Examkin

Tüm alıştırma soruları

178 soru

Tüm türler2,524Çoktan seçmeli1,281Çoklu seçim4Doğru / Yanlış972Eşleştirme89Sıralama178
Soru 121Soru →

Three vehicles approach a four-way stop-controlled intersection and come to a complete stop sequentially at different times. Place the vehicles in the correct order in which they have the right-of-way to proceed through the intersection.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The vehicles should proceed in order of arrival: Vehicle A first, Vehicle B second, and Vehicle C third.
Under standard traffic laws, multi-way stop intersections operate under a strict first-come, first-served rule. The vehicle that arrives and stops first maintains right-of-way over vehicles arriving later, regardless of whether a vehicle is turning or going straight.

Adım Adım Çözüm

1
Identify the primary rule governing four-way stop intersections.
Right-of-way is granted on a first-come, first-served basis according to complete stop arrival order.
Standard traffic regulations mandate that when vehicles arrive at a multi-way stop at different times, arrival sequence determines movement order.
2
Sequence the vehicles according to their arrival times.
Vehicle A (first to stop) goes first, Vehicle B (second to stop) goes second, and Vehicle C (third to stop) goes third.
Each vehicle must yield to any vehicle that arrived and came to a complete stop prior to its own arrival.

Anahtar Kavram

First-come, first-served right-of-way rule at multi-way stop intersections
Tahmini Süre:45s
Soru 122Soru →

A driver traveling on a two-lane, two-way highway intends to pass a slower vehicle ahead. Arrange the following actions in the correct sequential order from first to last to complete the passing maneuver safely and legally.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence is: 1) Check road markings and oncoming traffic, 2) Signal left and check mirrors and blind spots, 3) Move into passing lane, overtake vehicle, and signal right, 4) Check rearview mirror for passed vehicle's headlights before returning to the right lane.
The correct sequence begins by evaluating forward roadway safety and legal pavement markings. Next, the driver signals left and performs mirror and blind spot checks to ensure traffic behind is clear. The driver then moves into the left passing lane, completes the pass legally without speeding, and signals right. Finally, after confirming sufficient separation distance by seeing both headlights of the passed vehicle in the inside rearview mirror, the driver returns smoothly to the right lane.

Adım Adım Çözüm

1
Assess forward road conditions and pavement markings
Verified that passing is legal (e.g., broken yellow line) and that the oncoming lane is free of approaching vehicles.
Passing cannot be safely or legally initiated without clear sight distance and proper road markings.
2
Signal left turn and verify clear rear space
Turned on the left directional indicator and checked rearview mirror, side mirror, and left blind spot.
Communicates intention to surrounding drivers and ensures no vehicle behind is already overtaking.
3
Execute the overtake maneuver
Steered into the left lane, accelerated past the slower vehicle within legal speed limits, and activated the right turn signal.
Completes the pass efficiently and alerts traffic of the return merge.
4
Confirm safe clearance and return to the lane
Observed both headlights of the overtaken vehicle in the inside rearview mirror before steering back into the right lane.
Guarantees a safe distance cushion so the passed vehicle is not cut off.

Anahtar Kavram

Safe Passing Procedure on Two-Lane Roads
Soru 123Soru →

Four vehicles arrive at an intersection controlled by four-way stop signs under different conditions. Place the vehicles in the correct order in which they have the right-of-way to proceed through the intersection legally.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order of proceeding through the intersection is: 1) Emergency ambulance with active siren/lights, 2) Sedan that stopped first among non-emergency vehicles, 3) Pickup truck proceeding straight after simultaneous arrival, 4) Coupe turning left after yielding to oncoming straight traffic.
Right-of-way rules establish a clear hierarchy: active emergency vehicles hold absolute priority first. Next, multi-way stop rules grant precedence to whichever non-emergency vehicle stopped first (the sedan). Finally, when remaining vehicles arrive simultaneously, straight-through traffic (the pickup truck) has precedence over left-turning traffic (the coupe), placing the turning vehicle last.

