Tüm alıştırma soruları

2524 soru

Soru 1001Soru

Arrange the following steps in the correct procedural order for executing a safe lane change on a multi-lane roadway.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence for a safe lane change is to activate your turn signal, check rear-view and side-view mirrors, perform an over-the-shoulder blind spot check, steer smoothly into the target lane, and deactivate your turn signal.
Safe driving procedures require alerting traffic first with turn signals, evaluating surroundings using mirrors, verifying clear space with a direct shoulder check, executing the maneuver smoothly, and canceling the signal upon completion.

Adım Adım Çözüm

1
Signal intention
Surrounding traffic is warned of your planned maneuver.
Early signaling gives other motorists sufficient time to react before you move.
2
Check mirrors
Awareness of vehicles behind and alongside is established.
Mirrors provide a quick visual scan of overall traffic conditions.
3
Perform over-the-shoulder blind spot check
Areas outside mirror coverage are confirmed clear of traffic.
Rearview and side mirrors leave blind spots where smaller vehicles or motorcycles can hide.
4
Steer into the new lane
The vehicle transitions smoothly into the target lane.
Vehicle movement must occur only after space and safety are verified.
5
Cancel signal
The directional indicator is turned off.
Leaving signals active misleads other road users regarding your trajectory.

Anahtar Kavram

Sequential safety procedure for lane changing (SMOG method: Signal, Mirrors, Over-the-shoulder, Go)
Soru 1002Soru

A driver who needs to enter a destination into a navigation application is legally permitted to pull over and stop in a roadside bay marked with an 'EMERGENCY STOPPING ONLY' sign.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Roadside bays marked with 'EMERGENCY STOPPING ONLY' signs are legally restricted to genuine emergencies and may not be used for non-emergency activities such as updating GPS settings.
The statement is false. Roadway shoulders and constructed turn-out bays controlled by 'EMERGENCY STOPPING ONLY' signs are legally restricted to legitimate vehicle failures, flat tires, medical emergencies, or police directives. Routine driver activities, including managing navigation apps or making non-emergency calls, must take place in designated parking areas or off-freeway locations.

Adım Adım Çözüm

1
Identify the regulatory restrictions associated with the special zone sign.
The sign designates the area specifically for emergency stopping.
Special zone regulatory signs define the legal conditions under which a driver may enter or use restricted roadside infrastructure.
2
Evaluate whether the driver's situation meets the legal criteria for an emergency stop.
Entering GPS directions is a routine administrative task, not a vehicle disablement or safety emergency.
DMV regulations limit emergency bay usage exclusively to critical failures or immediate safety hazards to prevent unnecessary obstructions on high-speed roadways.

Anahtar Kavram

Special Zone Sign Regulations for Highway Emergency Bays
Tahmini Süre:45s
Soru 1003Soru

On a multi-lane controlled-access highway with a posted minimum speed limit, a motorist is legally prohibited from driving below that minimum speed under any circumstances, including during severe weather or hazardous road conditions.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is False. Statutory minimum speed limits apply only under normal driving conditions and do not mandate drivers to maintain speed when severe weather or road hazards make doing so unsafe.
The statement is false because statutory traffic codes explicitly permit drivers to operate below posted minimum speed limits when reduced speed is necessary for safe operation due to weather, visibility, traffic, or road surface hazards.

Adım Adım Çözüm

1
Identify the purpose of posted minimum speed limits on controlled-access highways.
Minimum speed limits exist to prevent traffic impedance and rear-end collisions during normal, clear driving conditions.
Maintaining uniform traffic flow reduces congestion and passing hazards.
2
Analyze how the Basic Speed Law interacts with posted minimum limits.
The Basic Speed Law dictates that no person shall drive at a speed greater or less than is reasonable and prudent under existing hazards.
Safety requirements take precedence over posted speed markers when conditions degrade.
3
Determine legal compliance during hazardous conditions.
When severe weather, dense fog, or slick road surfaces occur, driving below the posted minimum limit is not only legally permitted, but required for safe operation.
Failing to slow down below the minimum speed in hazardous weather constitutes unsafe driving.

Anahtar Kavram

Hierarchy of Basic Speed Law Over Posted Minimum Speed Limits
Soru 1004Soru

You are driving on a two-lane roadway and approach a special zone marked by a yellow circular advance warning sign displaying a black 'X' with the letters 'RR'. Which driving action is legally prohibited within 100 feet of approaching or crossing this designated zone?

