Examkin

Soru

Zorluk: OrtaBrake Failure Management

You are driving down a slight decline toward a busy intersection when your service brake pedal sinks completely to the floorboard and fails to slow the vehicle. Pumping the pedal several times yields no braking pressure. Which of the following actions is the correct procedure to bring the vehicle to a safe stop?

  1. Downshift to a lower gear to use engine braking, then gradually apply the parking brake while holding the brake release button or lever.Cevap
  2. B
    Turn the ignition switch completely off and remove the key to shut down the engine immediately.
  3. C
    Yank the parking brake lever quickly up to its maximum point to lock the rear wheels as fast as possible.
  4. D
    Shift the transmission into neutral and maintain posted speed limits until an uphill off-ramp or flat area appears.

Cevap

Downshift to a lower gear to use engine braking, then gradually apply the parking brake while holding the brake release button or lever.
When primary hydraulic service brakes fail completely, downshifting reduces speed through engine resistance. Following this with a steady, progressive application of the parking brake allows mechanical deceleration while retaining full steering ability.

Adım Adım Çözüm

1
Identify loss of hydraulic brake pressure
Recognize that service pedal pumping has failed to rebuild pressure.
Continuing to press a unresponsive pedal wastes critical reaction time.
2
Engage engine braking
Shift the vehicle into a lower gear (or manual gear range).
Transmission gearing reduces wheel rotation rate via engine resistance.
3
Apply emergency parking brake progressively
Slowly engage the parking brake while maintaining control of the vehicle's direction.
Gradual friction slows the rear wheels without causing them to lock up and skid.

Anahtar Kavram

Brake Failure Control and Emergency Deceleration
Bu soruyu puanla

Konular

Brake Failure Management

Bu konudan daha fazla soru