Adım Adım Çözüm

1
Identify emergency vehicles with active warning devices
The ambulance with active sirens and lights takes absolute precedence over all other vehicles.
State traffic laws mandate yielding right-of-way to active emergency vehicles immediately.
2
Apply the 'first to arrive, first to proceed' rule for standard vehicles
The sedan proceeds next.
At multi-way stop intersections, non-emergency vehicles gain right-of-way in chronological order of arrival.
3
Resolve right-of-way between vehicles arriving simultaneously
The pickup truck going straight proceeds before the left-turning coupe.
Drivers making a left turn must yield to oncoming traffic moving straight through an intersection when arriving at the same time.

Anahtar Kavram

Right-of-Way Hierarchy at Multi-Way Stop Intersections
Tahmini Süre:1m 30s
Soru 124Soru →

Three vehicles arrive at an intersection controlled by four-way stop signs at different times. Arrange the vehicles in the correct order of precedence for proceeding through the intersection, starting with the vehicle that has the right-of-way first.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Vehicle A proceeds first, followed by Vehicle B, and finally Vehicle C.
At an intersection controlled by four-way stop signs, precedence is established strictly by order of arrival. The driver who comes to a complete stop first has the right-of-way to enter the intersection first. Subsequent vehicles proceed in the exact sequence in which they arrived and stopped.

Adım Adım Çözüm

1
Identify the right-of-way rule for a multi-way stop intersection.
Right-of-way is determined by the arrival order at the stop line.
Standard DMV traffic rules specify that drivers proceed through a multi-way stop on a first-come, first-served basis.
2
Sequence the vehicles based on their stopping order.
Vehicle A (first) -> Vehicle B (second) -> Vehicle C (third).
Each driver must yield the right-of-way to any vehicle that arrived and came to a complete stop prior to them.

Anahtar Kavram

First-Come, First-Served Right-of-Way at Multi-Way Stop Intersections
Tahmini Süre:45s
Soru 125Soru →

A motorist driving on a multi-lane city roadway needs to make a right turn at an upcoming intersection where a dedicated bicycle lane runs along the right curb. Place the following operational steps in the correct chronological order from first step to final step.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence for making a right turn across a bicycle lane is: First, check mirrors and the right blind spot for cyclists; Second, activate the right-turn signal at least 100 feet before the intersection; Third, merge into the bicycle lane within 200 feet of the intersection after yielding to bicycle traffic; Fourth, slow down and yield to pedestrians in the crosswalk; Fifth, complete the right turn into the rightmost travel lane.
Executing a safe right turn across a bicycle lane requires a logical sequence of safety and legal checks: first observing hazards in blind spots, next giving proper advance signal warning, then positioning the vehicle legally into the bike lane (yielding to cyclists), subsequently yielding to pedestrians, and finally completing the maneuver in the correct lane.

Adım Adım Çözüm

1
Perform hazard scan and shoulder check
Driver establishes situational awareness and confirms the right blind spot and bicycle lane are clear of approaching cyclists.
Scanning before signaling or maneuvering prevents sudden actions that could endanger cyclists traveling straight along the right side of the vehicle.
2
Signal intention continuously
Turn signal is activated at least 100 feet before reaching the intersection.
Traffic laws mandate continuous signaling for a minimum distance (typically 100 feet) to give trailing and oncoming drivers clear warning.
3
Position vehicle into the bike lane safely
Vehicle merges into the designated bicycle lane within the allowable 200-foot zone prior to the turn, yielding to any cyclists already present.
Merging into the bike lane before turning prevents dangerous 'right-hook' collisions where a vehicle turns across an active cyclist's path.
4
Decelerate and yield right-of-way at crosswalk
Vehicle slows down to turn speed and waits for pedestrians to clear the crosswalk of the target street.
Pedestrians in crosswalks maintain legal right-of-way over turning motor vehicles.
5
Execute and complete turning maneuver
Vehicle turns smoothly into the rightmost destination lane.
Standard traffic regulations mandate finishing right turns in the lane nearest to the right-hand curb unless markings direct otherwise.

