Examkin

Tüm alıştırma soruları

2524 soru

Tüm türler2,524Çoktan seçmeli1,281Çoklu seçim4Doğru / Yanlış972Eşleştirme89Sıralama178
Soru 961Soru →

Posted speed limits set the maximum speed at which a vehicle may legally travel under ideal weather and road conditions.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. Posted speed limits define the legal maximum speed allowable when driving conditions are ideal.
Posted speed limits designate the maximum lawful speed permitted when visibility, weather, and road conditions are clear and safe.

Adım Adım Çözüm

1
Recall the legal definition of posted maximum speed limits.
Posted signs designate the maximum lawful speed under clear and ideal conditions.
Traffic regulation establishes posted speed limits as the upper cap for vehicle movement.
2
Compare against driving requirements under adverse conditions.
Drivers must lower their speed below the posted maximum when road or weather hazards exist.
The Basic Speed Law dictates that safe speed depends on current hazards, making the posted limit the ceiling under clear conditions.

Anahtar Kavram

Posted Speed Limits and Maximum Legal Bounds
Soru 962Soru →

You are driving on a multi-lane highway next to a High-Occupancy Vehicle (HOV) carpool lane marked with painted white diamonds. The HOV lane is separated from your lane by a double solid white line. What is the legally required action if you wish to enter the HOV lane?

Cevabı ve açıklamayı göster

Cevap: Remain in your current lane until reaching a designated entry area marked by broken white lines.

Cevap

Remain in your current travel lane until you reach a designated entry/exit zone marked by broken white lines.
A double solid white line defines a restricted buffer zone where lane changing into or out of preferential HOV carpool lanes is strictly prohibited. Drivers must remain in their travel lane until encountering a designated entry/exit section marked by broken white lines.

Adım Adım Çözüm

1
Identify the specific pavement marking separating the general travel lane from the HOV special zone lane.
Recognize that a double solid white line separates the lanes.
Solid lines indicate restrictions on lane changing.
2
Apply traffic regulations regarding double solid pavement markings for preferential zones.
Determine that crossing double solid white lines is illegal under any circumstances.
Preferential lanes require drivers to enter and exit only at designated broken white line transition areas.

Anahtar Kavram

High-Occupancy Vehicle (HOV) Lane Access Rules and Double Solid Line Restrictions
Soru 963Soru →

While driving toward an intersection controlled by a steady red traffic light, a law enforcement officer directing traffic explicitly gestures for you to proceed through. Which action must you take?

Cevabı ve açıklamayı göster

Cevap: Follow the officer's instructions and proceed carefully through the intersection.

Cevap

Follow the officer's instructions and proceed carefully through the intersection.
Whenever a police officer or authorized traffic officer is manually directing traffic, their instructions take precedence over all standard traffic signals, signs, and pavement markings. Drivers are legally required to follow the officer's direction even when it contradicts a steady red light.

Adım Adım Çözüm

1
Identify the conflict between the automated traffic control device (steady red light) and the active manual control by a law enforcement officer.
Recognize that a traffic officer is actively managing traffic movement at the intersection.
Traffic laws establish clear priority rules for conflicting traffic control inputs.
2
Apply the rule governing signal priority.
The officer's hand signals override the steady red traffic light.
Direct instructions from authorized law enforcement personnel always supersede physical signals, signs, and pavement markings.

Anahtar Kavram

Traffic Officer Signal Priority
Tahmini Süre:45s
Soru 964Soru →

You are traveling on a two-lane roadway behind a slow-moving vehicle. What does a solid yellow line marked on your side of the center line indicate?

Cevabı ve açıklamayı göster

Cevap: Passing is strictly prohibited for vehicles traveling in your direction.

Cevap

Passing is strictly prohibited for vehicles traveling in your direction.
A solid yellow line on your side of the center line signifies a legally binding no-passing zone. Drivers moving in your direction are forbidden from crossing the center line to pass other vehicles.

Adım Adım Çözüm

1
Identify the pavement marking
The road features a solid yellow center line on the driver's side of the lane.
Pavement markings define where overtaking maneuvers are legally allowed or restricted.
2
Apply traffic regulations for yellow line markings
A solid yellow line on your side indicates a no-passing zone where crossing the line to overtake is illegal.
Solid lines separate opposing directions of traffic where visibility or road geometry makes passing unsafe.

