Examkin

Tüm alıştırma soruları

178 soru

Tüm türler2,524Çoktan seçmeli1,281Çoklu seçim4Doğru / Yanlış972Eşleştirme89Sıralama178
Soru 61Soru →

A motorist driving along a multi-lane urban roadway approaches an intersection where they intend to execute a left turn. Arrange the following driving maneuvers in the correct chronological order from first action to last action to perform this turn safely and legally.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The proper sequence for executing a left turn on a multi-lane street is: 1) Check mirrors and blind spots, 2) Signal continuously at least 100 feet in advance, 3) Move into the dedicated leftmost turn lane, 4) Yield right-of-way to oncoming traffic and crosswalk pedestrians, and 5) Complete the turn into the corresponding lane of the destination street.
The correct procedural sequence follows safe defensive driving standards: observing traffic via mirrors and shoulder checks must precede signaling intent. Early signaling (at least 100 feet ahead) establishes warning before entering the leftmost turning lane. Once in position at the intersection, right-of-way rules require yielding to oncoming traffic and pedestrians before finalizing the turn into the corresponding lane.

Adım Adım Çözüm

1
Perform visual checks
Driver gains situational awareness of nearby vehicles, motorbikes, and cyclists.
Checking blind spots first ensures safe room exists before signaling or shifting lateral lane position.
2
Activate directional indicator
Surrounding traffic is informed of intended turning maneuver.
DMV regulations mandate continuous signaling at least 100 feet prior to turning or changing lanes.
3
Position vehicle in leftmost turn lane
Vehicle enters the appropriate lane designated for left turns.
Left turns must originate from the extreme left lane available for traffic moving in that direction.
4
Assess intersection conflict points and yield
Vehicle stops or slows to allow oncoming traffic and pedestrians to clear.
Drivers turning left must yield right-of-way to approaching vehicles proceeding straight or turning right.
5
Execute and complete turning trajectory
Vehicle safely enters the correct destination lane.
Turning into the nearest corresponding lane prevents side-swipe collisions with parallel traffic.

Anahtar Kavram

Safe Left-Turn Execution Procedure and Lane Selection
Tahmini Süre:1m 30s
Soru 62Soru →

A driver traveling on a two-lane road decides to overtake a slower vehicle ahead. Place the initial preparation steps for initiating the pass in the correct sequential order from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence is: 1) Verify road markings and traffic ahead permit passing, 2) Check mirrors and blind spots for trailing traffic, 3) Activate the left turn signal, and 4) Steer into the passing lane while accelerating.
The correct order prioritizes scanning the roadway ahead for legal permission and oncoming traffic, followed by scanning behind and in blind spots, signaling intent to other road users, and finally executing the maneuver smoothly.

Adım Adım Çözüm

1
Assess the traffic situation and pavement markings ahead.
Confirms that passing is legal and that there is sufficient clear space in the oncoming lane.
Passing must never be initiated where prohibited or when oncoming vehicles present a hazard.
2
Check surrounding traffic using mirrors and blind spot checks.
Ensures no vehicle behind has already pulled out to pass.
Drivers must verify that space around their vehicle is unoccupied before signaling or moving.
3
Signal left turn intention.
Communicates the upcoming move to preceding and trailing traffic.
Turn signals are required prior to changing lanes or pulling out to pass.
4
Move into the left lane and accelerate.
Executes the overtaking maneuver safely.
Steering into the lane occurs only after safety checks and signaling are complete.

Anahtar Kavram

Sequential safety procedure for initiating a passing maneuver on a two-lane road
Tahmini Süre:45s
Soru 63Soru →

Three vehicles stop at a four-way stop intersection: Car A arrives and stops first. Car B and Car C arrive and stop simultaneously a few seconds later, with Car B positioned to the right of Car C. In what order should these vehicles proceed through the intersection?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The vehicles must proceed through the intersection in the following order: Car A first, followed by Car B, and finally Car C.
Car A arrived first, giving it immediate right-of-way priority to proceed first. Car B and Car C arrived simultaneously after Car A. Under standard right-of-way rules for simultaneous arrival at a stop sign, the driver on the left must yield to the driver on the right. Because Car B is to the right of Car C, Car B proceeds second, leaving Car C to proceed last.