Anahtar Kavram

Proper sequencing for right turns across bicycle lanes, including shoulder checks, advance signaling, lane positioning, and right-of-way yielding.
Soru 126Soru →

Four vehicles approach a four-way intersection where the traffic signals have completely failed due to a power outage, requiring all drivers to treat the intersection as a four-way stop. The arrival times and intended directions are as follows:

• Northbound Vehicle 1: Arrived first and came to a complete stop, intending to make a right turn.
• Southbound Vehicle 2: Arrived second, intending to turn left.
• Westbound Vehicle 3: Arrived second at the exact same time as Southbound Vehicle 2, intending to proceed straight.
• Eastbound Vehicle 4: Arrived last after the other three vehicles had already stopped.

In what order must these vehicles proceed through the intersection to adhere to official right-of-way rules?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order of movement through the intersection is Northbound Vehicle 1 first, Westbound Vehicle 3 second, Southbound Vehicle 2 third, and Eastbound Vehicle 4 fourth.
At an intersection with failed traffic signals, all-way stop rules apply. The first vehicle to arrive and stop (Northbound Vehicle 1) proceeds first. When two vehicles arrive simultaneously (Southbound Vehicle 2 and Westbound Vehicle 3), the driver on the left must yield to the driver on the right, giving Westbound Vehicle 3 precedence over Southbound Vehicle 2. Vehicles that arrive after others are already stopped (Eastbound Vehicle 4) proceed last.

Adım Adım Çözüm

1
Determine primary right-of-way based on arrival sequence
Northbound Vehicle 1 proceeds first.
When traffic signals fail, drivers must treat the intersection as an all-way stop. The first vehicle to reach and stop at the intersection line has the right-of-way.
2
Apply the yield-to-the-right rule for simultaneous arrival
Westbound Vehicle 3 proceeds second.
Southbound Vehicle 2 and Westbound Vehicle 3 arrived at the exact same time. At an all-way stop, when two vehicles arrive simultaneously, the driver on the left (Southbound Vehicle 2) must yield to the driver on their right (Westbound Vehicle 3).
3
Clear the next established vehicle in sequence
Southbound Vehicle 2 proceeds third.
After yielding to the vehicle on its right, Southbound Vehicle 2 is established next in sequence ahead of vehicles that arrived later.
4
Allow the last arriving vehicle to proceed
Eastbound Vehicle 4 proceeds fourth.
As the last vehicle to reach the intersection, Vehicle 4 must yield to all vehicles that were already stopped before its arrival.

Anahtar Kavram

Right-of-way precedence at inoperative signalized intersections treated as four-way stops
Soru 127Soru →

When completing a pass of a slower vehicle on a two-lane highway, in what correct sequential order should a driver perform the following steps to safely return to the right lane?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence for returning to the lane after passing is: first, wait until the passed vehicle's headlights appear in the interior rearview mirror; second, turn on the right-turn signal; third, check the right mirror and right shoulder blind spot; fourth, steer smoothly into the right lane and cancel the signal.
Returning safely to the original lane after passing requires first establishing adequate forward clearance by seeing the passed vehicle's headlights in the interior rearview mirror. Next, the driver must signal intent, perform visual mirror and blind spot checks, and finally steer back into the lane smoothly.

Adım Adım Çözüm

1
Observe the interior rearview mirror until the headlights of the passed vehicle appear.
Establishes a safe cushion of space ahead of the passed vehicle.
Cutting back into the lane too early creates an unsafe tailgating hazard for the overtaken vehicle.
2
Turn on the right-turn signal.
Notifies other drivers of your intended lane change movement.
Communication via turn signals is legally required before changing positions.
3
Check the right side mirror and glance over your right shoulder.
Verifies the blind spot on the right side of the vehicle is clear.
Mirrors alone do not eliminate blind spots.
4
Guide the vehicle back into the right lane and turn off the signal.
Safely completes the re-entry process.
Maintains proper lane positioning and clears the active signal.

