Tüm alıştırma soruları

2524 soru

Soru 2141Soru

When two vehicles reach an uncontrolled intersection at the exact same time from opposite directions, the driver making a left turn has the right-of-way over the driver proceeding straight.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. The vehicle traveling straight has the right-of-way, and the driver turning left must yield until it is safe to turn.
The statement is false because traffic rules require drivers turning left across oncoming lanes of traffic to yield the right-of-way to oncoming vehicles proceeding straight or turning right.

Adım Adım Çözüm

1
Analyze the scenario and vehicle positions.
Two vehicles arrive simultaneously at an uncontrolled intersection from opposite directions—one going straight and one turning left.
Right-of-way determination depends on the intersection type, timing, and vehicle trajectories.
2
Apply right-of-way rules for opposing traffic streams.
Drivers turning left across oncoming traffic must yield to vehicles moving straight ahead.
Cutting across an oncoming traffic path creates high collision risk, placing the responsibility to yield on the turning vehicle.
3
Evaluate the statement.
The statement incorrectly claims the turning vehicle has precedence, making the assertion false.
The driver moving straight holds right-of-way priority over left-turning vehicles arriving at the same time.

Anahtar Kavram

Right-of-Way for Left-Turning Vehicles
Soru 2142Soru

You are driving on a city street and approach a mid-block crosswalk controlled by a Pedestrian Hybrid Beacon. The light signal transitions to a flashing red light while a pedestrian is crossing. What is your legal obligation as a driver?

Cevabı ve açıklamayı göster

Cevap: Come to a complete stop, yield to any pedestrian in the crosswalk, and proceed only when it is safe and clear.

Cevap

Come to a complete stop, yield to any pedestrian in the crosswalk, and proceed only when it is safe and clear.
At a Pedestrian Hybrid Beacon displaying a flashing red signal, drivers are legally required to stop completely. After stopping and yielding the right-of-way to any pedestrians in or entering the crosswalk, drivers may proceed cautiously once the crosswalk is clear.

Adım Adım Çözüm

1
Identify the traffic signal control type and current phase
The light is a flashing red signal at a Pedestrian Hybrid Beacon.
Different beacon phases prescribe specific driver duties.
2
Apply the statutory rule for a flashing red Pedestrian Hybrid Beacon
Drivers must bring their vehicle to a complete stop at the stop line or crosswalk line.
A flashing red light mandates a stop, equivalent to a stop-sign requirement.
3
Yield right-of-way and verify the crosswalk is clear before proceeding
After stopping and ensuring all pedestrians have safely cleared the roadway, the driver may proceed.
The driver may legally proceed during flashing red once the roadway is clear without waiting for the signal to turn off entirely.

Anahtar Kavram

Pedestrian Hybrid Beacon Flashing Red Rules
Tahmini Süre:45s
Soru 2143Soru

You are driving on a multi-lane roadway equipped with a Pedestrian Hybrid Beacon (HAWK signal). As you approach, the signal transitions from a solid red light to alternating flashing red lights. A pedestrian who was crossing has fully stepped onto the far side of a raised center divider island, leaving your side of the roadway completely clear. Which of the following describes your legal obligation before proceeding?

Cevabı ve açıklamayı göster

Cevap: Come to a complete stop at the stop line, check that your side of the roadway is clear of pedestrians, and proceed with caution while the signal continues to flash red.

Cevap

Drivers must bring their vehicle to a complete stop at the stop line during the alternating flashing red phase of a Pedestrian Hybrid Beacon. After stopping and ensuring that no pedestrians are in or entering their side of the roadway, drivers may proceed with caution while the signal continues to flash red.
Under statutory traffic rules governing Pedestrian Hybrid Beacons, the solid red phase mandates a complete stop and hold. However, when the beacon transitions to alternating flashing red lights, drivers must stop at the stop line, yield the right-of-way to any pedestrians in or approaching their side of the street, and may then proceed with caution if the roadway is clear.

