermal transfer printers.
3
Analyze FDM 3D printing requirements.
Fused Deposition Modeling creates three-dimensional objects layer-by-layer using spools of solid plastic filament such as PLA or ABS fed through a heated extruder.
Thermoplastic filament is the primary build consumable for FDM printers.
4
Analyze Impact / Dot Matrix printing requirements.
Dot matrix printers press mechanical pins against a continuous cloth ribbon soaked in ink to leave marks on standard or multi-part carbonless paper.
The fabric ribbon provides the ink for physical pin strikes.

Anahtar Kavram

Printer Technologies and Consumables Maintenance
Soru 194Soru →

A system builder is connecting the small, individual wire leads from a PC case to the motherboard during a custom desktop assembly. These leads include wires labeled POWER SW, RESET SW, HDD LED, and POWER LED. To which of the following motherboard locations should these connectors be attached?

Cevabı ve açıklamayı göster

Cevap: Front panel system header

Cevap

Front panel system header
The front panel system header consists of a keyed array of small pins on the motherboard specifically designed to accept the individual 1-pin and 2-pin connectors from the computer case for power, reset, and status LEDs.

Adım Adım Çözüm

1
Identify the function of the case leads (POWER SW, RESET SW, HDD LED, POWER LED).
Recognize that these are low-voltage switches and status indicators originating from the chassis controls.
Chassis controls require a centralized pin block on the motherboard to signal power states and drive activity.
2
Locate the designated motherboard interface designed for chassis switches and indicators.
Identify the Front Panel System Header (F_PANEL / JFP1).
Motherboard pin blocks are standardized by function; the front panel header uses specific pin pair orientations for switch contacts and positive/negative LED diodes.

Anahtar Kavram

Motherboard Front Panel Headers and Pin Assignments
Soru 195Soru →

A laser printer in a shared office frequently pulls multiple sheets of paper into the paper path at the same time, leading to frequent paper jams near the input tray. An IT technician confirms that the paper being used meets manufacturer specifications, is stored in a low-humidity environment, and is properly fan-separated prior to loading. Which of the following components should the technician replace to resolve this multi-sheet feeding problem?

Cevabı ve açıklamayı göster

Cevap: Separation pad

Cevap

Separation pad
The separation pad works directly with the pickup roller to ensure only a single sheet of paper enters the printer path. Over time, the rubber surface on the separation pad wears down and loses friction, causing it to fail to restrain underlying sheets when the pickup roller rotates.

Adım Adım Çözüm

1
Analyze the reported symptom and paper feed mechanics.
Multiple sheets are being pulled simultaneously from the paper tray despite using proper, dry media.
This indicates a failure in the mechanical friction barrier that isolates the single top sheet during paper pulling.
2
Evaluate the function of paper tray feed components.
The pickup roller grabs the paper, while the separation pad (or separation roller) maintains friction on underlying sheets to ensure only one page enters the paper path.
When the surface of the separation pad wears down or gets smooth, friction decreases, allowing additional sheets to slide into the tray feed assembly together.
3
Select the correct replacement part.
Replacing the worn separation pad restores proper sheet separation.
New rubber padding provides the required coefficient of friction to hold back secondary pages.

Anahtar Kavram

Laser Printer Feed Assembly Mechanics
Soru 196Soru →

A technician is installing a new motherboard and connecting cables from the power supply unit. Which TWO of the following motherboard connectors must be connected directly to the power supply to provide primary system board power and dedicated auxiliary processor power? (Select TWO.)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: 24-pin ATX main power connector; 8-pin EPS12V power connector

Cevap

The 24-pin ATX main power connector and the 8-pin EPS12V power connector must both be connected from the power supply unit to the motherboard.
The 24-pin ATX main power connector provides primary power to the motherboard logic board and integrated circuits, while the 8-pin EPS12V connector provides dedicated +12V power to the processor VRMs.

Adım Adım Çözüm

1
Identify the connector responsible for delivering core motherboard and onboard component power.
The 24-pin ATX main power connector supplies main logic power voltages (+3.3V, +5V, +12V) to the motherboard.
Without the main 24-pin connector, the motherboard chipset and expansion buses cannot receive main power.
2
Identify the connector responsible for delivering dedicated power to the processor.
The 8-pin EPS12V (or 4-pin ATX12V) connector delivers auxiliary +12V power directly to the processor's VRMs.
Modern CPUs draw high currents that exceed what the 24-pin main connector can safely supply alone.