Anahtar Kavram

Solid yellow centerline passing restrictions
Soru 965Soru →

As you approach an intersection controlled by a yield sign, you observe a row of solid white triangles painted transversely across your lane pointing toward your vehicle. What do these pavement markings indicate?

Cevabı ve açıklamayı göster

Cevap: A yield line requiring you to yield the right-of-way to cross traffic or pedestrians before proceeding.

Cevap

The painted white triangles indicate a yield line where drivers must yield the right-of-way to oncoming or conflicting traffic and pedestrians before crossing.
The correct option identifies the row of solid white triangles as a yield line (also known as shark's teeth). Painted across travel lanes at intersections and roundabouts, these triangles point toward approaching vehicles to indicate where drivers must yield the right-of-way to crossing traffic or pedestrians.

Adım Adım Çözüm

1
Identify the orientation and shape of the pavement marking.
The markings consist of a row of solid white triangles painted across the lane pointing toward approaching vehicles.
Recognizing the standardized visual appearance of transverse pavement markings establishes their legal function.
2
Recall the legal meaning of transverse solid white triangles (yield line / shark's teeth).
These markings denote the point at which a driver must yield the right-of-way.
Yield lines specify the point of yielding at intersections, roundabouts, and pedestrian crossings.
3
Distinguish yield line requirements from stop line requirements.
Drivers must slow down and stop if necessary to yield, but a complete stop is not mandatory if no conflicting traffic or pedestrians are present.
Unlike a single solid stop line, a yield line requires stopping only when yielding right-of-way is necessary.

Anahtar Kavram

Yield Lines (Shark's Teeth Pavement Markings)
Tahmini Süre:1m 0s
Soru 966Soru →

A red and white square regulatory sign displaying the phrase 'DO NOT ENTER' indicates that a driver is approaching a one-way roadway or ramp where traffic is traveling in the opposite direction, making it illegal to proceed past the sign.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

The statement is true. A 'DO NOT ENTER' sign legally prohibits vehicles from entering a roadway or ramp where traffic moves in the opposite direction.
The statement accurately describes the legal meaning of the 'DO NOT ENTER' regulatory sign, which prohibits entry onto ramps or streets carrying traffic in the opposite direction.

Adım Adım Çözüm

1
Identify the standard shape, color, and message of the regulatory sign in question.
A square sign with a red circle and white lettering reading 'DO NOT ENTER' is a standard regulatory sign.
Regulatory signs specify mandatory traffic laws and direction restrictions.
2
Determine the legal meaning and driver obligation associated with the 'DO NOT ENTER' sign.
The sign explicitly prohibits traffic from proceeding onto a roadway, highway exit ramp, or one-way street where traffic travels in the opposing direction.
Driving past this sign puts the vehicle in direct path of opposing traffic.

Anahtar Kavram

Meaning and legal obligation of 'DO NOT ENTER' regulatory signs
Soru 967Soru →

A driver facing a flashing yellow arrow traffic signal is permitted to make the turn after yielding to oncoming traffic and pedestrians.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

The statement is true. A flashing yellow arrow allows drivers to turn, but the turn is unprotected, meaning they must yield to oncoming traffic and pedestrians.
A flashing yellow arrow means turns are permitted, but drivers must yield to oncoming traffic and pedestrians before completing the turn because oncoming traffic has a green signal.

Adım Adım Çözüm

1
Identify the signal display
The traffic light shows a flashing yellow arrow.
Traffic signal light color and mode determine the legal right-of-way rules.
2
Apply the rule for a flashing yellow arrow
Turns are allowed, but turning traffic must yield to oncoming traffic and pedestrians.
Unlike a solid green arrow, a flashing yellow arrow does not provide a protected turn.

Anahtar Kavram

Flashing Yellow Arrow Meaning
Soru 968Soru →

When approaching an uncontrolled T-intersection where your road terminates, you must yield the right-of-way to vehicles traveling on the continuous through road.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. Drivers approaching an uncontrolled T-intersection on a road that ends must yield the right-of-way to traffic traveling on the continuous through street.
At an uncontrolled T-intersection, drivers on the terminating road are required by law to yield the right-of-way to vehicles moving on the through street.