Adım Adım Çözüm

1
Identify the meaning of the signal phase.
The alternating flashing red lights indicate a stop-and-proceed requirement similar to an emergency vehicle signal or a stop sign.
Traffic laws dictate that a solid red Pedestrian Hybrid Beacon requires a stop and hold, whereas a flashing red beacon permits proceeding after stopping if safe.
2
Determine the required vehicle action at the stop line.
The driver must bring the vehicle to a full and complete stop before the marked crosswalk or stop line.
A flashing red indication mandates a full stop prior to entering the intersection or pedestrian crossing zone.
3
Assess pedestrian right-of-way conditions.
Verify that no pedestrians remain on the driver's side of the roadway or in conflict with the vehicle's path.
Pedestrians have right-of-way in marked crosswalks; once clear of the travel lanes on the driver's side, safe movement can resume.

Anahtar Kavram

Pedestrian Hybrid Beacon (HAWK Signal) Rules during Flashing Red Phase
Soru 2144Soru

You are driving on a multi-lane roadway where the posted speed limit is 55 mph55\text{ mph}. As traffic becomes heavily congested and slows down, which of the following actions is required under the Basic Speed Law?

Cevabı ve açıklamayı göster

Cevap: Reduce your speed below the posted limit to match safe traffic conditions and maintain a proper following distance.

Cevap

Reduce your speed below the posted limit to match safe traffic conditions and maintain a proper following distance.
Under the Basic Speed Law, drivers must never operate a vehicle at a speed greater than is reasonable or prudent given traffic, weather, and road conditions. When traffic becomes congested, reducing speed below the posted limit is legally required to maintain safe vehicle control and following distance.

Adım Adım Çözüm

1
Analyze current road and traffic conditions.
Heavy congestion requires a lower speed than the maximum posted speed limit for safety.
The Basic Speed Law requires drivers to adjust speed based on weather, visibility, and traffic congestion.
2
Select the required safe driving practice.
Slow down to a safe speed and maintain a proper following distance.
This prevents rear-end collisions and ensures compliance with traffic safety rules.

Anahtar Kavram

Basic Speed Law and Safe Following Distance
Soru 2145Soru

When a freeway entrance ramp is controlled by an active ramp metering signal, a driver must bring their vehicle to a complete stop at the marked limit line on a red light, even if the main freeway travel lanes are completely clear of traffic.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

The statement is True. Drivers are legally required to come to a complete stop at a red ramp metering signal regardless of traffic density on the main freeway lanes.
The statement is true because ramp metering signals are statutory traffic control devices. A red light requires a complete stop at the limit line before proceeding, even when no vehicles are visible in the main travel lanes.

Adım Adım Çözüm

1
Identify the legal authority of ramp metering signals on freeway entrance ramps.
Ramp meters are legally binding traffic control signals.
Traffic control signals installed on public roadways carry full statutory authority under motor vehicle laws.
2
Evaluate driver obligations when encountering a red signal on a metered ramp under light traffic conditions.
A red signal mandates a complete stop at the stop line before proceeding.
Ramp metering signals control vehicle entry timing to prevent flow breakdown, and light traffic volume does not exempt a driver from stopping at a red light.

Anahtar Kavram

Freeway Ramp Metering Signal Compliance
Soru 2146Soru

On a multi-lane expressway, when an entrance ramp features a solid white line separating the acceleration lane from the adjacent freeway travel lane, drivers entering the expressway are legally permitted to cross the solid white line to merge as long as they have matched the speed of freeway traffic.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Drivers entering an expressway must remain within the acceleration lane until the solid white line transitions to a broken white line before executing a merge, regardless of whether they have matched freeway speed.
The statement is false. Solid white lines separating an acceleration lane from main freeway lanes designate areas where lane changing is restricted to maintain traffic safety and prevent premature merges. A driver must continue driving within the acceleration lane until the line turns into a broken white line before initiating a merge onto the expressway.

Adım Adım Çözüm

1
Identify the meaning of solid white pavement lines on freeway entrance ramps.
Recognize that a solid white line separates travel lanes to restrict lane changing and guide vehicles safely through designated entrance pathways.
Pavement markings specify legal and safe locations for lateral vehicle movements.
2
Evaluate the relationship between speed matching and lane marking regulations.
Understand that matching freeway traffic speed is a requirement for safe merging, but it does not legalise crossing a solid line.
Speed matching and proper positioning behind legal lane transition points are independent driving rules.
3
Determine the proper merging procedure.
The driver must maintain their lane position until reaching the section marked with broken white lines.
Merging at broken white lines ensures predictable traffic patterns and avoids high-risk merge zones.