Adım Adım Çözüm

1
Identify which vehicle established first priority by arrival time.
Car A arrived first and stopped before the other vehicles.
The standard rule at a multi-way stop is 'first to arrive, first to proceed.'
2
Determine right-of-way between Car B and Car C, who arrived at the exact same time.
Car B proceeds before Car C because Car B is positioned to the right of Car C.
When two vehicles arrive simultaneously at a stop sign, right-of-way is given to the vehicle on the right.
3
Combine the arrival order and right-hand priority to determine final sequence.
The correct order of movement is Car A, then Car B, then Car C.
Car A moves first based on arrival time, Car B moves second based on the right-hand rule, and Car C yields until Car B clears.

Anahtar Kavram

Four-Way Stop Precedence and Right-Hand Yield Rule
Soru 64Soru →

Traffic signals at a four-way intersection are dark due to a power outage, requiring all approaching drivers to treat the intersection as a four-way stop. Four road users approach the intersection under the conditions described below. In what order must right-of-way be yielded, from the first road user permitted to proceed to the last?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence from first to last is: (1) Active ambulance with sirens and lights, (2) Vehicle A (first standard arrival), (3) Vehicle B (simultaneous arrival, going straight), and (4) Vehicle C (simultaneous arrival, turning left).
The correct order follows established statutory traffic hierarchies: emergency vehicles with active sirens/flashing lights supersede standard controls (1st priority); among standard traffic at an all-way stop, the vehicle arriving first holds right-of-way (2nd priority); and when two opposing standard vehicles arrive simultaneously, straight-through traffic has right-of-way over left-turning traffic (3rd priority before 4th priority).

Adım Adım Çözüm

1
Identify top priority vehicle overriding standard stop-sign rules
The active emergency ambulance with siren and lights activated receives immediate right-of-way priority over all standard traffic.
State traffic laws mandate that drivers yield right-of-way to emergency vehicles operating lights and sirens regardless of normal intersection arrival order.
2
Apply first-arrival rule for standard vehicles at an all-way stop
Vehicle A proceeds second.
At an intersection operating as a four-way stop, the first vehicle to reach a complete stop at the stop line has the right-of-way to proceed first among standard traffic.
3
Resolve right-of-way between vehicles arriving simultaneously at opposite approaches
Vehicle B (proceeding straight) moves third, before Vehicle C (turning left).
When opposing vehicles arrive at an all-way stop at the exact same time, the vehicle turning left across oncoming lanes must yield to the oncoming vehicle proceeding straight.
4
Assign final position to the yielding turning vehicle
Vehicle C proceeds last.
Vehicle C must wait until the oncoming straight-through vehicle clears the intersection before executing its left turn.

Anahtar Kavram

Right-of-way priority rules at all-way stop intersections involving emergency vehicle override, arrival ordering, and left-turn yield requirements.
Tahmini Süre:2m 0s
Soru 65Soru →

A driver traveling on a multi-lane roadway intends to execute a safe lane change to the left. Arrange the steps of the proper lane-changing procedure in the correct sequential order from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence for changing lanes safely is: 1. Check rearview and side mirrors, 2. Turn on the left turn signal, 3. Look over the left shoulder to check the blind spot, 4. Smoothly steer into the left lane, and 5. Cancel the turn signal.
A safe lane change requires a precise observation-signal-verification-execution sequence: checking mirrors to observe traffic flow, signaling to inform other drivers of intent, checking the blind spot directly over the shoulder, steering smoothly into the target lane when clear, and turning off the signal once established.

Adım Adım Çözüm

1
Check rearview and side mirrors
Gains initial situational awareness of surrounding traffic.
Establishes whether traffic conditions allow for a safe lane change opportunity.
2
Activate the left turn signal
Communicates the intended path to nearby drivers.
Drivers must give clear early warning before initiating directional movement.
3
Check the left blind spot over the shoulder
Verifies that no hidden vehicle is present in the target lane.
Rearview and side mirrors leave blind spots that can only be checked by looking over the shoulder.
4
Steer into the target lane
Transitions the vehicle smoothly into the adjacent lane.
Execution should happen promptly and smoothly once the lane is verified clear.
5
Deactivate the turn signal
Completes the lane change maneuver.
Prevents confusion among trailing and oncoming traffic after position is established.

