Examkin

Soru

Zorluk: OrtaUtilizing Hardware Testers and Packet Analyzers

A network administrator is investigating severe transmission errors and dropped frames on a newly installed Category 6 UTP cable connecting a core switch to a critical server. The administrator must verify whether the copper cable installation meets official TIA/EIA structural performance standards, including measuring Near-End Crosstalk (NEXT), return loss, and attenuation under high-frequency signal loads. Which diagnostic tool should the administrator use to perform this compliance verification?

  1. A cable certifierCevap
  2. B
    A basic cable continuity tester
  3. C
    A tone generator and probe kit
  4. D
    A network packet analyzer

Cevap

A cable certifier is the correct tool because it tests high-frequency parameters such as Near-End Crosstalk (NEXT) and attenuation to verify compliance with TIA/EIA standards.
A cable certifier is specifically built to test physical cabling against official TIA/EIA performance specifications. It measures advanced physical parameters including Near-End Crosstalk (NEXT), Far-End Crosstalk (FEXT), insertion loss, and return loss at operating frequencies, confirming whether a cable run is certified for high-speed Ethernet operation.

Adım Adım Çözüm

1
Identify the troubleshooting layer and requirement.
The requirement is at Layer 1 (Physical) to verify Category 6 electrical performance and TIA/EIA certification standards under active load.
Signal degradation issues such as Near-End Crosstalk (NEXT) and return loss require physical layer testing tools capable of sending high-frequency test signals across conductors.
2
Evaluate the capabilities of various physical layer testing tools.
Basic continuity testers check pin mapping only; toner probes locate cables; packet analyzers inspect Layer 2–7 protocol frames. Only a cable certifier measures NEXT, return loss, attenuation, and frequency limits required for formal compliance.
Cable certifiers are specifically engineered to validate that installed cabling meets specified category standards.

Anahtar Kavram

Cable Certification and Hardware Diagnostic Tools
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Utilizing Hardware Testers and Packet Analyzers

Bu konudan daha fazla soru