Examkin

Traffic Signs, Signals, and Road Markings

482 soru

Tüm türler482Çoktan seçmeli234Doğru / Yanlış211Eşleştirme37
Soru 321Soru →

When waiting at a signal-controlled intersection equipped with painted bicycle detector pavement markings, a bicyclist should position their bicycle tires directly over the detector stencil to activate the traffic signal.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. Positioning a bicycle directly over the designated bicycle detector pavement marking ensures the intersection sensors detect the rider and cycle the traffic light to green.
The statement is true because bicycle detector pavement markings (typically a bicycle symbol with directional lines) designate the precise area on the pavement where traffic sensors are calibrated to detect bicycles. Aligning bicycle wheels directly over the stencil ensures the automated signal system detects the waiting cyclist.

Adım Adım Çözüm

1
Identify the function of bicycle detector pavement markings at traffic intersections.
Recognize that these stencils mark the location of underground sensors designed to detect non-motorized traffic.
Because bicycles contain significantly less metal than motor vehicles, standard induction loops require precise vehicle alignment to detect them.
2
Determine the proper rider action when approaching a signalized intersection with these markings.
Confirm that stopping directly on top of the stencil activates the signal controller.
Correct positioning over the sensor triggers the signal logic to grant a green light phase to the cyclist.

Anahtar Kavram

Bicycle Detector Pavement Markings and Signal Actuation
Soru 322Soru →

When approaching an intersection where all traffic control signal lights are completely dark due to a power outage, a driver is legally required to treat the intersection as an all-way stop.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. An intersection with a completely dark or unlit traffic light due to a power outage must be treated as an all-way stop.
Under traffic safety laws, an intersection with non-functioning, unlit traffic signals operates as an all-way stop. Drivers on all approaching lanes must come to a complete stop prior to entering the intersection and yield right-of-way in accordance with standard four-way stop rules.

Adım Adım Çözüm

1
Identify the status of the traffic signal lights
The traffic light signals are completely dark and non-operational due to a power outage.
Traffic regulations specify emergency fallback procedures when electrical signals fail completely.
2
Apply the statutory rule for dark traffic signals
Treat the intersection as an all-way stop.
When signals are unlit, every approach converts legally into a stop-sign controlled intersection.
3
Execute the stop and right-of-way procedure
Bring the vehicle to a complete stop, yield to vehicles that stopped first or to the vehicle on the right if arriving simultaneously, then proceed safely.
Maintains orderly intersection navigation and prevents broadside collisions.

Anahtar Kavram

Unlit Traffic Signal Protocol (Power Outage)
Tahmini Süre:45s
Soru 323Soru →

On a two-lane highway, what does a solid yellow pavement marking on your side of the center line indicate?

Cevabı ve açıklamayı göster

Cevap: Passing other vehicles is strictly prohibited from your lane.

Cevap

Passing other vehicles is strictly prohibited from your lane.
A solid yellow line on your side of the center road marking indicates a no-passing zone, meaning drivers traveling in that direction are legally prohibited from crossing the line to pass another vehicle.

Adım Adım Çözüm

1
Identify the type and color of the pavement marking on your side of the center line.
The marking is a solid yellow line on the driver's side.
Yellow center lines separate traffic traveling in opposite directions, while solid lines indicate restrictions.
2
Apply standard traffic law rules for solid pavement line markings.
A solid line on your side creates a no-passing zone for your direction of travel.
Drivers must not cross a solid yellow line to overtake or pass other vehicles.

Anahtar Kavram

Solid Centerline Passing Restrictions
Soru 324Soru →

A driver approaches an intersection in a dedicated turn lane and sees a flashing yellow arrow signal. Which action is the driver legally required to take before turning left?

Cevabı ve açıklamayı göster

Cevap: Proceed with the left turn cautiously after yielding to oncoming traffic and pedestrians.