Anahtar Kavram

Freeway Acceleration Lane Markings and Merging Regulations
Tahmini Süre:1m 30s
Soru 2147Soru

A driver approaches an intersection with a solid circular green signal and intends to turn left. Oncoming vehicles are traveling straight through the intersection from the opposite direction. What is the correct procedure for completing this turn?

Cevabı ve açıklamayı göster

Cevap: Yield the right-of-way to oncoming traffic and pedestrians, completing the turn only when a safe gap exists.

Cevap

Yield the right-of-way to oncoming traffic and pedestrians, completing the turn only when a safe gap exists.
When facing a solid green light without a green turn arrow, left turns are unprotected. Drivers must enter the intersection cautiously, signal continuously, and yield to all oncoming vehicles and pedestrians until it is clear and safe to turn.

Adım Adım Çözüm

1
Identify the signal type and intended maneuver
The driver has a solid green circular light (unprotected turn phase) and wants to turn left.
Solid green lights permit turns, but do not provide a protected left-turn arrow.
2
Apply right-of-way rules for left turns
Vehicles moving straight through from the opposite direction have the right-of-way.
Traffic laws mandate that left-turning vehicles must yield to oncoming traffic.
3
Execute the turn safely
Wait until oncoming lanes and crosswalks are clear before proceeding.
Ensures intersection safety without forcing oncoming vehicles to brake abruptly.

Anahtar Kavram

Unprotected Left Turn Right-of-Way
Tahmini Süre:45s
Soru 2148Soru

You are approaching an intersection controlled by a Yield sign, while a vehicle on the intersecting roadway approaches without any control signs. Which of the following actions must you take under official right-of-way rules?

Cevabı ve açıklamayı göster

Cevap: Slow down and give the right-of-way to traffic on the intersecting road, stopping if necessary to let them pass safely.

Cevap

Slow down and give the right-of-way to traffic on the intersecting road, stopping if necessary to let them pass safely.
A Yield sign legally obligates a driver to reduce speed and grant right-of-way to all vehicles approaching on the intersecting road, bringing the vehicle to a full stop only if necessary to avoid impeding or endangering cross traffic.

Adım Adım Çözüm

1
Identify the traffic control device governing your lane.
Your lane is controlled by a regulatory Yield sign.
Regulatory signs dictate mandatory right-of-way behavior.
2
Evaluate cross-traffic conditions.
A vehicle is approaching on the cross road without any control signs.
Uncontrolled traffic on the main roadway has precedence over traffic facing a Yield sign.
3
Execute the required yield procedure.
Slow down, prepare to stop if necessary, and yield right-of-way until the intersection is clear.
A Yield sign requires yielding priority to any vehicle that constitutes an immediate hazard.

Anahtar Kavram

Yield Sign Right-of-Way Priority
Tahmini Süre:45s
Soru 2149Soru

When completing a left turn from a multi-lane one-way street onto a multi-lane two-way street, a driver is legally permitted to steer directly into any lane of the receiving street, provided that the destination lane is clear of traffic.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is False. When turning left from a multi-lane one-way street onto a multi-lane two-way street, the driver must complete the turn into the left-most available lane proceeding in that direction of travel, unless designated otherwise by lane markings or traffic control signs.
The statement is false because standard traffic laws require a vehicle turning left from a multi-lane one-way street onto a multi-lane two-way street to turn into the left-most lane available for traffic moving in that direction. Drivers may not turn directly into outer or right-hand lanes unless pavement markings or signs explicitly authorize it.

