Examkin

Soru

Zorluk: OrtaWireless Network Deployment and Standards

A network administrator is designing an enterprise wireless network to mitigate co-channel interference, satisfy regulatory spectrum requirements, and optimize airtime efficiency in high-density environments. Match each wireless deployment mechanism on the left with its primary function or operational requirement on the right.

  • Dynamic Frequency Selection (DFS)Monitors 5 GHz channels for radar transmissions and automatically changes the AP operating channel when radar signals are detected.
  • BSS ColoringAdds a numerical identifier to wireless frames, allowing access points on the same channel to differentiate overlapping BSS signals and reduce channel contention waits.
  • Orthogonal Frequency Division Multiple Access (OFDMA)Subdivides a wireless channel into smaller Resource Units (RUs) to allow simultaneous transmissions to multiple clients within a single time slot.
  • Transmit Power Control (TPC)Dynamically adjusts AP output wattage to maintain intended cell boundaries and reduce co-channel interference with adjacent access points.

Cevap

Dynamic Frequency Selection (DFS) matches with monitoring 5 GHz channels for radar signals; BSS Coloring matches with adding numerical identifiers to frames to differentiate overlapping service sets; OFDMA matches with subdividing channels into Resource Units for simultaneous transmissions; and Transmit Power Control (TPC) matches with adjusting access point output wattage to prevent co-channel interference.
Dynamic Frequency Selection (DFS) is designed specifically for radar detection and channel switching in the 5 GHz band. BSS Coloring marks frame headers with identifiers to mitigate co-channel contention in high-density deployments. OFDMA splits frequency channels into sub-channels (Resource Units) for parallel client transmissions. Transmit Power Control (TPC) regulates AP output power to shrink or expand cell boundaries, mitigating signal overlap.

Adım Adım Çözüm

1
Analyze regulatory frequency control mechanisms.
Identify that Dynamic Frequency Selection (DFS) is mandatory on specific 5 GHz channels to prevent interference with radar systems.
DFS continuously monitors for radar pulses and shifts the access point to an alternative channel if radar activity is detected.
2
Analyze high-density spatial reuse technologies introduced in Wi-Fi 6.
Connect BSS Coloring to adding spatial tags/colors to frame headers.
BSS Coloring allows access points operating on identical frequencies to recognize frames from neighboring networks as foreign, allowing them to adjust carrier sense thresholds and transmit without waiting unnecessarily.
3
Examine multi-user channel access methods.
Match OFDMA to sub-channel division into Resource Units (RUs).
OFDMA enables multi-user communication by allocating discrete subcarriers within a channel to different client devices simultaneously.
4
Evaluate cell sizing and power management techniques.
Link Transmit Power Control (TPC) to access point power output adjustments.
TPC regulates radio transmission power to keep coverage cells tightly bounded, avoiding signal bleed into adjacent access point cells operating on the same channel.

Anahtar Kavram

Enterprise Wireless Deployment Mechanisms and Channel Management Techniques
Bu soruyu puanla

Konular

Wireless Network Deployment and Standards

Bu konudan daha fazla soru