Cevap

Proceed with the left turn cautiously after yielding to oncoming traffic and pedestrians.
A flashing yellow arrow signal indicates an unprotected left turn. Drivers in the turn lane are permitted to complete their turn, but they must first yield the right-of-way to all oncoming traffic and any pedestrians crossing the street.

Adım Adım Çözüm

1
Identify the traffic signal display
Recognize the signal as a flashing yellow arrow.
Traffic signal shapes and flashing states determine legal right-of-way obligations.
2
Apply legal right-of-way rule for flashing yellow arrows
Determine that left turns are permitted but unprotected.
Flashing yellow arrows mean left turns are allowed, but turning traffic must yield to oncoming traffic and pedestrians in the crosswalk.

Anahtar Kavram

Flashing Yellow Arrow Signals
Tahmini Süre:45s
Soru 325Soru →

You are approaching an intersection in a dedicated left-turn lane and observe a flashing yellow arrow traffic signal. Oncoming traffic facing you has a steady green signal. Which of the following actions is legally required of you before completing the left turn?

Cevabı ve açıklamayı göster

Cevap: Yield the right-of-way to oncoming traffic and pedestrians, then complete the turn when clear.

Cevap

Yield the right-of-way to oncoming traffic and pedestrians, then complete the turn when clear.
A flashing yellow arrow signal indicates an unprotected left turn. Drivers facing this signal are allowed to make a left turn, but they must first yield the right-of-way to oncoming traffic and pedestrians. Once the intersection is clear, the driver may complete the turn safely.

Adım Adım Çözüm

1
Identify the signal type and legal meaning.
A flashing yellow arrow indicates a permitted (unprotected) left turn.
Unlike a steady green arrow, a flashing yellow arrow does not stop oncoming traffic.
2
Assess right-of-way obligations.
Oncoming motor vehicles and pedestrians in crosswalks have right-of-way priority.
Traffic laws mandate yielding to all conflicting traffic before proceeding across oncoming lanes.
3
Execute the maneuver safely.
Proceed through the turn once a safe gap in traffic occurs.
The driver may turn as soon as it is safe to do so without requiring a complete stop if traffic is clear.

Anahtar Kavram

Flashing Yellow Left-Turn Arrow Obligations
Soru 326Soru →

When approaching a pedestrian hybrid beacon (HAWK signal) with completely unlit (dark) signal heads, drivers are legally required to come to a complete stop before entering the crosswalk.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is false. An unlit pedestrian hybrid beacon is inactive, so drivers may proceed without stopping as long as the crosswalk is clear.
The statement is false because the default inactive state of a pedestrian hybrid beacon is completely dark. Drivers do not need to stop when approaching an unlit beacon unless a pedestrian is actively in the crosswalk.

Adım Adım Çözüm

1
Identify the signal type and its visual status.
The signal is a pedestrian hybrid beacon (HAWK signal) and all lights are completely dark (inactive).
Pedestrian hybrid beacons operate differently from standard automated traffic signals.
2
Apply the traffic rule for dark pedestrian hybrid beacons.
Confirm that an unlit beacon allows drivers to proceed through the zone at normal speed without stopping unless pedestrians are crossing.
The dark state is the default resting state of the beacon when no pedestrian has pressed the push button.

Anahtar Kavram

Pedestrian Hybrid Beacon Signal States
Soru 327Soru →

You are driving on an arterial street and approaching a crosswalk controlled by a Pedestrian Hybrid Beacon (HAWK signal). The signal sequence has just changed from solid red to alternating flashing red lights. A pedestrian who activated the beacon has completely crossed your lane and is walking away on the opposite side of the roadway. What is your legal obligation at this moment?

Cevabı ve açıklamayı göster

Cevap: Come to a complete stop at the stop line, yield to any remaining pedestrians, and then proceed if your lane and crosswalk path are clear.