Anahtar Kavram

Sequential Procedure for Safe Lane Changes (Observation, Signaling, Blind Spot Check, Execution, Cancellation)
Soru 66Soru →

A motorist driving on a two-lane rural highway intends to overtake a slow-moving vehicle ahead. Arrange the following steps in the correct chronological sequence required to safely and legally execute the complete passing maneuver.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence is: (1) Check ahead for a dashed yellow line and ensure clear distance from oncoming traffic; (2) Activate the left turn signal and perform a shoulder check over the left shoulder; (3) Steer into the opposing lane and accelerate past the vehicle without exceeding the speed limit; (4) Signal right once both headlights of the passed vehicle are clearly visible in the interior rearview mirror; (5) Steer smoothly back into the right lane and cancel the turn signal.
Safe overtaking requires a strict sequence of actions: first evaluating traffic flow and road markings, next signaling and verifying blind spots, then moving into the opposing lane within legal speed boundaries, checking space via the interior mirror before signaling right, and finally steering back into position.

Adım Adım Çözüm

1
Assess environment and traffic control devices
Confirm passing is legally permitted by pavement markings (broken yellow line) and physically safe from oncoming vehicles.
Passing cannot begin without clear sight distance and legal authorization.
2
Signal and check blind spots
Warn other drivers and verify no vehicle behind has initiated a pass in your blind spot.
Mirrors alone do not cover blind spots, and signaling alerts surrounding traffic.
3
Execute overtake
Move into the left lane and complete the pass within posted speed limits.
Exceeding the speed limit while passing is illegal on public roadways.
4
Confirm safe separation distance
Observe both headlights of the passed vehicle in the interior rearview mirror, then signal right.
The interior mirror provides accurate depth perception to prevent cutting off the passed vehicle.
5
Return to lane
Re-enter the right lane smoothly and deactivate the signal.
Completes the passing maneuver safely.

Anahtar Kavram

Chronological procedure for overtaking safely on two-lane roads
Tahmini Süre:2m 0s
Soru 67Soru →

Four traffic participants arrive at a signalized intersection at the same time. Arrange the following participants in the correct order of right-of-way precedence, from FIRST to proceed (highest priority) to LAST to proceed (lowest priority).

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order of precedence from highest priority (first to proceed) to lowest priority (last to proceed) is: (1) Emergency vehicle with active siren and lights, (2) Pedestrian lawfully walking in the crosswalk, (3) Car traveling straight through on a solid green light, and (4) Car making an unprotected left turn on a solid green light.
Emergency vehicles with active sirens and lights always have ultimate right-of-way. Once clear, pedestrians lawfully crossing in marked crosswalks must be yielded to. Next, traffic traveling straight through an intersection on a solid green light has right-of-way over oncoming traffic making an unprotected left turn.

Adım Adım Çözüm

1
Identify emergency vehicle priority
Emergency vehicle with active siren and flashing lights takes highest priority.
Emergency response vehicles override standard traffic rules and signalization.
2
Evaluate pedestrian right-of-way
Pedestrian in the crosswalk proceeds second.
Pedestrians lawfully crossing have right-of-way over standard motor vehicle traffic once emergency vehicles pass.
3
Determine precedence between straight-through traffic and turning traffic on a green light
Straight-through vehicle proceeds third, followed by the left-turning vehicle fourth.
Traffic going straight has right-of-way over vehicles executing an unprotected left turn facing a solid green light.

Anahtar Kavram

Right-of-Way Hierarchy at Signalized Intersections
Tahmini Süre:45s
Soru 68Soru →

You are driving in the center travel lane of a multi-lane highway when an emergency vehicle with active sirens and flashing lights approaches rapidly from behind. Arrange the following driver actions in the correct chronological sequence required by law to safely yield the right-of-way.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequential order of actions is: 1) Check mirrors, check right blind spot, and activate right-turn signal; 2) Safely change lanes toward the far right lane or shoulder; 3) Bring vehicle to a complete stop parallel to the right edge; 4) Maintain position and remain stopped until all emergency vehicles have passed.
When an emergency vehicle with active lights and sirens approaches from behind on a multi-lane roadway, standard traffic codes dictate that a driver must first mirror-check, blind-spot check, and signal; second, transition safely to the far right lane or shoulder; third, bring the vehicle to a full stop parallel to the right edge; and fourth, remain stopped until all emergency response units have cleared.