Anahtar Kavram

Motherboard Power Connectors (24-pin ATX and 8-pin EPS12V)
Soru 197Soru →

A field technician is auditing print subsystem behavior on a commercial electrophotographic (EP) laser printer to identify where image corruption occurs during document creation. Place the following EP laser printing steps in the correct chronological order from the initial job receipt to the final paper output.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence for the electrophotographic (EP) printing process is: 1) Processing (rasterizing data in memory), 2) Charging (conditioning the drum with negative charge), 3) Exposing (writing the latent image via laser), 4) Developing (applying toner to exposed drum areas), 5) Transferring (attracting toner to paper using positive charge), and 6) Fusing (melting toner onto paper with heat and pressure).
The standard CompTIA electrophotographic (EP) printing process follows seven primary steps: Processing, Charging, Exposing, Developing, Transferring, Fusing, and Cleaning. Processing translates the document into a bitmap image in memory. Charging applies a high negative charge across the photosensitive drum. Exposing uses a laser to lower the voltage on specific areas of the drum, creating a latent electrostatic image. Developing transfers toner onto those exposed areas. Transferring uses positive charge on the back of the paper to pull toner off the drum onto the paper. Finally, Fusing uses heat and pressure rollers to permanently fuse toner into the paper fibers.

Adım Adım Çözüm

1
Identify the data rendering phase.
Processing is identified as the initial step where print commands are rasterized into a bitmap in memory.
The printer must build the page image in memory before physical drum manipulation can begin.
2
Identify the drum preparation phase.
Charging is placed second.
The primary charge roller conditions the photosensitive drum surface with a uniform negative charge.
3
Identify the optical writing phase.
Exposing is placed third.
The laser beam scans the drum to neutralize specific areas, leaving a latent electrostatic image.
4
Identify the toner application phase.
Developing is placed fourth.
Negatively charged toner moves from the developer roller to the higher potential (discharged) areas on the drum.
5
Identify the paper contact and image transfer phase.
Transferring is placed fifth.
The transfer roller charges the paper positively to pull toner particles off the drum onto the paper.
6
Identify the final bonding phase.
Fusing is placed sixth.
Heat and pressure melt and press the toner permanently into the paper fibers.

Anahtar Kavram

Electrophotographic (EP) Laser Printing Process Sequence
Soru 198Soru →

A technician is building a small-form-factor (SFF) workstation for a client who requires a dedicated PCIe x16 graphics card and dual-channel memory. The custom desktop enclosure selected by the client strictly limits internal motherboard dimensions to 6.7 inches×6.7 inches6.7\text{ inches} \times 6.7\text{ inches} (17 cm×17 cm17\text{ cm} \times 17\text{ cm}). Which of the following motherboard form factors must the technician select to meet these physical constraints while supporting a single expansion slot?

Cevabı ve açıklamayı göster

Cevap: Mini-ITX

Cevap

Mini-ITX is the correct form factor because it measures exactly 6.7 inches by 6.7 inches (17 cm by 17 cm) and features a single expansion slot.
The Mini-ITX form factor is standardized at 6.7×6.7 inches6.7 \times 6.7 \text{ inches} (17×17 cm17 \times 17 \text{ cm}). It is specifically designed for small-form-factor cases, offering two RAM slots (supporting dual-channel configurations) and exactly one PCIe expansion slot, which fits the client's requirement for a dedicated graphics card.

Adım Adım Çözüm

1
Identify the dimensional requirements from the scenario stem.
The target enclosure requires a motherboard measuring 6.7 in×6.7 in6.7\text{ in} \times 6.7\text{ in} (17 cm×17 cm17\text{ cm} \times 17\text{ cm}).
Matching physical dimensions ensures the motherboard aligns with case mounting standoffs and I/O shield cutouts.
2
Evaluate standard desktop motherboard form factor specifications against the required footprint.
Mini-ITX is defined specifically as 6.7 in×6.7 in6.7\text{ in} \times 6.7\text{ in} (17 cm×17 cm17\text{ cm} \times 17\text{ cm}), featuring 2 memory slots and 1 PCIe expansion slot.
Micro-ATX (9.6 in×9.6 in9.6\text{ in} \times 9.6\text{ in}) and Standard ATX (12 in×9.6 in12\text{ in} \times 9.6\text{ in}) are too large, while Nano-ITX (4.7 in×4.7 in4.7\text{ in} \times 4.7\text{ in}) lacks full-sized desktop expansion slots.