Cevap

Drivers must come to a complete stop at the stop line for alternating flashing red lights on a Pedestrian Hybrid Beacon, yield to any pedestrians in the roadway, and may then proceed if the crosswalk is clear.
During the alternating flashing red phase of a Pedestrian Hybrid Beacon, drivers are legally required to bring their vehicle to a complete stop. Once stopped, drivers must yield to any pedestrians remaining in the crosswalk. If the crosswalk and immediate path of travel are completely clear, drivers may proceed cautious through the zone, even while the red lights continue to flash.

Adım Adım Çözüm

1
Identify the active phase of the Pedestrian Hybrid Beacon.
The signal phase is alternating flashing red lights following the solid red phase.
Different phases (flashing yellow, solid yellow, solid red, flashing red, dark) convey distinct legal obligations under traffic code.
2
Apply the rule governing a flashing red signal phase on a pedestrian hybrid beacon.
Drivers must treat alternating flashing red beacon lights like a stop sign.
The rule mandates a full stop, followed by checking and yielding to pedestrians in or approaching the crosswalk.
3
Evaluate the traffic and pedestrian scenario.
The pedestrian has cleared the driver's lane and is walking away on the far side of the road.
Since a complete stop was made and no pedestrians remain in or near the vehicle's path, the driver is legally permitted to proceed before the beacon turns dark.

Anahtar Kavram

Pedestrian Hybrid Beacon (HAWK Signal) Light Sequences and Legal Driver Duties
Soru 328Soru →

A yellow diamond-shaped road sign displaying a symbol of a traffic signal with red, yellow, and green circles serves as an advance warning that drivers are approaching a signal-controlled intersection and should be prepared to slow down or stop.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

The statement is True. A yellow diamond 'Signal Ahead' sign warns drivers in advance that an intersection controlled by traffic light signals is ahead so they can adjust speed safely.
The statement accurately defines the meaning and required driver response for the MUTCD 'Signal Ahead' warning sign. Yellow diamond signs provide advance notification of road features, such as upcoming traffic lights, so drivers can anticipate stopping.

Adım Adım Çözüm

1
Identify the sign color and shape classification.
Yellow diamond-shaped signs indicate warning conditions and upcoming hazards on the roadway.
Standard MUTCD design guidelines reserve yellow diamond sign faces for warning drivers about unexpected conditions ahead.
2
Interpret the symbol shown on the sign face.
The visual depiction of red, yellow, and green circular lights represents a standard traffic control signal.
Symbolic sign design provides clear visual information across language barriers.
3
Determine appropriate driver action.
Drivers should scan ahead for the intersection, reduce speed if needed, and prepare to stop if the light is red or changing to yellow.
Advance warning signs give drivers sufficient distance and time to react safely to upcoming traffic controls.

Anahtar Kavram

Signal Ahead Warning Sign Recognition
Tahmini Süre:45s
Soru 329Soru →

Yield line pavement markings, which consist of a row of solid white triangles painted transversely across a travel lane pointing toward approaching traffic, legally mandate that a driver come to a complete stop before the line regardless of whether conflicting traffic or pedestrians are present.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Yield line pavement markings specify the point where drivers must yield right-of-way, requiring a stop only when necessary to yield to pedestrians or conflicting traffic.
Yield line pavement markings indicate where a vehicle must yield right-of-way to traffic or pedestrians. Because a complete stop is only required when necessary to yield, the claim that a stop is mandatory regardless of traffic conditions is false.

Adım Adım Çözüm

1
Identify the pavement marking described in the statement
The marking consists of solid white triangles painted transversely across a lane pointing toward approaching traffic, known as a yield line or 'shark's teeth'.
Properly identifying the marking type is required to determine the applicable traffic rule.
2
Determine the legal obligation imposed by yield line pavement markings
Yield lines designate the legal boundary at which drivers must yield right-of-way to approaching or cross-crossing traffic and pedestrians.
Understanding statutory driver responsibilities associated with transverse pavement markings.
3
Evaluate whether stopping is mandatory under all conditions
Unlike a stop line (limit line), stopping at a yield line is conditional; if no conflicting traffic or pedestrians are present, the driver may proceed without stopping.
Distinguishing between conditional yield obligations and mandatory stop requirements.