Anahtar Kavram

Re-entry procedure after passing on a two-lane road
Tahmini Süre:45s
Soru 128Soru →

Three vehicles approach an uncontrolled T-intersection at the same time. Place the vehicles in the correct order in which they have the right-of-way to proceed through the intersection (from first to last).

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct order of precedence is: first, the vehicle traveling straight along the through street; second, the vehicle on the through street turning left; and third, the vehicle on the terminating street turning right.
At an uncontrolled T-intersection, traffic traveling on the through street has absolute right-of-way over traffic on the terminating road. On the through street itself, a vehicle moving straight has priority over a vehicle turning left. Therefore, the straight through-vehicle goes first, the left-turning through-vehicle goes second after yielding to oncoming traffic, and the vehicle on the terminating road proceeds last.

Adım Adım Çözüm

1
Determine priority between the through street and the terminating street.
Vehicles on the through street always have right-of-way priority over vehicles on the terminating road.
Standard right-of-way laws require drivers on a road that ends (T-intersection) to yield to all traffic on the continuing road.
2
Determine priority among vehicles on the through street.
The vehicle traveling straight goes before the vehicle making a left turn.
Drivers turning left across an oncoming lane must yield to vehicles approaching from the opposite direction going straight.
3
Assign final right-of-way sequence.
The straight vehicle on the through road proceeds first, followed by the left-turning vehicle on the through road, and finally the vehicle entering from the terminating road.
This yields a complete safe order of movement adhering to state DMV standards.

Anahtar Kavram

Right-of-Way Rules at Uncontrolled T-Intersections
Soru 129Soru →

What is the correct sequential order of steps a driver must follow to safely execute a lane change to the left on a multi-lane highway?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The proper sequence for changing lanes begins with checking mirrors, signaling intent, checking the blind spot over the shoulder, steering smoothly into the lane while maintaining speed, and finally turning off the signal.
Executing a safe lane change requires early observation via mirrors, communicating intent with turn signals, verifying blind spots with a direct head turn, making a smooth lateral transition at speed, and ending communication by canceling the signal.

Adım Adım Çözüm

1
Check rearview and side mirrors
Assesses overall traffic conditions and identifies nearby vehicles.
Before signaling or turning, a driver must confirm basic traffic flow is clear.
2
Activate the left turn signal
Warns surrounding motorists of the upcoming maneuver.
Communication must occur in advance of the actual vehicle movement.
3
Check the left blind spot over the shoulder
Ensures no vehicle is hidden in areas not visible in mirrors.
Mirrors leave blind spots that can only be verified by looking directly over the shoulder.
4
Steer into the destination lane while keeping speed steady
Completes the physical transition between lanes safely.
Abrupt slowing during a lane change creates a collision hazard with trailing vehicles.
5
Cancel the turn signal
Prevents ongoing misleading signals to other traffic.
Leaving signals on after completing the maneuver causes confusion.

Anahtar Kavram

Standard Safe Lane Change Procedure
Soru 130Soru →

You are driving on a city roadway and planning to make a standard left turn at an upcoming intersection. In what chronological order should you execute these procedural steps from first to last?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The proper sequence is to first check traffic in your mirrors, then activate your left turn signal at least 100 feet in advance, move into the designated left lane, and finally yield to oncoming traffic and pedestrians before executing the turn.
The correct procedural order requires establishing visual awareness first by checking mirrors, communicating intent by signaling at least 100 feet prior, establishing correct lane position in the left-turn lane, and yielding to oncoming traffic and pedestrians right before executing the turn.

Adım Adım Çözüm

1
Check traffic mirrors and blind spots
Driver gains situational awareness around the vehicle
You must confirm surrounding space is safe before indicating a maneuver or shifting lanes.
2
Activate the left turn signal
Surrounding road users are alerted to your intention
State laws mandate signaling continuously for at least 100 feet prior to turning.
3
Position vehicle in the proper turning lane
Vehicle enters the leftmost available lane or turn pocket safely
Turns must be initiated from the correct lane designated for that maneuver.
4
Yield and execute the turn safely
Vehicle completes the turn without conflicting with right-of-way traffic
Oncoming traffic and pedestrians in crosswalks have right-of-way over turning vehicles.