Adım Adım Çözüm

1
Scan surrounding traffic and signal lane shift
Establishes intent to yield and verifies space in the adjacent right lane
Abruptly shifting lanes without signaling creates severe collision hazards for adjacent highway traffic.
2
Transition vehicle to the rightmost available space or shoulder
Vacates travel lanes to open a path for the emergency responder
Move Over and emergency yield statutes require traffic to clear lanes by moving to the right edge of the roadway.
3
Execute a full stop parallel to the road shoulder
Establishes a predictable, stationary position clear of traffic lanes
Emergency operators rely on stationary surrounding traffic to navigate through high-speed corridors safely.
4
Hold stationary position until all emergency vehicles clear the area
Prevents pulling back into active traffic lanes prematurely
Multiple emergency units often follow close behind one another during active dispatch responses.

Anahtar Kavram

Yielding Right-of-Way to Emergency Vehicles
Soru 69Soru →

A driver on a two-lane road has successfully overtaken a slow vehicle in the opposing traffic lane. What is the correct chronological sequence of steps the driver must take to safely return to the right lane?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence is: first, look into the inside rearview mirror until both headlights of the passed vehicle are visible; second, turn on the right-turn signal; third, perform a right blind-spot check over the shoulder; fourth, steer smoothly back into the right lane; and fifth, deactivate the turn signal.
Safe re-entry after passing requires first establishing clear distance by seeing the passed vehicle's headlights in the inside rearview mirror, signaling the maneuver, performing a right shoulder blind-spot check, steering smoothly into the right lane, and deactivating the signal once complete.

Adım Adım Çözüm

1
Check the center rearview mirror.
Wait until both headlights of the passed vehicle appear in the mirror.
Ensures sufficient clearance so the passed vehicle is not cut off.
2
Signal the lane return.
Engage the right-turn signal.
Communicates intention to merge back to the right.
3
Check the blind spot.
Look over the right shoulder.
Mirrors alone do not show vehicles positioning in the right blind spot.
4
Re-enter the right lane.
Guide the vehicle smoothly into the right lane.
Completes the passing maneuver safely without abrupt swerving.
5
Turn off the signal.
Cancel the right-turn signal.
Concludes the maneuver and clears signal indicator.

Anahtar Kavram

Safe Passing Re-Entry Sequence
Soru 70Soru →

Four vehicles approach a signalized intersection under the operational conditions described below. Arrange these vehicles in the correct order of right-of-way precedence, from the vehicle that has the highest priority to proceed first (position 1) to the vehicle that must yield to all others (position 4).

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order of right-of-way precedence from first to proceed to last is: (1) Emergency response vehicle with active sirens and lights, (2) Vehicle turning right on a solid green light, (3) Vehicle making an unprotected left turn on a solid green light, and (4) Vehicle executing a U-turn on a solid green light.
Emergency vehicles operating with active warning equipment take highest priority. Among standard vehicles facing a solid green light, right-turning vehicles proceed before unprotected left turns, while U-turning vehicles must yield to all oncoming traffic.

Adım Adım Çözüm

1
Identify top priority vehicle using emergency right-of-way rules
The emergency vehicle with active flashing lights and siren must be granted right-of-way first by all other traffic.
State DMV laws require all drivers to yield immediately to emergency vehicles operating active warning equipment.
2
Determine priority among remaining vehicles facing a solid green light
The vehicle turning right on solid green proceeds second.
Direct right turns on green have priority over left-turning and U-turning traffic competing for the same roadway.
3
Compare left-turning traffic with U-turning traffic
The vehicle making an unprotected left turn proceeds third.
While an unprotected left turn must yield to oncoming straight and right-turn traffic, it has right-of-way over U-turning vehicles originating from the opposite direction.
4
Identify the lowest priority vehicle
The vehicle executing a U-turn proceeds fourth (last).
DMV statutes explicitly require U-turning vehicles to yield to all other established traffic movements.