Anahtar Kavram

Yield Line Pavement Markings and Right-of-Way Rules
Soru 330Soru →

Drivers of passenger vehicles experiencing non-emergency brake overheating on a steep mountain downgrade are legally permitted to pull into and park inside a designated runaway truck ramp to let their brakes cool.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Designated runaway truck ramps are strictly reserved for emergency stopping by out-of-control vehicles experiencing brake failure, and parking or stopping in them for routine cooling is prohibited.
Runaway truck ramps are designated emergency escape areas designed solely to stop out-of-control vehicles that have lost braking capacity on steep downgrades. Parking or stopping a vehicle in these ramps for non-emergency brake cooling is prohibited by traffic laws because it blocks the ramp for vehicles unable to stop.

Adım Adım Çözüm

1
Identify the function of the special zone sign and roadway marking for runaway truck ramps.
Runaway truck ramps are special emergency infrastructure designed to safely stop runaway, out-of-control vehicles using sand, gravel, or an upgrade grade.
Understanding the designated legal purpose of special zone signs prevents dangerous misuse.
2
Evaluate the legality of non-emergency stopping or parking in a runaway truck ramp.
Stopping or parking in a runaway truck ramp for non-emergency reasons such as brake cooling, resting, or checking navigation is illegal.
An obstructed runaway ramp leaves an out-of-control vehicle with no safe emergency stopping area, resulting in severe collision risks.

Anahtar Kavram

Runaway Truck Ramp Usage and Legal Restrictions
Tahmini Süre:45s
Soru 331Soru →

A row of solid white triangles painted across a traffic lane, with the points facing toward approaching vehicles, indicates that drivers must yield the right-of-way.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. A row of solid white triangles facing approaching vehicles indicates that drivers must yield the right-of-way.
The statement is true because solid white triangles pointing toward approaching traffic are legally designated yield lines, marking where drivers must yield or stop.

Adım Adım Çözüm

1
Identify the visual appearance and orientation of the pavement marking.
The marking consists of solid white triangles pointing toward oncoming vehicles.
This specific design is the standardized symbol for a yield line on roadway pavements.
2
Determine the legal requirement associated with yield lines.
Drivers must yield the right-of-way to pedestrians and crossing traffic before proceeding beyond the line.
Yield lines denote the exact position where a vehicle must stop or slow down to grant right-of-way.

Anahtar Kavram

Yield Line Pavement Markings
Tahmini Süre:30s
Soru 332Soru →

You are driving on a multi-lane roadway and approaching a pedestrian hybrid beacon (HAWK signal) that has transitioned to displaying dual flashing red lights. Pedestrians have just stepped onto the curb and completely cleared your side of the roadway. Which of the following actions is legally required?

Cevabı ve açıklamayı göster

Cevap: Bring your vehicle to a complete stop, yield to any remaining pedestrians in the crosswalk, and proceed when clear.

Cevap

The driver must bring the vehicle to a complete stop, yield to any pedestrians in the crosswalk, and proceed with caution once the crosswalk is clear.
At a pedestrian hybrid beacon (HAWK signal), dual flashing red lights indicate that drivers must come to a complete stop at the stop line. After stopping, drivers must yield to pedestrians in or approaching the crosswalk. If the crosswalk is completely clear, drivers may legally proceed while the lights continue flashing red.