Adım Adım Çözüm

1
Identify the initial turn positioning requirement.
The turn must be initiated from the left-most lane of the one-way street.
Proper turn entry requires positioning the vehicle in the lane closest to the left curb or edge.
2
Determine the mandatory receiving lane on the destination roadway.
The turn must be completed in the left-most lane available for traffic traveling in that direction.
Traffic safety codes strictly require turning into the nearest legal lane to prevent side-swipe conflicts and maintain predictable traffic streams.
3
Evaluate secondary lane movement rules.
Moving into adjacent right-hand lanes is only permissible as a separate maneuver after establishing position in the initial turn lane and giving a proper signal.
Sweeping across multiple lanes during a turning maneuver is considered an illegal wide turn.

Anahtar Kavram

Lane positioning rules when turning left from a multi-lane one-way street onto a multi-lane two-way street
Tahmini Süre:1m 15s
Soru 2150Soru

While driving along a busy commercial boulevard with a posted speed limit of 35 mph35\text{ mph}, a sudden heavy downpour creates standing water and severely limits visibility. Traffic begins slowing down, but a motorist continues driving at 35 mph35\text{ mph}, maintaining that operating at the posted limit is always legal. Which statement accurately describes the legality of this driver's speed?

Cevabı ve açıklamayı göster

Cevap: The driver is violating the Basic Speed Law because driving at the posted speed limit is illegal when weather or road conditions make that speed unsafe.

Cevap

The driver is violating the Basic Speed Law because driving at the posted speed limit is illegal when weather or road conditions make that speed unsafe.
The Basic Speed Law states that a driver must never operate a vehicle at a speed faster than is safe for existing conditions. Regardless of posted speed limit signs, adverse weather such as torrential rain and standing water demands reduced speed to maintain traction and safe stopping distances.

Adım Adım Çözüm

1
Identify the environmental conditions and driver actions in the scenario.
The driver maintains the maximum posted limit of 35 mph35\text{ mph} despite heavy rain, standing water, and reduced visibility.
Speed regulation analysis requires evaluating both posted limits and prevailing road hazards.
2
Apply the legal standard defined by the Basic Speed Law.
The Basic Speed Law mandates driving at a safe, reasonable speed for current conditions, regardless of posted maximum speed signs.
Posted speed limits apply under ideal conditions; driving at the posted limit on slippery, low-visibility roads creates hazards such as hydroplaning.

Anahtar Kavram

Basic Speed Law versus Posted Maximum Speed Limits
Tahmini Süre:1m 0s
Soru 2151Soru

You are driving a passenger vehicle at 50 mph50\text{ mph} on a wet two-lane highway where the posted speed limit is 50 mph50\text{ mph}. You are traveling behind a large commercial truck, and another vehicle is tailgating your car closely from behind. As visibility decreases due to rainfall, which combination of speed control and following distance adjustments represents the safest application of driving principles?

Cevabı ve açıklamayı göster

Cevap: Gradually reduce your speed below 50 mph50\text{ mph} and increase your following distance behind the commercial truck to at least 55 to 66 seconds, creating an adequate space cushion ahead.

Cevap

Gradually reduce your speed below 50 mph50\text{ mph} and increase your following distance behind the commercial truck to at least 55 to 66 seconds, creating an adequate space cushion ahead.
Under the Basic Speed Law, drivers must adjust speed according to road, weather, and traffic conditions. When driving on wet roads with reduced visibility, trailing a large truck, and being tailgated, reducing speed below the posted maximum and extending following distance to at least 5 to 6 seconds creates an essential safety buffer ahead, preventing the need for hard braking that could lead to a rear-end collision from behind.

Adım Adım Çözüm

1
Analyze environmental and traffic hazards present in the scenario.
Identified adverse weather (wet road/reduced visibility), a large vehicle ahead blocking vision, and a tailgating driver behind.
Multiple simultaneous risk factors require compounding defensive driving precautions.
2
Apply the Basic Speed Law to the posted speed limit of 50 mph50\text{ mph}.
Determine that driving at the posted limit of 50 mph50\text{ mph} is excessive for wet surface traction and low visibility.
The Basic Speed Law prohibits driving faster than is safe for existing conditions regardless of posted signs.
3
Calculate the necessary following distance behind the commercial truck.
Increase following distance from the standard 33 seconds to 55 or 66 seconds.
Additional space is needed due to wet pavement stopping distances and to absorb sudden stops smoothly for the tailgater behind.

