Examkin

Soru

Zorluk: OrtaTroubleshooting Physical Cabling and Connectors

During a fiber optic cabling deployment between two network racks, a technician notes high optical signal attenuation on a multi-mode fiber patch cord. The technician suspects a physical micro-fracture or excessive bend radius near one of the connector terminations where light is escaping through the buffer. Which tool should the technician use to visually locate the exact spot where light is leaking?

  1. Visual Fault Locator (VFL)Cevap
  2. B
    Optical Power Meter (OPM)
  3. C
    Tone generator and probe
  4. D
    Time-Domain Reflectometer (TDR)

Cevap

The Visual Fault Locator (VFL) is the appropriate diagnostic tool to visually identify escaping light at a bend or fracture in a fiber optic cable.
The Visual Fault Locator (VFL) uses a visible red laser that bleeds through jacket damage, tight bends, or cracked fibers, enabling instant visual detection of physical fault locations.

Adım Adım Çözüm

1
Analyze the physical layer symptom
Light loss (attenuation) is occurring on a fiber patch cord due to a suspect bend or fracture emitting light.
Identifying whether light is escaping requires a visible light source operating in the visible spectrum.
2
Evaluate candidate optical troubleshooting tools
The Visual Fault Locator (VFL) injects a visible red laser (635-650 nm) into the fiber core.
Escaping red light illuminates faults through the jacket or connector buffer.
3
Select the correct diagnostic instrument
Choose the VFL over copper tools or non-visual meters.
OPMs measure loss quantitatively without pinpointing location, while TDRs and tone probes apply to copper media.

Anahtar Kavram

Fiber Optic Visual Fault Locators
Tahmini Süre:1m 0s
Bu soruyu puanla

Konular

Troubleshooting Physical Cabling and Connectors

Bu konudan daha fazla soru