Anahtar Kavram

Standard Safe Turning Procedure and Signaling Sequence
Soru 131Soru →

When preparing to execute a left turn from a two-way street onto a multi-lane roadway at a signalized intersection without a dedicated green turn arrow, a driver must execute a sequence of actions. In what order should the driver perform the following procedural steps, from first to last?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct procedural sequence is: 1) Activate the left turn signal continuously at least 100 feet before reaching the intersection; 2) Position the vehicle smoothly in the designated left-turn lane or closest to the center line; 3) Decelerate and yield the right-of-way to oncoming straight-through vehicles and crossing pedestrians; 4) Steer into the left-most lane traveling in the intended direction of the target roadway; 5) Cancel the turn signal indicator and accelerate smoothly to match traffic speed.
The correct procedural order requires signaling intent at least 100 feet ahead of time, moving into the appropriate left-turn lane, yielding right-of-way to oncoming traffic and crosswalk users at the intersection, steering into the left-most lane of the target roadway, and finally deactivating the turn signal while bringing the vehicle up to traffic speed.

Adım Adım Çözüm

1
Signal driver intent early
Activate turn indicator at least 100 feet prior to the intersection.
Traffic law specifies signaling intent before initiating lateral maneuvers or speed changes to give adequate notice to trailing traffic.
2
Establish turning position
Guide the vehicle into the left-turn pocket or lane closest to the road center line.
Proper lane positioning prevents blocking non-turning traffic and sets up the correct entry path.
3
Evaluate right-of-way
Slow down and yield to oncoming vehicles proceeding straight and pedestrians in the crosswalk.
Unprotected left turns require yielding to all conflicting oncoming traffic and crosswalk traffic before entering the path of travel.
4
Execute lane-constrained turning arc
Complete the turn maneuver into the innermost (left-most) available lane of the destination roadway.
Standard DMV rules prohibit cutting across lanes during a turn; drivers must enter the corresponding lane closest to the median.
5
Post-turn stabilization
Turn off the signal light and accelerate to surrounding traffic speed.
Deactivating the signal prevents miscommunication with downstream traffic once the turn maneuver is finished.

Anahtar Kavram

Sequential execution of left-turn procedures, lane positioning, and right-of-way yielding
Soru 132Soru →

You are approaching an active highway work zone where traffic flow is restricted to a single lane and controlled by a human flagger using a STOP/SLOW paddle. Arrange the following driver actions in the correct chronological order from first to last to safely navigate the controlled area.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence is: (1) Scan ahead and begin reducing speed well before the flagger; (2) Bring the vehicle to a complete stop while the STOP paddle is displayed; (3) Remain stopped until the flagger displays SLOW and signals to move; and (4) Drive cautiously through the single-lane work zone.
The correct order requires early speed reduction upon recognizing work zone advance warnings, stopping completely when the STOP paddle is presented, maintaining position until both the SLOW paddle and explicit hand signals are given, and finally proceeding through the work zone at a safe, reduced speed.

Adım Adım Çözüm

1
Identify work zone warnings and reduce speed early.
Vehicle approaches the flagger at a safe, controlled speed.
Allows adequate stopping distance and time to observe flagger instructions.
2
Stop completely before the flagger's position when STOP paddle is shown.
Vehicle comes to a full stop without encroaching on the work area.
Compliance with flagger authority prevents entering occupied or single-lane travel space.
3
Wait for positive signal (SLOW paddle and hand gesture).
Driver verifies the opposite direction is clear.
Flaggers alternate traffic flow; proceeding early risks head-on collision.
4
Proceed cautiously at posted work zone speed.
Vehicle safely navigates past workers and equipment.
Maintains work zone safety until clear of temporary restrictions.