Anahtar Kavram

Basic Speed Law and Extended Following Distance in Adverse Conditions
Soru 2152Soru

When driving on a roadway at night, red retroreflective pavement markers set into the lane lines indicate that your vehicle is traveling in the wrong direction against traffic flow.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True
Red retroreflective pavement markers are installed along lane lines to reflect red headlight beams back toward drivers who enter a lane, ramp, or roadway going in the wrong direction.

Adım Adım Çözüm

1
Analyze the color coding system used for retroreflective pavement markers (raised road studs).
Standard pavement markers use white to separate lanes traveling in the same direction and yellow for opposite direction boundaries, while red optical lenses face oncoming wrong-way traffic.
Traffic control standards assign specific visual meanings to pavement marker reflector colors.
2
Evaluate the meaning of seeing red retroreflectors on pavement lane markings.
If red reflected light faces your headlights from the pavement, your vehicle is moving against the legal direction of travel.
Red retroreflectors are unidirectional visual safety devices engineered exclusively to catch the headlights of wrong-way drivers.

Anahtar Kavram

Retroreflective Pavement Marker Color Coding and Wrong-Way Warnings
Tahmini Süre:45s
Soru 2153Soru

On a high-speed expressway, a High-Occupancy Vehicle (HOV) lane is separated from general traffic lanes by double solid white pavement lines. Under what condition may a driver legally cross these double solid white lines to enter or exit the HOV lane?

Cevabı ve açıklamayı göster

Cevap: Only at designated entry or exit gaps where pavement markings change to dashed lines or open breaks.

Cevap

Crossing double solid white lines separating an HOV lane is only permitted at designated entry and exit locations marked by dashed lines or broken pavement markings.
Double solid white lines define a fixed barrier between lanes traveling in the same direction. On expressways and freeways, drivers are legally restricted from crossing double solid white lines separating preferential HOV lanes and must wait for designated entry or exit areas marked by broken pavement lines.

Adım Adım Çözüm

1
Identify the meaning of double solid white line pavement markings on expressways.
Double solid white lines indicate a strict barrier where lane changes and crossing are prohibited.
Traffic laws use solid double white lines to separate special-use lanes (such as HOV or express lanes) from general traffic to maintain safety and flow.
2
Determine the lawful procedure for entering or exiting an HOV lane separated by double solid lines.
Drivers must continue in their lane until reaching marked designated areas where lines transition to dashed or broken patterns.
Designated access points ensure vehicles enter and leave high-occupancy lanes at designated speed transition zones.

Anahtar Kavram

HOV Lane Access and Double Solid White Line Restrictions
Soru 2154Soru

When completing a right turn onto a street with multiple lanes moving in the same direction, a driver must execute the turn so that the vehicle enters the lane closest to the right-hand curb or edge of the roadway.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. Drivers executing a right turn onto a multi-lane street must begin and complete the turn in the rightmost lane closest to the curb or road edge.
The statement is true because right turns must be completed in the lane closest to the right-hand edge or curb of the roadway to ensure safety and predictable traffic flow.

Adım Adım Çözüm

1
Identify the standard legal requirement for lane positioning during right turns on multi-lane roads.
Regulations state right turns must be initiated from the far-right lane and completed in the far-right lane.
This establishes predictable vehicle paths and prevents side-swipe conflicts with traffic in parallel or opposing lanes.
2
Evaluate the statement against established turning regulations.
The statement accurately reflects traffic law regarding proper turn completion positioning.
Completing a turn into the rightmost lane is mandatory unless road markings or sign signals explicitly direct otherwise.

Anahtar Kavram

Right Turn Lane Positioning
Tahmini Süre:45s
Soru 2155Soru

You are driving on a side street that terminates at an uncontrolled T-intersection without any stop signs, yield signs, or traffic signals. As you approach the intersection intending to turn onto the through street, another vehicle is approaching on the through street. Who must yield the right-of-way in this situation?

Cevabı ve açıklamayı göster

Cevap: The driver on the terminating side street must yield to traffic traveling on the through street.

