Examkin

Soru

Zorluk: KolayTurning Procedures and Signaling

A driver preparing to make a right turn at an upcoming street corner must perform several safety steps in order. Arrange the following steps in the correct chronological sequence from first to last.

  1. 1Check rear-view and side mirrors and look over your right shoulder for bicyclists, motorcyclists, or pedestrians.
  2. 2Activate your right turn signal at least 100 feet before reaching the intersection.
  3. 3Smoothly move your vehicle into the rightmost travel lane or close to the right edge/curb of the roadway.
  4. 4Slow down to a safe turning speed and yield the right-of-way to any pedestrians in the crosswalk.
  5. 5Complete the turn into the lane closest to the right-hand curb of the intersecting road.

Cevap

The proper sequence for executing a right turn begins with checking mirrors and blind spots, signaling continuous intent at least 100 feet in advance, moving into the rightmost lane position, slowing down to yield right-of-way to pedestrians, and completing the turn into the rightmost destination lane.
Safe driving principles require establishing situational awareness first (mirror and shoulder check), communicating intentions early (turn signal at 100 feet), securing proper road placement (moving close to the right curb), slowing down to yield right-of-way to crosswalk pedestrians, and completing the turn smoothly into the nearest available right-hand lane.

Adım Adım Çözüm

1
Scan mirrors and check the right blind spot
Identifies any vulnerable road users alongside the vehicle before changing position.
Observational checks must always precede vehicle maneuvers to prevent turning directly into the path of bicycles or pedestrians.
2
Activate the right turn signal at least 100 feet prior to the turn
Gives trailing and oncoming drivers sufficient notice of the intent to turn.
Standard traffic laws require continuous signaling for at least 100 feet prior to executing a turn.
3
Guide the vehicle toward the right edge or rightmost turn lane
Positions the car correctly for the maneuver without swinging wide.
Right turns must be initiated from as close to the right curb or roadway edge as practicable.
4
Reduce speed and yield to pedestrians
Ensures vehicle control and complies with crosswalk right-of-way regulations.
Pedestrians lawfully crossing have the right-of-way and speed must be reduced before initiating the turn.
5
Execute and complete the turn into the rightmost lane
Finishes the turn safely without encroaching on adjacent traffic lanes.
Driver turning rules require finishing a right turn in the lane nearest the right-hand curb.

Anahtar Kavram

Standard Right-Turn Procedural Sequence
Bu soruyu puanla

Konular

Turning Procedures and Signaling

Bu konudan daha fazla soru