Anahtar Kavram

Work Zone Flagger Traffic Control and Right-of-Way Compliance
Tahmini Süre:2m 0s
Soru 133Soru →

Three vehicles approach a four-way stop intersection at different times. Place the vehicles in the correct order in which they should proceed through the intersection, from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The vehicles should proceed in order of arrival: Vehicle A first, followed by Vehicle B, and finally Vehicle C.
At a four-way stop sign, right-of-way is established by arrival order. The driver who comes to a complete stop first is entitled to proceed first, followed by subsequent drivers in the order of their arrival.

Adım Adım Çözüm

1
Identify the primary right-of-way rule for four-way stop intersections.
Right-of-way at a four-way stop follows the first-in, first-out rule based on arrival time.
Traffic law dictates that drivers must yield to vehicles that have already stopped at the intersection prior to their arrival.
2
Determine the sequence based on arrival order.
Vehicle A stops first, Vehicle B stops second, and Vehicle C stops third.
Sequencing follows exact arrival order.

Anahtar Kavram

Four-Way Stop First-Come First-Served Rule
Tahmini Süre:45s
Soru 134Soru →

An active ambulance with flashing lights and siren activated approaches a four-way stop intersection. At the same time, Vehicle A (which arrived at the intersection first) is waiting to proceed straight, and Vehicle B (which arrived second) is waiting to make a left turn. In what order must these vehicles proceed through the intersection safely?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence of movement is: first the Ambulance with active lights and sirens, second Vehicle A, and third Vehicle B.
Emergency vehicles displaying active flashing lights and sounding a siren override standard intersection controls and always have top right-of-way priority. Once the intersection is clear of emergency traffic, standard four-way stop arrival rules determine precedence, meaning Vehicle A (first arrival) proceeds before Vehicle B (second arrival).

Adım Adım Çözüm

1
Identify top-priority traffic (Emergency Vehicles)
The active emergency ambulance proceeds first.
State traffic laws mandate that all vehicles yield immediate right-of-way to emergency vehicles operating sirens and visual flashing lights.
2
Apply multi-way stop sign rules to remaining vehicles
Vehicle A proceeds second, followed by Vehicle B.
Under standard four-way stop rules, vehicles proceed in the order they arrived ('first to arrive, first to proceed'). Vehicle A arrived before Vehicle B.

Anahtar Kavram

Right-of-Way Precedence involving Emergency Vehicles and Multi-Way Stop Arrival Sequence
Soru 135Soru →

When overtaking a slower vehicle on a two-lane highway, a driver must execute a precise sequence of safety checks and driving maneuvers. What is the correct sequential order of steps from start to finish?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins by evaluating the forward road conditions, followed by checking mirrors and left blind spot, signaling and accelerating into the passing lane, waiting until both headlights of the passed vehicle appear in the interior rear-view mirror, and finally signaling, checking the right blind spot, and returning to the right lane.
The correct sequence prioritizes forward risk assessment first, rearward spatial checks second, active lane changing third, safe distance confirmation fourth, and final lane re-entry fifth.

Adım Adım Çözüm

1
Scan road ahead for road markings and oncoming traffic
Confirms passing zone legality and safe clearance distance ahead
Passing cannot proceed if pavement markings prohibit it or oncoming traffic is present.
2
Check rearview/side mirrors and glance over left shoulder
Confirms left blind spot is clear of trailing traffic
Prevents collision with vehicles behind that may already be attempting to pass.
3
Signal left turn, shift into opposing lane, and accelerate smoothly
Initiates the overtaking maneuver safely
Clear communication and decisive movement minimize time spent in the opposing lane.
4
Monitor interior rear-view mirror until both headlights of the overtaken vehicle appear
Establishes proper clearance distance ahead of the passed vehicle
Prevents cutting off the overtaken driver or clipping their front bumper.
5
Signal right turn, check right blind spot, and return to right lane
Completes the pass and restores original lane position
Ensures no hazards remain in the right lane before merging back.