Cevap

The driver traveling on the terminating side street must yield the right-of-way to traffic on the through street.
At an uncontrolled T-intersection, the road ends and joins a continuous through street. Under standard DMV traffic laws, drivers traveling on the terminating street must yield the right-of-way to vehicles traveling on the through street before entering or turning.

Adım Adım Çözüm

1
Identify the type of intersection described in the scenario.
The scenario describes an uncontrolled T-intersection (where one road ends by joining a continuous through road with no signs or signals).
Different right-of-way rules apply depending on whether an intersection is a standard four-way crossroad or a T-intersection.
2
Apply the statutory right-of-way rule for T-intersections.
Drivers on the terminating road (the stem of the 'T') must yield to all vehicles and pedestrians on the continuous through street.
Traffic flow on continuous through streets has legal priority over entering traffic when no control devices are present.

Anahtar Kavram

Uncontrolled T-Intersection Right-of-Way Rules
Soru 2156Soru

A motorist stops next to a street curb painted white to drop off a passenger before driving away. What rule governs stopping or parking in a zone marked with a white curb?

Cevabı ve açıklamayı göster

Cevap: Stopping is permitted only long enough to pick up or drop off passengers or mail.

Cevap

Stopping is permitted only long enough to pick up or drop off passengers or mail.
Under standard traffic regulations, a white painted curb indicates a restricted zone where drivers may stop only long enough to pick up or drop off passengers or deposit mail. Extended parking or leaving the vehicle unattended is prohibited.

Adım Adım Çözüm

1
Identify the standard statutory meaning of white painted curb markings.
White painted curbs indicate passenger loading/unloading zones or brief mail delivery stops.
Traffic control standards use distinct curb colors to regulate curb space efficiently.
2
Differentiate white curb rules from other painted curb designations.
White is restricted to brief passenger/mail stops, whereas yellow indicates freight loading, green indicates time-limited parking, and red prohibits stopping entirely.
Preventing extended parking in white zones keeps passenger loading areas accessible.

Anahtar Kavram

Curb Color Parking Restrictions
Tahmini Süre:1m 0s
Soru 2157Soru

A driver behind a slow-moving vehicle traveling at 45 mph decides to pass on a roadway with a posted maximum speed limit of 55 mph. Which legal requirement must the driver follow regarding speed during the overtaking maneuver?

Cevabı ve açıklamayı göster

Cevap: The driver must complete the entire passing maneuver without exceeding the posted 55 mph speed limit.

Cevap

The driver must complete the entire passing maneuver without exceeding the posted 55 mph speed limit.
Under standard traffic regulations, posted speed limits are absolute maximums. Drivers are not legally permitted to exceed the speed limit at any point while passing another vehicle.

Adım Adım Çözüm

1
Identify the statutory speed limit rules governing passing maneuvers.
The maximum posted speed limit is an absolute legal cap.
Traffic laws do not grant an automatic exemption to exceed posted speed limits while overtaking slower vehicles.
2
Evaluate the driver's options based on traffic conditions.
The pass must be aborted or delayed if it cannot be executed within the 55 mph limit.
A driver must ensure adequate distance and speed differential exist to pass legally and safely without speeding.

Anahtar Kavram

Maximum Speed Limit Adherence During Overtaking
Soru 2158Soru

Under ideal dry road conditions, defensive driving guidelines recommend maintaining at least a 33-second following distance behind a lead vehicle. However, while traveling on a highway with a posted speed limit of 65 mph65\text{ mph}, a driver encounters a sudden light rain that mixes with oil residue to make the asphalt slick, while simultaneously following directly behind a large commercial truck that obstructs the view ahead. Considering the combined effects of reduced traction and restricted forward visibility, what is the minimum following distance the driver should maintain?

Cevabı ve açıklamayı göster

Cevap: At least 66 seconds, expanding the time gap to compensate for both reduced stopping traction and restricted line-of-sight.