Adım Adım Çözüm

1
Identify the intersection layout and control type.
The intersection is a T-intersection without stop signs, yield signs, or traffic signals (uncontrolled).
Establishing the intersection geometry and lack of control devices determines which standard right-of-way rule applies.
2
Apply standard DMV right-of-way laws for T-intersections.
Through traffic has precedence over traffic arriving from the terminating roadway.
Vehicles on the continuous through street maintain the right-of-way to allow smooth traffic flow and prevent broadside collisions.

Anahtar Kavram

T-Intersection Right-of-Way Priority
Soru 969Soru →

A driver on a two-lane highway has accelerated past a slower vehicle in the left lane. In what chronological sequence should the driver perform the following steps to safely return to the right lane?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence is: first, check the rearview mirror until both headlights of the passed vehicle are visible; second, activate the right turn signal; third, check the right shoulder blind spot; fourth, steer smoothly into the right lane; fifth, cancel the turn signal.
Returning safely after passing requires confirming sufficient longitudinal distance by looking for both headlights of the passed vehicle in the inside rearview mirror, signaling the return, checking the right blind spot over the shoulder, steering smoothly back into the lane, and finally disengaging the signal.

Adım Adım Çözüm

1
Verify forward spacing ahead of the passed vehicle
Both headlights of the passed car are visible in the inside rearview mirror, confirming safe distance.
Cutting in front of a passed vehicle too closely creates a serious rear-end collision hazard.
2
Signal intention to return
Right turn signal is activated.
Traffic laws require signaling intentions to surrounding motorists prior to changing lanes.
3
Check the right blind spot
Glance over the right shoulder to verify no adjacent hazards exist.
Mirrors do not cover the area directly beside the rear right side of the vehicle.
4
Execute lane change
The vehicle moves smoothly back into the right lane while maintaining speed.
Consistent speed prevents trailing vehicles from having to brake abruptly.
5
Cancel signal
Turn signal switch is disengaged.
Leaving turn signals on misinforms other road users of future intentions.

Anahtar Kavram

Safe Lane Return Sequence After Overtaking
Tahmini Süre:1m 15s
Soru 970Soru →

A driver traveling on a multi-lane roadway intends to execute a safe lane change to the left in heavy, moving traffic. Arrange the following steps of the lane-changing procedure in the correct chronological sequence from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The proper sequence for executing a lane change in traffic is: (1) Check mirrors to assess overall traffic, (2) Activate turn signal to communicate intent, (3) Perform a shoulder check to clear the blind spot, (4) Smoothly steer into the lane while maintaining appropriate speed, and (5) Cancel the turn signal once established in the destination lane.
Safe lane changing requires sequential observation, communication, physical verification, execution, and signal cancellation. Checking mirrors first confirms general feasibility, signaling alerts other motorists, checking blind spots over the shoulder confirms clear space, executing smoothly maintains flow, and canceling the signal prevents miscommunication.

Adım Adım Çözüm

1
Observe mirror traffic
Establishes situational awareness of rearward vehicles
Allows the driver to determine if there is a potential gap and if faster vehicles are approaching.
2
Signal intention early
Warns adjacent and following drivers of the upcoming action
Traffic laws mandate communicating intent prior to lateral movements.
3
Check left blind spot over the shoulder
Verifies that no vehicle, motorcycle, or cyclist is adjacent to the vehicle
Mirrors cannot eliminate blind spots directly beside the vehicle's rear quarters.
4
Execute smooth lane transition
Places the vehicle in the target lane without disruption
Maintaining flow speed prevents rear-end collisions from following vehicles in the target lane.
5
Cancel the indicator signal
Prevents confusion regarding further lane changes or turns
Leaves the vehicle in standard driving condition.

Anahtar Kavram

Standard Safe Lane-Changing Sequence and Blind Spot Management
Soru 971Soru →

When approaching a designated school zone equipped with active flashing yellow warning lights, a driver is legally required to reduce speed to the posted school zone limit only if children are visually observed near the roadway.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because active flashing yellow lights on a school zone speed limit sign indicate that the reduced speed limit is legally binding during that period. Drivers must slow down to the posted limit even if no children are visibly present, as children may be obscured from view or inside adjacent school buildings.

Adım Adım Çözüm

1
Identify the traffic control device and its operational status.
The school zone speed sign features active flashing yellow warning beacons.
Flashing yellow beacons serve as official notice that statutory school zone regulations are currently active.
2
Determine the driver's legal speed obligation.
The driver must immediately comply with the reduced posted speed limit (15 mph15\text{ mph} to 25 mph25\text{ mph} depending on local jurisdiction).
Legal compliance is triggered by the operational warning signal or posted operational hours, not by the visual detection of pedestrians.