Anahtar Kavram

Two-Lane Highway Overtaking and Re-entry Sequence
Soru 136Soru →

You are driving on a multi-lane road and intend to make a left turn using a dedicated center two-way left-turn lane (TWLTL). What is the correct chronological sequence of steps required to execute this maneuver safely and legally?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The proper sequence to make a left turn using a center two-way left-turn lane is: 1) Check mirrors and blind spot, 2) Activate left turn signal at least 100 feet before entering the turn lane, 3) Smoothly merge into the center turn lane, 4) Yield right-of-way to oncoming vehicles and pedestrians, and 5) Complete the turn into the cross street when clear.
The correct order follows established defensive driving principles and legal turning rules: first scanning blind spots, then signaling intent at least 100 feet prior, transitioning smoothly into the designated turn lane, yielding to oncoming traffic, and finally proceeding through the intersection when clear.

Adım Adım Çözüm

1
Scan mirrors and check left blind spot.
Confirms the center turn lane is unoccupied by other vehicles.
Always assess traffic conditions visually prior to initiating any lateral vehicle position changes.
2
Engage the left turn signal at least 100 feet in advance.
Communicates turning intent to traffic behind and ahead.
Traffic safety regulations require continuous signaling prior to changing lanes or turning.
3
Steer into the center two-way left-turn lane while decelerating.
Clears the through-traffic lane while positioning the vehicle for the turn.
Center turn lanes exist to remove turning vehicles from moving traffic streams without being used as extended travel lanes.
4
Yield right-of-way while stationary or moving at low speed within the center lane.
Prevents collisions with approaching opposing vehicles.
Drivers making left turns across oncoming lanes must yield to all approaching traffic close enough to constitute an immediate hazard.
5
Steer cleanly through the turn into the appropriate lane of the intersecting roadway.
Completes the maneuver safely.
Final entry into the target roadway completes the turning procedure.

Anahtar Kavram

Center Two-Way Left-Turn Lane Execution and Yielding Sequence
Soru 137Soru →

Place the following steps in the correct chronological order for a driver planning to execute a safe lane change to the left.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The proper sequence for changing lanes safely is: first, check the rearview and side mirrors; second, activate the turn signal; third, perform a over-the-shoulder head check to clear the blind spot; fourth, smoothly complete the lane change.
Safe lane-changing procedure requires checking mirrors first to gain general spatial awareness, signaling to inform other drivers, conducting a physical head check over the shoulder to inspect blind spots, and finally moving into the lane.

Adım Adım Çözüm

1
Check rearview and left side mirrors
Assesses overall traffic conditions behind and beside the vehicle
Establishes initial situational awareness prior to signaling
2
Turn on the left turn signal
Alerts other road users of planned movement
Communicates driver intent early to give surrounding traffic time to react
3
Look over the left shoulder (chin-to-shoulder head check)
Verifies that no vehicle, motorcycle, or bicyclist is hidden in the blind spot
Side and rearview mirrors leave adjacent zones unmonitored
4
Steer smoothly into the new lane
Completes the lane change safely
Executed only after confirming space is completely clear

Anahtar Kavram

Sequential lane change procedure requiring physical blind spot checks
Tahmini Süre:45s
Soru 138Soru →

A driver is preparing to execute a right turn at a street intersection. Place the following operational steps in the correct chronological order from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct procedural order is: 1) Activate the right-turn signal at least 100 feet in advance, 2) Check mirrors and scan right blind spots, 3) Position the vehicle in the far-right lane, 4) Yield right-of-way to crosswalk pedestrians, and 5) Complete the turn into the rightmost lane.
Safe driving rules require drivers to signal intention at least 100 feet prior to turning, scan mirrors and blind spots for pedestrians and cyclists, position the vehicle into the rightmost lane edge, yield to pedestrians crossing the street, and complete the turn into the rightmost lane.

Adım Adım Çözüm

1
Signal intention early
Turn signal is activated at least 100 feet prior to the turn.
Early signaling warns behind and oncoming traffic before speed or lane changes occur.
2
Check surroundings and blind spots
Mirrors and shoulder blind spots are verified clear of cyclists and pedestrians.
Scanning protects vulnerable road users traveling along the curb.
3
Position vehicle in roadway
Vehicle enters the far-right lane close to the right curb line.
Proper lane positioning blocks vehicle cutting on the right side.
4
Yield right-of-way
Vehicle slows down to yield to pedestrians in the crosswalk.
Pedestrians maintain legal right-of-way at crosswalks.
5
Execute the turn
Turn is completed entering the rightmost lane of the cross street.
Turning into the closest destination lane establishes safe traffic alignment.