Anahtar Kavram

Right-of-Way Priority at Signalized Intersections
Tahmini Süre:2m 0s
Soru 71Soru →

While navigating a curved rural highway at speed, your vehicle's right tires drop off an uneven asphalt edge onto a low, unpaved shoulder. To safely recover from this pavement edge drop without losing control, in what exact sequence should you execute the following procedural actions?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct procedural sequence is: First, grip the steering wheel firmly and keep the vehicle straight; Second, ease off the accelerator to slow down gradually; Third, check mirrors and blind spots for a clear traffic gap; Fourth, execute a small quarter-turn toward the roadway; Fifth, counter-steer to center the vehicle in your lane as soon as the wheels climb the pavement edge.
Safely recovering from a pavement edge drop requires establishing directional control first (firm grip, straight path), shedding kinetic energy gradually (easing off gas), confirming traffic clearance, executing a controlled small-angle steer over the lip, and immediately counter-steering to avoid overshooting into opposing lanes.

Adım Adım Çözüm

1
Stabilize direction immediately upon wheel drop-off.
Prevents initial rollover risk or fishtailing along the shoulder edge.
Gripping the wheel firmly and riding out the drop-off maintains vehicle stability against uneven lip friction.
2
Reduce vehicle speed safely without sudden braking.
Lowers kinetic energy to make the lip-climbing maneuver manageable.
Hard braking on mixed-traction surfaces (asphalt vs. dirt/gravel) causes wheel lockup and loss of steering response.
3
Scan surrounding traffic conditions.
Ensures re-entering the lane will not create a crash hazard with adjacent vehicles.
Re-entering a roadway requires a safe gap in traffic before initiating any lateral movement.
4
Steer smoothly onto the pavement lip.
Allows the front right tire to roll up and over the raised asphalt edge cleanly.
A small angle of turn prevents tire scrubbing against the vertical edge lip.
5
Counter-steer to stabilize position in the lane.
Centers the vehicle safely within its original lane.
Climbing a pavement lip creates lateral momentum that will push the vehicle across center lines if not immediately counter-steered.

Anahtar Kavram

Off-Road Recovery and Pavement Edge Drop Management
Tahmini Süre:2m 0s
Soru 72Soru →

If your vehicle experiences complete foot brake failure while driving on a highway, arrange the emergency recovery steps in the correct chronological order from first action to last action.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order of emergency steps during complete foot brake failure is: first, pump the brake pedal rapidly to attempt pressure buildup; second, downshift to a lower gear to utilize engine braking; third, gently apply the parking brake while holding the release mechanism; and fourth, steer safely off the roadway onto the shoulder once speed has decreased.
The proper sequence for managing a total brake failure involves trying to restore hydraulic pressure first by pumping the brake pedal, followed by using engine braking through downshifting, then applying mechanical emergency braking via the parking brake with controlled release, and finally pulling off the roadway safely.

Adım Adım Çözüm

1
Pump the brake pedal rapidly
Attempts to build up remaining hydraulic pressure in the braking system.
This is the fastest potential fix to regain foot brake functionality.
2
Downshift to a lower gear
Uses the engine's compression to reduce vehicle speed without foot brakes.
Engine braking safely reduces momentum before applying mechanical handbrakes.
3
Apply the parking brake controlledly
Slows the rear wheels using the mechanical emergency cable.
Holding the release button prevents the rear wheels from locking up and sending the car into a skid.
4
Steer safely off the road
Clears the active traffic lane once the vehicle is under control.
Establishes a safe roadside stopping position to call for assistance.

Anahtar Kavram

Brake failure emergency response sequence
Soru 73Soru →

A driver traveling on an urban multi-lane road intends to move into the adjacent left lane. In what sequential order should the driver perform the following actions to safely execute the lane change?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence for executing a safe lane change is to check mirrors first, turn on the direction signal, perform a chin-to-shoulder head check into the blind spot, and finally steer smoothly into the target lane while maintaining appropriate speed.
Safe spatial management during a lane change follows a precise sequence: first observe traffic using interior and exterior mirrors, signal intent to alert surrounding traffic, perform a quick chin-to-shoulder head check to verify the blind spot is clear, and finally transition smoothly into the adjacent lane.