Anahtar Kavram

School Zone Speed Regulation and Signal Compliance
Soru 972Soru →

When driving through a designated school zone equipped with active flashing yellow warning beacons, a motorist is legally permitted to maintain the standard posted street speed limit of 35 mph35\text{ mph} as long as no children are physically visible near the roadway or crosswalks.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Active flashing warning beacons legally enforce the reduced school zone speed limit, making compliance mandatory regardless of whether children are visually present.
Active flashing yellow beacons legally establish that the reduced school zone speed limit is in effect. Motorists are legally required to slow down to the designated school zone limit, and the absence of visible children does not exempt a driver from obeying active traffic control signals.

Adım Adım Çözüm

1
Identify the traffic regulation governing designated school zones.
School zones utilize specific traffic controls, such as posted operational hours or flashing yellow beacons, to establish enforceable lower speed limits.
Special statutory speed restrictions supersede standard posted speed limits when activated.
2
Analyze the legal significance of active flashing yellow beacons.
Active beacons indicate that the reduced speed restriction is currently in force.
Traffic control signals provide definitive legal notice of an active speed regulation zone.
3
Evaluate driver obligations under visual conditions.
Drivers must reduce their speed to the posted school zone limit even if no children or pedestrians are currently visible.
The legal obligation is triggered by the signal activation, not by the driver's subjective observation of children.

Anahtar Kavram

School Zone Speed Regulation Compliance
Soru 973Soru →

You are driving toward a signalized intersection where the overhead traffic signal displays a solid red light in your direction. A uniformed traffic officer standing in the center of the intersection explicitly gestures for your lane of traffic to proceed straight ahead. At the same time, an oncoming vehicle is waiting to execute a left turn across your lane. Which of the following actions must you take?

Cevabı ve açıklamayı göster

Cevap: Follow the traffic officer's direction and proceed straight through the intersection, taking precedence over both the red light signal and the turning vehicle.

Cevap

Follow the traffic officer's direction and proceed straight through the intersection, taking precedence over both the red light signal and the turning vehicle.
Directions given by an authorized traffic control officer or law enforcement officer supersede all traffic light signals, posted regulatory signs, and standard right-of-way rules. When an officer gestures for your lane to proceed, you must follow their instructions even if the overhead signal is red.

Adım Adım Çözüm

1
Identify the hierarchy of traffic control elements present at the intersection.
Recognize that a human traffic officer, an active electronic traffic signal displaying red, and an oncoming left-turning vehicle are all present.
Determining priority among conflicting signals is essential for traffic safety.
2
Apply the statutory rule regarding traffic officer authority.
Establish that manual signals from a uniformed law enforcement or traffic officer supersede electronic traffic lights, stop/yield signs, and general right-of-way conventions.
Traffic officers manage real-time road conditions and hold top priority in the traffic control hierarchy.
3
Determine the required vehicle action based on the officer's command.
Proceed straight as directed by the officer while exercising due caution for traffic clearance.
Obeying the officer's direct command maintains order and prevents confusion at the intersection.

Anahtar Kavram

Traffic Officer Signal Priority Over Standard Signals and Right-of-Way Rules
Tahmini Süre:1m 30s
Soru 974Soru →

When parking a vehicle facing uphill on a two-way street bordered by a raised curb, in which direction should the driver turn the front wheels to safely secure the vehicle?

Cevabı ve açıklamayı göster

Cevap: Away from the curb so that the back of a front tire would catch against the curb if the vehicle rolls backward

Cevap

Turn the front wheels away from the curb (to the left) so that the back of the front tire will catch against the curb face if the vehicle rolls backward.
When parking facing uphill with a curb, turning the front wheels away from the curb (to the left) ensures that if the vehicle starts to roll backward downhill, the back of the front tire will strike the curb, stopping the car safely.

Adım Adım Çözüm

1
Identify the incline direction and whether a raised curb is present
The vehicle is parked facing uphill alongside a raised curb.
The direction of the slope and presence of a curb determine how gravity will move the car if mechanical brakes fail.
2
Determine the direction the wheels must turn to block vehicle rollback
Turning wheels away from the curb (left) causes the back of the front tire to rest against or roll into the curb.
The curb acts as a physical chock stopping the vehicle from rolling down into the roadway.