Cevabı ve açıklamayı göster

Cevap: Overtaking and passing another vehicle traveling in the same direction

Cevap

Overtaking and passing another vehicle traveling in the same direction is legally prohibited within 100 feet of a railroad crossing zone.
Traffic safety regulations specifically prohibit passing or driving on the left side of the roadway within 100 feet of any railroad grade crossing. This rule prevents head-on collisions and obstruction of vision where vehicles may need to stop suddenly for rail traffic.

Adım Adım Çözüm

1
Identify the special zone sign and marking
The yellow circular sign with a black 'X' and 'RR' is the Railroad Advance Warning sign, indicating an upcoming railroad grade crossing.
Recognizing special zone signage establishes the specific legal rules and driving restrictions that apply to that section of roadway.
2
Apply traffic laws governing passing rules near special crossing zones
Under standard DMV rules of the road, drivers must not cross center pavement markings to pass another vehicle within 100 feet of a bridge, tunnel, intersection, or railroad grade crossing.
Limited visibility and the sudden presence of oncoming trains or stopped traffic make passing extremely hazardous near railroad tracks.

Anahtar Kavram

Railroad Crossing Zone Driving Restrictions and Passing Limitations
Soru 1005Soru

You are driving toward an intersection and the circular traffic light changes from green to steady yellow. If you are able to stop safely before entering the intersection, what is your legally required action?

Cevabı ve açıklamayı göster

Cevap: Come to a safe stop prior to entering the intersection.

Cevap

Come to a safe stop prior to entering the intersection.
A steady circular yellow traffic light warns that the signal will soon turn red. When a driver can stop safely before entering the intersection, they must bring the vehicle to a complete stop.

Adım Adım Çözüm

1
Identify the legal meaning of a steady yellow circular traffic light.
Recognize that a steady yellow light signals that the green light is ending and a red light is imminent.
Traffic safety regulations require drivers facing a yellow light to stop before entering the intersection unless they are already inside or cannot stop safely.

Anahtar Kavram

Steady Yellow Signal Rules
Soru 1006Soru

On a two-lane roadway, a driver is legally permitted to drive onto the paved right shoulder to pass a vehicle ahead that is slowing down or stopped to make a left turn.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The correct evaluation is False because state and international driver knowledge standards forbid passing on the right by driving onto the shoulder—whether paved or unpaved—even if the lead vehicle is turning left.

Adım Adım Çözüm

1
Analyze the legal definition of the roadway shoulder during driving maneuvers.
The shoulder is designated for emergency stopping and breakdown use, not for normal vehicular travel or passing.
Traffic laws explicitly define the main-traveled roadway as the only legal area for moving traffic.
2
Evaluate passing-on-the-right exceptions.
Passing on the right is only legal when there is an available, unobstructed lane of travel or sufficient roadway width on the paved main road without leaving the traveled lanes.
Using the shoulder to pass creates severe collision hazards with pedestrians, bicyclists, or stopped emergency vehicles.

Anahtar Kavram

Prohibition of Passing on the Roadway Shoulder
Soru 1007Soru

You are driving on a two-lane road with a broken yellow centerline, which normally permits passing when safe. However, you are approaching an intersection that is 75 feet ahead. Which rule governs your ability to pass another vehicle in this scenario?

Cevabı ve açıklamayı göster

Cevap: Passing is prohibited because drivers may not cross into the opposing lane to pass within 100 feet of an intersection.

Cevap

Passing is prohibited because drivers may not cross into the opposing lane to pass within 100 feet of an intersection.
While a broken yellow line typically indicates that passing is allowed when safe, traffic laws establish absolute prohibitions against passing on the left side of the road within 100 feet of an intersection. Because the vehicle is 75 feet from the intersection, passing is illegal.

Adım Adım Çözüm

1
Identify general lane marking rule
A broken yellow centerline indicates that passing is generally permitted when traffic conditions are safe.
Yellow lines separate opposing traffic, and broken lines permit crossing to pass.
2
Apply statutory location-based passing restrictions
Passing is prohibited within 100 feet of an intersection, railroad crossing, bridge, or tunnel.
Specific statutory safety hazards supersede standard pavement marking permissions.
3
Synthesize the scenario conditions
Since the intersection is 75 feet ahead (less than 100 feet), passing is illegal regardless of the broken yellow line.
The 100-foot intersection proximity rule takes precedence over the broken yellow line.

Anahtar Kavram

Passing restrictions near intersections taking priority over broken centerline markings
Soru 1008Soru

A motorist turns onto a road in a residential area where no speed limit signs are posted. Unless otherwise posted, what is the standard prima facie maximum speed limit in a residential district?

