Examkin

Soru

Zorluk: OrtaUtilizing Hardware Testers and Packet Analyzers

Match each network diagnostic requirement or scenario to the most appropriate hardware testing tool or protocol analyzer function.

  • Locating the precise distance to a bend or reflective break along a 1.5 km single-mode optical fiber link.Optical Time-Domain Reflectometer (OTDR)
  • Identifying which unlabelled RJ-45 wall jack in an office area corresponds to a specific port on a 110 punch-down block.Tone generator and inductive probe kit
  • Verifying pin-to-pin wiring continuity, opens, shorts, and swapped wires on a newly terminated Cat 6 patch cable.Wiremap tester
  • Filtering captured frame traffic to isolate TCP window size changes and packet retransmission events during file transfer degradation.Packet analyzer display filter (`tcp.analysis.flags`)

Cevap

1. Distance fault on optical fiber links to Optical Time-Domain Reflectometer (OTDR). 2. Tracing unlabelled wall jack runs to Tone generator and inductive probe kit. 3. Checking pin continuity and wire pairing to Wiremap tester. 4. Filtering TCP window size and retransmissions to Packet analyzer display filter (`tcp.analysis.flags`).
Each diagnostic scenario maps directly to its intended hardware tool or packet analyzer syntax based on operational layer and physical medium: OTDR for fiber reflection faults, tone probe for cable tracing, wiremap tester for twisted-pair pinouts, and packet display filters for transport-layer performance analysis.

Adım Adım Çözüm

1
Analyze physical medium characteristics and required measurements for cable testing.
Fiber optic distance-to-fault detection requires optical pulse reflection measurement (OTDR). Unlabelled copper path tracing requires signal injection and pickup (tone generator and probe). Copper pinout verification requires pin-to-pin continuity testing (wiremap tester).
Matching physical medium symptoms to appropriate hardware tester operating principles ensures proper tool selection.
2
Evaluate protocol analysis requirements for packet capture inspection.
Transport layer issue inspection (TCP retransmissions and window size tracking) requires frame-level packet capture filtering syntax.
Packet analyzers evaluate frame contents across OSI Layers 2 through 7 using display filters to isolate specific network phenomena.

Anahtar Kavram

Selecting Appropriate Network Diagnostics Tools and Packet Analyzer Syntax
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Utilizing Hardware Testers and Packet Analyzers

Bu konudan daha fazla soru