Cevap

The driver should establish a minimum following distance of at least 66 seconds to account for both slippery road conditions and obstructed forward visibility.
Under standard dry conditions, a 33-second following distance provides adequate reaction time. However, safe driving principles require compounding the distance when multiple hazards exist. Following a large commercial truck obstructs forward vision, adding 11 to 22 seconds to the required gap. Additionally, light rain mixing with road oil produces a slick surface that reduces tire traction and increases stopping distance, adding another 11 to 22 seconds. Combining these factors requires expanding the safety buffer to at least 66 seconds.

Adım Adım Çözüm

1
Identify the baseline following distance under ideal conditions.
The baseline safety gap on dry pavement for passenger vehicles is 33 to 44 seconds.
Establishes the foundation before adjusting for environmental and traffic hazards.
2
Account for the visibility hazard caused by the commercial truck.
Following a large vehicle restricts sightlines of hazards ahead, requiring an increase of at least 11 to 22 seconds to the gap (44 to 55 seconds total).
Extra space allows the driver to see around the truck and provides time to react if the truck stops suddenly.
3
Account for the surface condition hazard (light rain on oil residue).
Slick pavement significantly increases vehicle braking distances, requiring an additional 11 to 22 seconds of buffer space.
Reduced tire traction increases the physical distance required to bring the vehicle to a complete stop.
4
Combine the risk factors to calculate the total required following distance.
Adding the safety adjustments for both obstructed vision and reduced friction results in a minimum requirement of at least 66 seconds.
Multiple simultaneous hazards compound driving risk and necessitate cumulative safety buffers.

Anahtar Kavram

Cumulative Following Distance Adjustment for Multiple Hazards
Soru 2159Soru

You are approaching an active highway work zone where traffic flow is restricted to a single lane and controlled by a human flagger using a STOP/SLOW paddle. Arrange the following driver actions in the correct chronological order from first to last to safely navigate the controlled area.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence is: (1) Scan ahead and begin reducing speed well before the flagger; (2) Bring the vehicle to a complete stop while the STOP paddle is displayed; (3) Remain stopped until the flagger displays SLOW and signals to move; and (4) Drive cautiously through the single-lane work zone.
The correct order requires early speed reduction upon recognizing work zone advance warnings, stopping completely when the STOP paddle is presented, maintaining position until both the SLOW paddle and explicit hand signals are given, and finally proceeding through the work zone at a safe, reduced speed.

Adım Adım Çözüm

1
Identify work zone warnings and reduce speed early.
Vehicle approaches the flagger at a safe, controlled speed.
Allows adequate stopping distance and time to observe flagger instructions.
2
Stop completely before the flagger's position when STOP paddle is shown.
Vehicle comes to a full stop without encroaching on the work area.
Compliance with flagger authority prevents entering occupied or single-lane travel space.
3
Wait for positive signal (SLOW paddle and hand gesture).
Driver verifies the opposite direction is clear.
Flaggers alternate traffic flow; proceeding early risks head-on collision.
4
Proceed cautiously at posted work zone speed.
Vehicle safely navigates past workers and equipment.
Maintains work zone safety until clear of temporary restrictions.

Anahtar Kavram

Work Zone Flagger Traffic Control and Right-of-Way Compliance
Tahmini Süre:2m 0s
Soru 2160Soru

Three vehicles approach a four-way stop intersection at different times. Place the vehicles in the correct order in which they should proceed through the intersection, from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The vehicles should proceed in order of arrival: Vehicle A first, followed by Vehicle B, and finally Vehicle C.
At a four-way stop sign, right-of-way is established by arrival order. The driver who comes to a complete stop first is entitled to proceed first, followed by subsequent drivers in the order of their arrival.

Adım Adım Çözüm

1
Identify the primary right-of-way rule for four-way stop intersections.
Right-of-way at a four-way stop follows the first-in, first-out rule based on arrival time.
Traffic law dictates that drivers must yield to vehicles that have already stopped at the intersection prior to their arrival.
2
Determine the sequence based on arrival order.
Vehicle A stops first, Vehicle B stops second, and Vehicle C stops third.
Sequencing follows exact arrival order.

Anahtar Kavram

Four-Way Stop First-Come First-Served Rule
Tahmini Süre:45s
ÖncekiSayfa 108 / 127Sonraki
Tüm alıştırma soruları — DMV Permit Practice Test | Examkin