Anahtar Kavram

Hill parking wheel orientation with a curb
Tahmini Süre:45s
Soru 975Soru →

When facing a steady solid yellow arrow light at an intersection, a driver who has not yet entered the intersection is permitted to begin a new turning maneuver as long as no oncoming vehicles are visible.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. A steady solid yellow arrow signal indicates that the protected turning phase is ending. Drivers who have not yet entered the intersection must prepare to stop and are not permitted to begin a new turn unless stopping safely is impossible.
The statement is false. A steady solid yellow arrow signals that the protected right-of-way for turning vehicles is ending. Drivers who are approaching the intersection and can stop safely must stop, and they may not start a new turn. Only drivers already within the intersection may clear it.

Adım Adım Çözüm

1
Identify the legal meaning of a steady solid yellow arrow signal.
A steady yellow arrow warns that the protected green turn arrow phase has expired and a red signal will follow shortly.
Traffic signal light phases follow strict standardized timing transitions to clear intersections safely.
2
Evaluate the required driver action before entering the intersection.
Drivers who have not yet entered the intersection must bring their vehicle to a safe stop rather than accelerating or entering to initiate a turn.
Entering an intersection on a solid yellow arrow when stopping safely is possible violates traffic laws and increases collision risks as cross traffic receives a green light.

Anahtar Kavram

Steady Yellow Arrow Signal Meaning and Driver Duty
Soru 976Soru →

When overtaking a slower vehicle on a two-lane roadway, a driver is legally permitted to temporarily exceed the posted speed limit to complete the pass quickly.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is False. Drivers must obey the posted speed limit at all times, including while passing another vehicle.
The statement is false because posted speed limits apply at all times. A driver must remain within the legal speed limit when executing a pass; if passing requires driving above the posted limit, the driver must refrain from passing.

Adım Adım Çözüm

1
Identify the traffic law regarding speed limits and overtaking.
Posted speed limits represent the maximum lawful speed under normal conditions.
Exceeding the speed limit is a traffic violation regardless of the maneuver being performed.
2
Evaluate the legality of exceeding the speed limit during a pass.
If passing requires exceeding the speed limit, the pass cannot be legally or safely executed.
Traffic laws do not grant speed exemptions for overtaking slower vehicles.

Anahtar Kavram

Speed Limit Compliance During Overtaking
Soru 977Soru →

On a multi-lane roadway, what does a travel lane marked on both sides by double broken yellow line pavement markings indicate?

Cevabı ve açıklamayı göster

Cevap: A reversible lane where the direction of traffic flow can change based on time of day or traffic demands.

Cevap

A reversible lane where the direction of traffic flow can change based on time of day or traffic demands.
Double broken yellow lines painted on both sides of a travel lane mark a reversible lane. In these lanes, traffic flow direction changes at specific times of the day, typically managed by overhead lane-use control signals or signs.

Adım Adım Çözüm

1
Identify the pavement marking description
The roadway features a lane bounded on both sides by double broken (dashed) yellow lines.
Double broken yellow lines are specific regulatory lane markers used for special traffic management lanes.
2
Apply traffic rule knowledge regarding double broken yellow lines
These lines signify a reversible lane.
Reversible lanes use double broken yellow lines to indicate that lane direction alternates depending on overhead lane-use control signals during peak commuting hours.

Anahtar Kavram

Reversible lane markings and traffic regulations
Soru 978Soru →

A motorist is driving at 45 mph on a two-lane rural highway with a 55 mph posted limit, following a tractor moving at 25 mph. The pavement markings transition from a solid yellow line to a broken yellow line on the driver's side. However, an advance railroad warning sign indicates a railroad grade crossing is located 150 feet ahead on the highway. Traffic in the opposing lane is completely clear for over half a mile. Under standard traffic safety laws, which course of action must the driver take?

Cevabı ve açıklamayı göster

Cevap: Remain behind the tractor without passing, because driving on the left side of the roadway is legally prohibited within 100 feet of any railroad grade crossing.

Cevap

The driver must remain behind the tractor without passing because passing on the left side of the roadway is legally prohibited within 100 feet of a railroad grade crossing.
Traffic safety statutes strictly prohibit driving on the left side of the roadway when approaching within 100 feet of any railroad grade crossing, intersection, bridge, or tunnel. Even though a broken yellow line indicates passing is otherwise allowed on that section of road, the driver cannot complete a pass within the remaining 150 feet without violating the mandatory 100-foot buffer zone around the tracks.