Cevabı ve açıklamayı göster

Cevap: 25 mph

Cevap

The standard prima facie speed limit in a residential district, unless posted otherwise, is 25 mph.
State traffic laws establish a default (prima facie) speed limit of 25 mph for residential districts when no specific speed limit signs are posted.

Adım Adım Çözüm

1
Identify the driving environment presented in the question stem.
The environment specified is an unposted residential district.
Traffic safety regulations establish default (prima facie) speed limits when signs are not explicitly posted.
2
Recall statutory default speed limits for residential streets.
The standard default speed limit for residential areas is 25 mph.
Lower default limits are enforced in neighborhoods to protect pedestrians, bicyclists, and neighborhood traffic.

Anahtar Kavram

Prima Facie Residential Speed Limits
Tahmini Süre:45s
Soru 1009Soru

A driver approaching a railroad grade crossing posted with a white rectangular 'DO NOT STOP ON TRACKS' regulatory sign is legally permitted to pause their vehicle on the tracks while waiting for traffic ahead to move, provided no train is currently visible or signaling an approach.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is false. Drivers must never enter or stop on railroad tracks when posted with a 'DO NOT STOP ON TRACKS' regulatory sign unless there is sufficient space on the opposite side to clear the tracks completely.
The statement is false because the white rectangular 'DO NOT STOP ON TRACKS' regulatory sign imposes a mandatory prohibition against stopping any vehicle on the tracks at any time. Drivers must wait on the approach side of the crossing until traffic beyond the tracks has advanced enough to allow their entire vehicle to cross safely without stopping on the rails.

Adım Adım Çözüm

1
Identify the mandate of the 'DO NOT STOP ON TRACKS' regulatory sign.
The sign creates an explicit legal duty preventing any vehicle from coming to a stop within the railroad crossing boundaries.
Regulatory signs convey mandatory traffic laws that must be obeyed regardless of immediate train presence.
2
Evaluate proper driver behavior when traffic ahead is congested at a railroad crossing.
The driver must stop and wait behind the pavement stop line before the tracks until forward traffic moves far enough to accommodate the vehicle completely beyond the crossing.
Stopping on tracks creates a severe safety hazard if a train approaches unexpectedly or if traffic stops abruptly.

Anahtar Kavram

DO NOT STOP ON TRACKS regulatory sign compliance
Soru 1010Soru

A motorist is selecting a street parking location near an active railroad track. Under standard traffic safety regulations, what is the minimum statutory distance from the nearest rail of a railroad crossing within which parking or stopping a vehicle is strictly prohibited?

Cevabı ve açıklamayı göster

Cevap: 50 feet

Cevap

50 feet is the minimum statutory distance from the nearest rail of a railroad crossing where parking or stopping a vehicle is strictly prohibited under standard traffic laws.
Under standard traffic regulations, parking, standing, or stopping a motor vehicle within 50 feet of the nearest rail of a railroad crossing is strictly prohibited to maintain adequate sight lines for all drivers and ensure safety near tracks.

Adım Adım Çözüm

1
Identify the target highway control feature in the scenario.
The target hazard feature is an active railroad crossing rail.
Different traffic control elements and hazards carry distinct statutory buffer zone distances.
2
Recall the statutory parking prohibition distance specific to railroad tracks.
Standard DMV regulations establish a 50-foot clear zone from the nearest rail.
Maintaining a 50-foot clearance prevents vision obstruction for approaching drivers and avoids trapping vehicles near tracks or signals.
3
Differentiate from adjacent traffic distance regulations.
Confirm that 15 feet applies to fire hydrants, 30 feet applies to traffic control signs/signals, and 100 feet applies to passing prohibitions near tracks.
Selecting 50 feet correctly distinguishes parking safety bounds from passing or sign-proximity rules.

Anahtar Kavram

Statutory Parking Distance Prohibitions at Railroad Crossings
Tahmini Süre:1m 30s
Soru 1011Soru

Under standard traffic regulations, a motorist driving on a highway with a posted minimum speed limit is legally obligated to maintain at least that speed, even when severe weather creates hazardous driving conditions.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is false. Traffic safety regulations permit drivers to operate below posted minimum speed limits whenever adverse weather, poor visibility, or road hazards render traveling at the minimum speed unsafe.
The statement is false because traffic laws allow drivers to operate below posted minimum speed limits when adverse weather, reduced visibility, or unsafe road surface conditions require lower speeds for safe driving.