Adım Adım Çözüm

1
Check rearview and left side mirrors.
Monitors general traffic approaching from behind and in adjacent lanes.
Establishes baseline spatial awareness before alerting other drivers.
2
Turn on the left turn signal.
Communicates intention to change lanes to neighboring traffic.
Provides surrounding road users adequate notice before initiating movement.
3
Look over the left shoulder (chin-to-shoulder check).
Verifies that no hidden vehicle, motorcycle, or bicyclist occupies the blind spot.
Side mirrors leave unmonitored blind spots beside and behind the vehicle.
4
Steer into the target lane while maintaining speed.
Completes the transition safely without disrupting traffic flow.
Smooth steering and speed maintenance ensure a safe and predictable maneuver.

Anahtar Kavram

Sequential lane-change procedures and blind spot management (Mirrors, Signal, Shoulder check, Execute)
Soru 74Soru →

You are driving on a rural highway when your brake pedal suddenly sinks completely to the floor with zero resistance, indicating a total failure of the main hydraulic braking system. What is the correct sequence of emergency actions you should take to safely bring the vehicle to a complete stop?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct emergency sequence for handling total hydraulic brake failure is: 1) Pump the brake pedal rapidly several times, 2) Downshift the transmission into a lower gear, 3) Gently and gradually apply the parking brake while holding the release mechanism, and 4) Steer safely toward the emergency shoulder or off-road escape area once speed is reduced.
The proper sequence begins with rapid pedal pumping to test for residual hydraulic pressure. If that fails, engine braking via downshifting must be utilized to reduce momentum before applying the mechanical parking brake. The parking brake must be engaged gradually while keeping the release button depressed to prevent rear-wheel lockup. Finally, steering off the main roadway ensures a safe stop away from active traffic.

Adım Adım Çözüm

1
Attempt quick pressure recovery
Pumping the pedal quickly may build enough fluid pressure in a dual-circuit braking system to regain temporary stopping power.
This is a instantaneous non-destructive first attempt to regain standard braking.
2
Engage engine braking
Shifting into lower gears forces engine resistance to absorb vehicle kinetic energy and decelerate the car smoothly.
Reduces speed before applying secondary mechanical systems.
3
Apply mechanical emergency brake safely
Engaging the parking brake operates mechanical cables on the rear wheels to decelerate the vehicle further.
Holding the release button allows manual modulation to keep the rear tires from locking up and precipitating a skid.
4
Clear the roadway
Guide the low-speed vehicle completely off the traffic lanes.
Prevents collisions with following traffic once the vehicle comes to a full stop.

Anahtar Kavram

Hydraulic Brake Failure Recovery Procedure
Soru 75Soru →

If your vehicle experiences a total hydraulic brake failure while traveling on a highway, in what correct sequential order should you perform the following emergency recovery actions?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct emergency sequence for managing total brake failure is: first downshift into a lower gear to use engine braking, second pump the brake pedal rapidly to build pressure, third gently apply the parking brake while holding the release mechanism, and finally steer safely onto the shoulder and activate hazard lights.
When total brake failure occurs, the driver must first engine brake by downshifting to slow momentum safely. Next, pumping the brake pedal may build residual hydraulic pressure. If pressure fails, using the emergency brake gently while holding the release control provides manual friction without locking the rear wheels. Finally, steering off the road to a safe area and turning on hazard lights completes the stopping procedure safely.

Adım Adım Çözüm

1
Downshift the transmission into a lower gear
Engine braking initiates immediate deceleration without using hydraulic brakes
Reduces vehicle speed safely without locking up wheels or causing a loss of control.
2
Pump the brake pedal rapidly
May build temporary pressure in a partial hydraulic failure
Attempts to restore basic hydraulic stopping power.
3
Gradually apply the parking brake while keeping the release button held
Provides controlled mechanical braking force to the rear wheels
Allows manual deceleration while preventing rear-wheel lockup and skidding.
4
Guide the vehicle onto the shoulder or escape route and turn on hazard lights
The vehicle comes to a complete, safe stop out of the traffic lane
Removes the disabled vehicle from traffic flow and alerts surrounding drivers.