Anahtar Kavram

Sequential procedural steps for safe turning and signaling execution
Soru 139Soru →

A driver on a two-lane rural road has successfully moved into the oncoming lane to overtake a slow-moving vehicle. In what order should the driver execute the following steps to safely return to the right lane?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The proper sequence to return safely to the right lane is: first, maintain speed until both headlights of the passed vehicle are visible in the inside rearview mirror; second, activate the right turn signal; third, check the right blind spot over the shoulder; fourth, steer smoothly into the right lane; and fifth, cancel the turn signal once established in the lane.
Safely returning to the right lane after completing a pass requires establishing adequate clearance by observing both headlights of the passed vehicle in the inside rearview mirror, signaling the intent to return, checking the right shoulder blind spot, steering smoothly into the lane, and deactivating the turn signal.

Adım Adım Çözüm

1
Check the inside rearview mirror until both headlights of the overtaken vehicle are visible.
Verifies that sufficient clearance exists ahead of the passed vehicle.
Re-entering the lane too early cuts off the other driver and creates a collision hazard.
2
Turn on the right turn signal.
Communicates the intended lane change to other traffic.
Drivers are required to signal prior to initiating any lateral movement.
3
Look over the right shoulder into the blind spot.
Confirms the adjacent space is clear.
Rearview and side mirrors do not cover all angles directly adjacent to the vehicle.
4
Steer smoothly into the right lane.
Returns the vehicle to its original travel lane.
Smooth steering maintains vehicle control and predictability.
5
Turn off the right turn signal.
Ends the lane-change communication.
Leaving an indicator on misinforms other road users of future intentions.

Anahtar Kavram

Safe procedure for returning to the travel lane after passing
Soru 140Soru →

You are driving on a two-lane undivided roadway when an emergency vehicle with active sirens and flashing lights approaches from the oncoming direction. Arrange the following driver actions in the correct chronological order from first to last to yield the right-of-way safely and legally.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence of actions is: (1) Scan traffic and signal your intention to move toward the right edge of the roadway; (2) Steer smoothly to a position parallel to, and as close as practical to, the right curb or edge of the road; (3) Bring your vehicle to a complete stop clear of any intersection and remain stopped until the oncoming emergency vehicle passes; (4) Check your mirrors and blind spots, signal, and safely merge back into the travel lane.
When an emergency vehicle approaches with active siren and lights on a two-lane undivided road, traffic in both directions must pull over to the right edge and stop. The proper sequence requires communicating intent first by signaling, steering to the right edge, coming to a complete stop clear of intersections, and finally checking blind spots before merging back into traffic after the vehicle passes.

Adım Adım Çözüm

1
Identify the approaching emergency vehicle and signal intent to pull over.
Surrounding traffic is alerted to your intended lateral movement while you assess right-side roadway space.
Signaling before altering vehicle position prevents rear-end collisions and alerts following drivers.
2
Guide the vehicle to the right edge or shoulder.
The vehicle is positioned parallel and close to the right curb.
Move Over and emergency yield laws require pulling as far right as practical on undivided roads.
3
Decelerate to a complete stop clear of intersections.
The vehicle remains completely stationary while the oncoming emergency vehicle passes.
Stopping completely prevents accidental entry into the path of an emergency vehicle that may need to cross the center line.
4
Verify clear roadway conditions, signal, and accelerate back into traffic.
The driver safely re-enters the active travel lane.
Drivers must verify that no trailing emergency vehicles are following before pulling back into the roadway.

Anahtar Kavram

Yielding Right-of-Way to Oncoming Emergency Vehicles on Undivided Roads
Tahmini Süre:1m 30s
ÖncekiSayfa 7 / 9Sonraki
Tüm alıştırma soruları — DMV Permit Practice Test | Examkin