Adım Adım Çözüm

1
Analyze the legal relationship between posted minimum speed limits and environmental conditions.
Identify that posted minimum speed limits are intended for normal, clear driving conditions.
Minimum speed regulations exist to prevent traffic congestion, but safety mandates always take precedence.
2
Apply the Basic Speed Law governing speed regulation.
Conclude that driving below the posted minimum speed is legal when necessary for safe vehicle operation.
Statutory rules prohibiting impedance of traffic specifically exempt drivers who reduce speed for safety due to weather or road hazards.

Anahtar Kavram

Basic Speed Law Exception to Minimum Speed Limits
Tahmini Süre:45s
Soru 1012Soru

What does a double solid yellow line painted along the center of a two-lane roadway indicate?

Cevabı ve açıklamayı göster

Cevap: Passing is prohibited for vehicles traveling in both directions.

Cevap

A double solid yellow line indicates that passing is prohibited for vehicles traveling in both directions.
Double solid yellow centerlines designate a no-passing zone for traffic in both directions. Drivers may not cross these lines to overtake or pass other vehicles.

Adım Adım Çözüm

1
Identify the color and pattern of the pavement marking
The marking consists of double solid yellow lines running down the center of the road.
Yellow lines separate opposing traffic streams, while solid line patterns indicate restriction on crossing to pass.
2
Apply standard traffic law rules for double solid yellow lines
Neither side of traffic may cross double solid yellow lines to overtake or pass another vehicle.
Double solid yellow lines signify a strict no-passing zone for both directions of travel.

Anahtar Kavram

Double Solid Yellow Lines (No-Passing Zone)
Soru 1013Soru

When approaching a yellow, diamond-shaped warning sign depicting a straight vertical arrow with a side arrow merging into it from the right (W4-1 Merging Traffic), drivers already traveling on the main roadway are legally required to come to a complete stop to allow entering vehicles to merge.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is False. Drivers on the main roadway are advised to adjust speed or change lanes if safe, but entering traffic must yield the right-of-way.
The correct answer is False because the Merging Traffic warning sign (W4-1) serves an advisory purpose to inform main-road drivers of approaching vehicle streams. Main-road drivers should remain alert and adjust spacing if possible, but legal right-of-way remains with traffic already on the highway.

Adım Adım Çözüm

1
Identify the sign category and standard meaning
The yellow diamond sign with a merging arrow symbol (W4-1) is a warning sign alerting drivers that traffic is entering from another roadway.
Warning signs warn drivers of upcoming roadway conditions requiring attention, but do not establish mandatory regulatory controls like STOP signs.
2
Determine legal right-of-way rules for merging situations
Traffic already on the main roadway maintains the right-of-way. Merging vehicles are required to adjust speed and yield before blending into traffic.
Main-line traffic should assist merging by adjusting speed or changing lanes if safe, but is not legally required to stop.

Anahtar Kavram

Merging Traffic Warning Sign Responsibilities
Tahmini Süre:45s
Soru 1014Soru

On a roadway featuring a designated center two-way left-turn lane (marked by solid outer yellow lines and broken inner yellow lines), a motorist may legally enter and drive in this center lane to overtake and pass slower-moving traffic traveling in the same direction.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is false. Center two-way left-turn lanes are legally designated solely for making left turns and must never be used for passing or overtaking moving vehicles.
State traffic safety laws strictly restrict center two-way left-turn lanes to vehicles preparing to make left turns or merging into traffic from a driveway/side street. Using this lane to pass or overtake moving vehicles is prohibited because opposing traffic utilizes the exact same lane for turning.

Adım Adım Çözüm

1
Identify the lane marking and classification in the scenario.
The roadway contains a center two-way left-turn lane bounded by inner broken yellow lines and outer solid yellow lines.
Properly classifying the roadway markings determines legal lane usage under traffic safety statutes.
2
Evaluate statutory traffic rules regarding center turn lane usage.
Motor vehicle codes specify that center left-turn lanes are strictly designated for preparing to turn left or merging after completing a left turn.
Traffic law prohibits using shared turn lanes as continuous travel lanes or passing lanes because vehicles from both opposing directions share the space.
3
Determine the legality of passing in this lane.
Using the center turn lane to accelerate around or overtake slower vehicles moving in the same direction constitutes a moving violation.
Executing passing maneuvers in a shared turn lane creates a severe risk of head-on collisions with oncoming vehicles turning left.