Anahtar Kavram

Motherboard Form Factor Dimensions and Slot Capabilities
Tahmini Süre:1m 0s
Soru 199Soru →

A point-of-sale (POS) technician is troubleshooting a direct thermal receipt printer that produces receipts with faint, streaked text along one edge of the paper, while the other side prints crisp black text. The paper roll is verified to be fresh and installed in the correct orientation. Which of the following actions should the technician take first to resolve the print quality issue?

Cevabı ve açıklamayı göster

Cevap: Clean the thermal printhead heating elements using isopropyl alcohol and a lint-free swab.

Cevap

Clean the thermal printhead heating elements using isopropyl alcohol and a lint-free swab.
Direct thermal printers operate by pressing heat-sensitive paper against a thermal printhead containing tiny heating elements. Over time, paper dust and heat-activated chemicals accumulate on the printhead pins, insulating them and causing uneven or faint printing across portions of the page. Cleaning the printhead with isopropyl alcohol removes this residue and restores proper heat contact.

Adım Adım Çözüm

1
Identify the printer technology being used.
The printer is a direct thermal receipt printer, which applies heat directly to heat-sensitive paper without ink or toner.
Understanding the technology eliminates components associated with laser printers (fusers, corona wires) or thermal transfer printers (ink ribbons).
2
Diagnose the cause of faint text along one edge.
Buildup of paper dust, adhesive, or residue on specific heating elements along the printhead prevents proper heat transfer.
Direct thermal paper requires direct, clean contact with the heated pins/elements of the printhead to activate the chemical coating.
3
Determine the correct maintenance procedure.
Clean the printhead surface with high-purity isopropyl alcohol and a non-abrasive, lint-free swab or cleaning pen.
This is standard preventative maintenance to remove accumulated residue without damaging the delicate heating pins.

Anahtar Kavram

Direct Thermal Printer Maintenance
Tahmini Süre:1m 15s
Soru 200Soru →

A system technician is inventorying motherboard components and form factors for an upcoming workstation deployment. Match each motherboard form factor or internal connector on the left with its defining design specification or primary function on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Micro-ATX form factor
8-pin EPS12V connector
PCIe x1 expansion slot
20-pin USB 3.0 header

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Micro-ATX matches the 9.6 × 9.6 inch maximum form factor specification; 8-pin EPS12V matches dedicated +12V CPU power delivery; PCIe x1 matches the single serial lane for lower-bandwidth expansion cards; 20-pin USB 3.0 header matches the keyed connection for front-panel SuperSpeed ports.
Micro-ATX motherboards strictly adhere to the 9.6 × 9.6 inch dimensional standard with up to 4 expansion slots. The 8-pin EPS12V connector delivers dedicated +12V power to the processor's VRMs. The PCIe x1 slot provides a single serial lane ideal for basic expansion cards. The 20-pin internal header connects USB 3.0 front-panel ports.

Adım Adım Çözüm

1
Identify the physical dimensions and slot limitations of common motherboard form factors.
Micro-ATX is defined by maximum dimensions of 9.6 × 9.6 inches with a maximum of 4 expansion slots.
Differentiates Micro-ATX from standard ATX (12 × 9.6 inches) and Mini-ITX (6.7 × 6.7 inches).
2
Analyze the primary role of the 8-pin EPS12V power connector.
It supplies supplementary +12V power directly to the CPU power phase components.
Main 24-pin ATX power supplies overall motherboard logic, whereas EPS12V specifically feeds CPU voltage regulators.
3
Determine throughput capabilities of PCIe slot configurations.
A PCIe x1 slot contains 1 communication lane for lower bandwidth devices like Wi-Fi or sound cards.
PCIe lanes scale from x1 up to x16 depending on bandwidth demands.
4
Match internal motherboard headers with front-panel connector types.
The 20-pin (19-pin active) keyed header connects front-panel USB 3.0 / USB 3.2 Gen 1 ports.
Distinguishes 5Gbps USB 3.0 headers from 9-pin USB 2.0 headers and front-panel audio headers.

Anahtar Kavram

Motherboard Form Factors, Power Connectors, Expansion Slots, and Internal Headers
Tahmini Süre:1m 30s
ÖncekiSayfa 10 / 23Sonraki
Hardware Alıştırma Soruları — CompTIA A+ (Core 1 & Core 2) — Sayfa 10 | Examkin