Anahtar Kavram

Brake Failure Emergency Recovery Sequence
Soru 76Soru →

A driver traveling on a multi-lane roadway needs to transition into the adjacent left lane. Arrange the following steps in the correct sequential order, from first to last, to safely manage spatial awareness and blind spots according to official DMV defensive driving guidelines.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequential order is: 1. Check the interior rearview mirror and left exterior side mirror to evaluate traffic flow behind and alongside. 2. Activate the left turn signal to communicate your intention to surrounding traffic. 3. Perform a chin-to-shoulder head check over your left shoulder directly into the left blind spot area. 4. Smoothly steer into the left lane while maintaining appropriate speed and following distance. 5. Deactivate the turn signal once the vehicle is fully centered in the new lane.
Safe lane changes mandate a systematic progression: assessing rear traffic via mirrors, signaling intent to surrounding road users, conducting a physical chin-to-shoulder head check directly into the blind spot zone immediately prior to steering, executing the lane change smoothly, and deactivating the signal upon arrival in the new lane.

Adım Adım Çözüm

1
Assess surrounding traffic using mirrors.
Driver verifies that traffic flow allows for a potential lane change.
Checking mirrors first builds initial situational awareness without unnecessarily signaling if traffic is completely blocked.
2
Signal intention to change lanes.
Surrounding motorists are alerted to the impending maneuver.
Communication must precede physical lane movement to allow nearby traffic adequate time to react.
3
Perform a chin-to-shoulder head check over the left shoulder.
The driver inspects the visual dead zone not covered by side or rearview mirrors.
Side mirrors leave unmonitored areas beside the rear quarter panel where adjacent vehicles, motorcycles, or bicycles may hide.
4
Steer into the target lane while maintaining safe speed.
The vehicle safely moves laterally into the new lane.
Execution should occur smoothly without sudden deceleration, maintaining proper speed flow.
5
Cancel the turn signal.
The indicator is turned off once established in the destination lane.
Leaving indicators active causes confusion for other drivers regarding further intended maneuvers.

Anahtar Kavram

Sequential lane-changing procedure and blind spot verification
Soru 77Soru →

After your vehicle's passenger-side wheels slip off the edge of a paved road onto an unpaved shoulder, in what order should you execute the following steps to safely return to the pavement?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The proper sequence for off-road recovery is: first, maintain a firm grip on the steering wheel to keep straight; second, ease off the gas pedal to reduce speed gradually; third, check traffic to ensure a clear path; fourth, turn smoothly about a quarter-turn toward the roadway to mount the pavement edge.
Safe edge-drop recovery requires controlling direction first by gripping the wheel, lowering speed gradually without aggressive braking, checking for clear traffic, and then turning moderately to climb back onto the paved surface.

Adım Adım Çözüm

1
Grip steering wheel firmly and stay straight
Prevents immediate rollover or vehicle drift into hazards
Uneven surfaces between pavement and shoulder exert sudden pull forces on steering.
2
Decelerate smoothly by releasing the accelerator
Lowers kinetic energy without locking tires or losing traction
Sudden hard braking on an unpaved shoulder often triggers a dangerous skid.
3
Perform a visual check of surrounding traffic
Confirms safe space available in the lane
Re-entering traffic without checking creates a collision risk with trailing vehicles.
4
Steer smoothly onto the pavement once speed is low and traffic is clear
Crosses the pavement drop-off edge cleanly
A small, controlled steering angle safely mounts the edge drop without overshooting into adjacent lanes.

Anahtar Kavram

Standard procedural order for safe shoulder drop-off recovery
Soru 78Soru →

A driver traveling on a multi-lane city street intends to execute a right turn into a side street across a designated bicycle lane. Arrange the following driver safety actions in the correct sequential order from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequential order of actions is: 1) Check the interior rearview mirror and right side-view mirror, 2) Activate the right turn signal, 3) Perform a physical chin-to-shoulder head check over the right shoulder, and 4) Merge into the turning position and complete the right turn.
Proper spatial awareness and blind spot management requires drivers to first check mirrors to evaluate overall traffic flow, signal intent to inform surrounding road users, perform a physical chin-to-shoulder head check to inspect blind spot areas not covered by mirrors, and finally occupy the turn lane or execute the maneuver.