Anahtar Kavram

Center Two-Way Left-Turn Lane Usage Restrictions
Tahmini Süre:1m 15s
Soru 1015Soru

Because motorcycles weigh significantly less than passenger cars, a motorcycle traveling at highway speeds can generally stop in a shorter distance during emergency braking than a standard automobile.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is False. Drivers should not assume a motorcycle can stop faster than a car, as motorcycles have significantly less tire surface contact with the road and require complex balance during maximum braking.
The correct answer is False. Standard passenger cars can often stop as quickly as or quicker than motorcycles because four wide tires provide far more traction and braking stability on the road surface.

Adım Adım Çözüm

1
Analyze the physical factors influencing braking performance for motorcycles versus passenger cars.
Determine that braking effectiveness relies heavily on total tire-to-road contact area and vehicle stability, not weight alone.
Tires supply the friction needed to decelerate a vehicle.
2
Evaluate motorcycle braking dynamics during an emergency stop.
Recognize that a motorcyclist operates separate front and rear brake controls while maintaining two-wheel equilibrium, increasing the skill and distance required to execute a safe stop compared to an automobile.
Improper braking on a motorcycle can cause wheel lockup, skidding, or a fatal capsize.

Anahtar Kavram

Motorcycle Braking Dynamics and Stopping Distance
Soru 1016Soru

A motorist is driving along a highway with a posted maximum speed limit of 55 mph55\text{ mph}. Heavy rainfall and dense fog suddenly reduce visibility to less than 100 feet100\text{ feet}. The driver then enters an active school zone equipped with flashing yellow beacons and a posted speed limit of 25 mph25\text{ mph}. Under statutory traffic regulations, what is the maximum speed at which the motorist may legally operate the vehicle under these exact conditions?

Cevabı ve açıklamayı göster

Cevap: A speed below 25 mph25\text{ mph} that is reasonable and prudent for the reduced visibility and road hazards, even if it requires driving significantly slower or stopping.

Cevap

The motorist must drive at a speed lower than 25 mph25\text{ mph} that is reasonable and prudent for the severely reduced visibility and wet surface conditions.
Under traffic safety laws, the Basic Speed Law acts as an overarching requirement: drivers must adjust their speed to what is safe and prudent for current weather, road, and traffic conditions. Even though the active school zone sets a posted maximum of 25 mph25\text{ mph}, severe weather conditions such as fog reducing visibility to under 100 feet100\text{ feet} make driving at 25 mph25\text{ mph} unsafe. Therefore, the driver is legally obligated to drive below 25 mph25\text{ mph}.

Adım Adım Çözüm

1
Identify the posted maximum speed constraints for the location.
The standard highway limit is 55 mph55\text{ mph}, but the active school zone with flashing beacons reduces the maximum posted limit to 25 mph25\text{ mph}.
Regulatory signs and active zone indicators establish the absolute upper boundary under ideal conditions.
2
Apply the Basic Speed Law to the environmental hazard context.
Because heavy rain and fog reduce visibility to under 100 feet100\text{ feet}, driving at the posted 25 mph25\text{ mph} limit may be unsafe.
The Basic Speed Law mandates that no person shall drive a vehicle at a speed greater than is reasonable or prudent having due regard for weather, visibility, and traffic.
3
Synthesize posted limit restrictions with condition-based speed mandates.
The lawful speed is determined by the safer requirement—which in severe weather is below the 25 mph25\text{ mph} posted limit.
Posted limits represent maximum safe speeds under ideal conditions; hazardous weather requires further speed reduction.

Anahtar Kavram

Basic Speed Law vs. Posted Maximum Speed Limits
Soru 1017Soru

In a designated highway work zone, posted reduced speed limits are legally enforceable only when construction workers are physically present on the roadway.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Posted reduced speed limits in highway work zones are legally enforceable at all times (or during posted times), regardless of whether construction workers are physically present.
The correct answer is False because posted work zone speed limits are statutory regulatory limits. They remain legally binding at all times unless specific sign sub-plates state otherwise, because dangerous road conditions and altered lane layouts remain present even when workers are off-duty.

Adım Adım Çözüm

1
Identify the legal authority of posted regulatory speed limit signs in work zones.
Posted speed limit signs establish mandatory legal maximum speeds upon entering the designated zone.
Regulatory signs apply standard legal speed enforcement unless auxiliary signs explicitly restrict enforcement hours.
2
Evaluate whether physical worker presence is required for enforcement.
Worker presence is not required for the speed limit to be legally binding.
Work zones present continuous structural hazards—such as reduced lane widths, concrete barriers, rough pavement, and unexpected lane shifts—that require reduced speeds even when no workers are active.

