Examkin

Soru

Zorluk: OrtaTroubleshooting Physical Cabling and Connectors

A network administrator connects a single-mode fiber optic patch cable to a newly installed patch panel module. Although physical link connectivity is established, optical testing shows exceptionally high optical return loss (back reflection), degrading signal quality. Upon visual inspection of the patch panel ports and connectors, the administrator notes that the patch cable has green LC connectors while the patch panel bulkhead coupler accepts blue LC connectors. Which of the following physical layer mismatched connection types is causing this issue?

  1. Mating an Angled Physical Contact (APC) connector with an Ultra Physical Contact (UPC) connectorCevap
  2. B
    Plugging a single-mode fiber patch cable into a multimode fiber optical transceiver module
  3. C
    Using a straight-through T568A patch cable instead of a T568B crossover patch cable
  4. D
    Connecting a standard copper RJ-45 connector to an SFP+ optical transceiver port

Cevap

Mating an Angled Physical Contact (APC) connector with an Ultra Physical Contact (UPC) connector is causing the high optical return loss.
In fiber optic infrastructure, green connectors indicate Angled Physical Contact (APC), which features an 8-degree angled ferrule end-face designed to minimize back reflection. Blue connectors indicate Ultra Physical Contact (UPC), which features a flat or slightly dome-shaped ferrule end-face. Connecting an APC ferrule to a UPC ferrule creates an air gap between the fiber cores, causing severe signal reflection (high optical return loss) and potential physical damage to the glass end-faces.

Adım Adım Çözüm

1
Identify the connector color coding standards for optical fiber polish types.
Green bodies/boots signify Angled Physical Contact (APC), while blue bodies/boots signify Ultra Physical Contact (UPC).
Industry standards mandate strict color coding to prevent improper mating of differing physical contact geometries.
2
Analyze the physical ferrule interface differences between APC and UPC connectors.
APC ferrules are polished at an 8-degree angle to direct reflected light into the cladding, whereas UPC ferrules are polished with a flat/spherical surface.
Joining an 8-degree angled ferrule (green) to a flat/spherical ferrule (blue) prevents complete glass-to-glass contact.
3
Determine the impact of mating APC with UPC connectors.
The physical gap causes severe optical signal reflection (high return loss) and can permanently damage the fiber end-faces.
Matching physical polish types is essential for maintaining physical layer transmission integrity.

Anahtar Kavram

Fiber Optic Polish Types (APC vs. UPC Connector Mismatch)
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Troubleshooting Physical Cabling and Connectors

Bu konudan daha fazla soru