Adım Adım Çözüm

1
Scan interior and right side-view mirrors.
Gains general awareness of vehicles and cyclists approaching from behind.
Mirror checks provide early situational awareness before initiating any lateral movement or signaling.
2
Activate the right turn signal.
Alerts nearby road users of the upcoming turn.
Traffic safety regulations mandate signaling prior to turning or changing lanes to give others adequate notice.
3
Perform a chin-to-shoulder head check to the right.
Verifies that no bicyclist or small vehicle is hidden in the vehicle's right blind spot.
Mirrors alone cannot view areas directly beside the rear quarter panel; a physical head check is mandatory.
4
Position the vehicle near the curb/bike lane edge and complete the turn.
Executes the turn safely without impeding or colliding with vulnerable road users.
Vehicle position changes must only take place after confirming the target space is entirely clear.

Anahtar Kavram

Sequential blind spot checking and signaling procedure for right turns across bicycle lanes
Tahmini Süre:1m 0s
Soru 79Soru →

While driving on a highway, your vehicle's engine temperature gauge spikes into the red zone and steam starts coming from under the hood. Arrange the following steps in the correct order to safely handle this engine overheating emergency.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins by turning off the A/C and turning on the heater to pull heat from the engine, followed by signaling and pulling off the road safely, shutting off the engine and turning on hazard lights, and finally waiting for the engine to cool completely before inspecting the radiator.
The proper emergency response for engine overheating requires immediate workload reduction (turning on the heater/turning off A/C), controlled pull-over out of traffic, shutting down the engine to halt heat buildup, and waiting for full thermal stabilization before attempting mechanical inspection.

Adım Adım Çözüm

1
Engage heater and turn off air conditioning immediately while driving.
Diverts excess engine heat into the cabin to mitigate rapid temperature increase.
Air conditioning adds heavy load to an overheating engine, whereas the heater radiator core acts as a secondary heat exchanger.
2
Signal and safely maneuver the vehicle onto the shoulder or off the highway.
Removes the vehicle from active traffic flow safely.
Driving further with an overheating engine risks complete engine seizure and blocking traffic.
3
Stop the vehicle, turn off the ignition, switch on hazard lights, and release the primary hood latch.
Halts heat generation, alerts other motorists, and permits trapped heat to escape.
Stopping the engine prevents catastrophic internal failure, and hazard lights ensure roadside visibility.
4
Allow the engine to cool down thoroughly before touching or removing the cooling system cap.
Prevents severe thermal burns from boiling pressurized coolant.
Cooling systems remain under dangerous pressure until completely cooled to ambient temperatures.

Anahtar Kavram

Engine Overheating Safety and Response Sequence
Soru 80Soru →

Arrange the following steps in the correct order for safely preparing for and navigating a descent down a steep mountain grade.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order begins with slowing down before the descent, downshifting into a lower gear prior to going downhill, relying on engine braking during the descent, and using intermittent light foot braking only when necessary.
The proper mountain descent procedure requires slowing down and downshifting into a lower gear before reaching the slope. Once on the grade, engine braking should serve as the primary speed control, with light, periodic foot braking applied only to keep speed within safe limits.

Adım Adım Çözüm

1
Slow down before reaching the incline
Establishes a safe entry speed prior to gravitational force pulling the vehicle downward.
It is much easier to maintain a slow speed down a grade than to slow down once already descending.
2
Select a lower gear before starting downhill
Engages engine compression braking.
Shifting into lower gear before the slope prevents momentum from making gear shifting difficult or impossible midway down.
3
Allow engine braking to control descent speed
Keeps speed regulated automatically without wearing out friction brakes.
Engine braking provides continuous resistance without generating brake pad friction heat.
4
Use light, brief foot braking only as needed
Supplements engine braking while giving brake pads time to cool down between taps.
Continuous foot braking causes brake overheating (thermal fade), leading to complete loss of stopping ability.

Anahtar Kavram

Engine braking and gear management for mountain grade descent
Tahmini Süre:45s
ÖncekiSayfa 4 / 9Sonraki
Tüm alıştırma soruları — DMV Permit Practice Test | Examkin