Anahtar Kavram

Work Zone Speed Limit Enforcement
Tahmini Süre:45s
Soru 1018Soru

You are driving on a two-lane road when another vehicle begins to overtake and pass you on the left. What is your legal responsibility as the driver being passed?

Cevabı ve açıklamayı göster

Cevap: Maintain your current speed and position, keeping to the right side of your lane without accelerating.

Cevap

Maintain your current speed and position, keeping to the right side of your lane without accelerating.
When being overtaken on a two-lane road, a driver must give way to the right upon hearing a signal or seeing the passing vehicle, and must not increase speed until the passing maneuver is completely finished.

Adım Adım Çözüm

1
Identify the scenario role
You are the vehicle being passed (overtaken) on a two-lane road.
Traffic laws specify separate rules for the passing vehicle and the vehicle being passed.
2
Apply traffic regulations for being overtaken
Keep to the right of your lane and maintain a steady speed.
Increasing speed prolongs the time the passing vehicle remains in the opposing traffic lane, creating a dangerous hazard.

Anahtar Kavram

Duties of a Driver Being Overtaken
Tahmini Süre:45s
Soru 1019Soru

You are driving Vehicle A and arrive at an uncontrolled four-way intersection at the exact same time as two other vehicles: Vehicle B, approaching from the roadway to your right, and Vehicle C, approaching from the roadway to your left. If all three vehicles intend to proceed straight through the intersection, which vehicle has the legal right-of-way to proceed first?

Cevabı ve açıklamayı göster

Cevap: Vehicle B, because at an uncontrolled intersection drivers must yield to the vehicle on their right.

Cevap

Vehicle B has the legal right-of-way to proceed first because it is to the right of Vehicle A, while Vehicle A is to the right of Vehicle C.
When three vehicles arrive simultaneously at an uncontrolled four-way intersection, right-of-way is established by evaluating the vehicle on the right for each driver. Vehicle C sees Vehicle A to its right and must yield. Vehicle A sees Vehicle B to its right and must yield. Vehicle B has no vehicle on its right; therefore, Vehicle B proceeds first, followed by Vehicle A, and finally Vehicle C.

Adım Adım Çözüm

1
Identify the intersection type and arrival timing.
The intersection is uncontrolled (no traffic signals or signs), and all three vehicles (A, B, C) arrived at the exact same time.
Simultaneous arrival at an uncontrolled intersection requires applying statutory yield rules based on vehicle orientation.
2
Apply the right-of-hand yield rule across all approaching vehicles.
Vehicle C must yield to Vehicle A (on its right). Vehicle A must yield to Vehicle B (on its right).
At uncontrolled intersections, drivers are required to yield the right-of-way to vehicles approaching from their immediate right.
3
Determine which vehicle has no requirement to yield to another vehicle.
Vehicle B has no vehicle approaching from its immediate right, so it proceeds first.
Since Vehicle B is cleared by the right-hand rule, it has right-of-way precedence before Vehicle A and Vehicle C.

Anahtar Kavram

Uncontrolled Intersection Right-of-Way (Right-Hand Rule)
Tahmini Süre:1m 30s
Soru 1020Soru

When two vehicles arrive at an uncontrolled four-way intersection at the exact same time from perpendicular roads, which driver has the right-of-way?

Cevabı ve açıklamayı göster

Cevap: The driver on the right

Cevap

The driver on the right has the right-of-way.
When two vehicles reach an uncontrolled intersection at the exact same time, traffic law establishes that the driver on the left must yield the right-of-way to the driver on the right.

Adım Adım Çözüm

1
Identify the intersection type and control state.
The scenario describes an uncontrolled four-way intersection (no signals or stop signs present).
Right-of-way rules vary depending on control devices and intersection layout.
2
Evaluate the arrival conditions.
Both vehicles arrived at the exact same time from perpendicular directions.
Since neither vehicle arrived first, position relative to each other determines precedence.
3
Apply the standard uncontrolled intersection right-of-way rule.
The driver on the left yields, giving the right-of-way to the vehicle on the right.
Standard traffic regulations mandate yielding to traffic approaching from your right at uncontrolled intersections.

Anahtar Kavram

Uncontrolled Intersection Right-of-Way
ÖncekiSayfa 51 / 127Sonraki
Tüm alıştırma soruları — DMV Permit Practice Test | Examkin