Adım Adım Çözüm

1
Analyze pavement marking permissions
A broken yellow line on the driver's side generally allows passing if clear, but is subordinate to specific statutory roadway hazards.
Roadway markings provide general clearance rules, but specific spatial laws override line markings.
2
Evaluate distance and statutory passing prohibitions
The railroad grade crossing is 150 feet ahead. Safe passing requires several hundred feet of roadway distance.
Executing a pass from 150 feet away will inevitably force the vehicle into the left lane within the restricted 100-foot buffer zone prior to the tracks.
3
Apply the statutory rule for railroad crossings
Driving on the left side of the center line within 100 feet of any railroad grade crossing is strictly prohibited by law.
The driver cannot legally or safely complete the pass prior to entering the restricted 100-foot boundary.

Anahtar Kavram

Statutory Passing Prohibitions Near Railroad Crossings and Intersections
Soru 979Soru →

A driver on a multi-lane highway needs to change lanes into an adjacent lane with dense, high-speed traffic. In what correct sequential order should the driver perform the required steps to complete this lane change safely and legally?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The proper sequence for executing a safe lane change is: first assess traffic using inside and side mirrors, next activate the turn signal to communicate intent, then perform a direct shoulder check to clear the blind spot, smoothly transition into the target lane while matching traffic speed, and finally cancel the turn signal once fully established in the lane.
The correct sequence prioritizes situational awareness and communication before physical execution. Drivers must first observe traffic in their mirrors, signal their intention to allow surrounding traffic to adapt, visually clear their blind spot over the shoulder, execute the lane transition while matching traffic speed, and lastly turn off the indicator signal upon establishing position in the new lane.

Adım Adım Çözüm

1
Assess traffic through mirrors
Driver gains spatial awareness of traffic flow in the target lane.
Mirrors provide the initial information needed to locate safe potential gaps in surrounding traffic.
2
Signal intention early
Surrounding motorists are alerted to the impending maneuver.
State traffic laws mandate signaling prior to lane changes to ensure predictable driving behavior.
3
Conduct a shoulder blind-spot check
Areas outside mirror view are verified clear of adjacent vehicles.
Mirrors leave critical blind spots directly adjacent to the rear quarter panels that can only be checked visually over the shoulder.
4
Execute lane entry and match speed
The vehicle enters the target lane without disrupting surrounding traffic.
Matching the speed of target-lane traffic prevents rear-end collisions and maintains safe following distances.
5
Deactivate turn signal
Traffic communication is reset to standard operation.
Leaving turn signals on after completing a lane change creates miscommunication and potential hazards for trailing drivers.

Anahtar Kavram

Safe Lane Changing Procedure and Blind Spot Management
Tahmini Süre:1m 30s
Soru 980Soru →

Drivers displaying a valid disabled parking placard or license plate are legally permitted to park their vehicle inside the painted diagonal crosshatch markings (access aisle) adjacent to an accessible parking space.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Painted diagonal crosshatch markings represent access aisles that must remain clear at all times to permit ramp and wheelchair operation, and parking within them is illegal for all vehicles.
The statement is false because diagonal crosshatch pavement markings mark an access aisle, not a parking stall. These aisles provide necessary clearance for vehicle wheelchair lifts and ramp deployment. Parking, stopping, or standing inside an access aisle is illegal at all times for all vehicles, even those displaying a valid disabled placard or license plate.

Adım Adım Çözüm

1
Identify the purpose of painted diagonal crosshatch markings adjacent to accessible parking spaces.
Recognize that these markings define access aisles for loading and unloading passengers who use wheelchairs or other mobility aids.
Vehicle ramps and lifts need designated clear ground space to deploy safely.
2
Determine whether parking restrictions in access aisles apply to drivers holding valid disabled parking placards.
Confirm that parking inside crosshatched access aisles is prohibited for all vehicles without exception.
Blocking an access aisle renders adjacent accessible parking spaces unusable for drivers who rely on wheelchair ramps.

Anahtar Kavram

Accessible Parking Zone Access Aisles
Tahmini Süre:1m 0s
ÖncekiSayfa 49 / 127Sonraki
Tüm alıştırma soruları — DMV Permit Practice Test | Examkin