Adım Adım Çözüm

1
Identify the signal type and current operating phase
The signal is a Pedestrian Hybrid Beacon (HAWK signal) displaying dual flashing red lights.
Different traffic signal types and phases govern right-of-way rules specifically.
2
Apply the statutory rule for a flashing red light phase at a pedestrian hybrid beacon
Treat the flashing red signal as equivalent to a stop sign: stop completely and yield to pedestrians.
State traffic laws mandate a full stop for flashing red signals.
3
Evaluate the intersection status and execute the proper driving maneuver
Because pedestrians have cleared the roadway, the driver may legally proceed after stopping.
Unlike steady red lights, flashing red beacon lights permit proceeding after stopping once pedestrians are clear.

Anahtar Kavram

Pedestrian Hybrid Beacon (HAWK Signal) Flashing Red Rules
Soru 333Soru →

When driving through a designated highway construction zone, a driver is legally permitted to resume the standard posted speed limit as soon as they pass the last visible worker or work vehicle, even if they have not yet reached an 'END ROAD WORK' sign.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Work zone speed limits and special zone regulations remain legally enforced until passing an official sign that terminates the zone, regardless of worker visibility.
The statement is false because statutory work zone rules and speed limits are defined by official traffic control signs. Drivers must maintain work zone compliance until passing an 'END ROAD WORK' sign or standard speed limit sign, even if no construction workers or machinery are currently visible.

Adım Adım Çözüm

1
Identify how special traffic zone boundaries are legally established.
Work zones are bounded by official traffic control devices, beginning with advance warning signs and ending at designated terminal signage such as 'END ROAD WORK'.
Traffic safety regulations mandate that statutory zone restrictions start and end at posted sign locations rather than temporary visual landmarks.
2
Determine the legal applicability of work zone speed limits across the entire zone.
Reduced speeds accommodate hidden hazards, lane shifts, shoulder drop-offs, and debris that persist even when workers are absent or not visible.
Unless a sign explicitly conditions the limit (such as 'WHEN WORKERS PRESENT'), the posted work zone limit applies continuously until the terminating sign.

Anahtar Kavram

Work Zone Sign Boundaries and Speed Rule Compliance
Tahmini Süre:1m 0s
Soru 334Soru →

While driving through a roadway work zone, you see an electronic arrow board mounted on a maintenance truck displaying a flashing arrow pattern pointing diagonally down to the right. What action should you take?

Cevabı ve açıklamayı göster

Cevap: Safely change lanes to the right or pass the work vehicle on the right side as indicated.

Cevap

Safely change lanes to the right or pass the work vehicle on the right side as indicated.
Electronic arrow boards in work and maintenance zones are designed to provide clear, early visual guidance. A flashing arrow pointing down to the right explicitly directs drivers to merge into the right lane or pass to the right of the obstruction.

Adım Adım Çözüm

1
Identify the function of the special zone traffic control device
Recognize that an electronic flashing arrow board is used in work zones to signal an upcoming lane closure or lane transition.
Arrow boards visually warn drivers far in advance so traffic can merge smoothly.
2
Determine the required driving action based on the directional signal
Follow the direction of the flashing arrow by moving into the open lane to the right.
The arrow points toward the safe path of travel, steering traffic clear of the closed lane and maintenance crew.

Anahtar Kavram

Work Zone Electronic Arrow Boards and Lane Control Devices
Soru 335Soru →

You are driving on a four-lane roadway separated by a raised concrete physical median barrier. As you enter a designated school zone, you observe a sign reading 'SCHOOL SPEED LIMIT 20 WHEN FLASHING' with yellow beacons actively flashing above it. Simultaneously, a school bus traveling in the opposite direction on the far side of the physical median comes to a stop with its red lights flashing and stop arm extended. Ahead of you is a marked school crosswalk with high-visibility ladder pavement markings that is currently clear of pedestrians. Which course of action must you legally take under these combined conditions?

Cevabı ve açıklamayı göster

Cevap: Reduce your speed to 20 mph due to the active flashing beacon, and proceed cautiously without stopping for the school bus across the physical median.

Cevap

Reduce speed to 20 mph due to the active flashing yellow beacon, and proceed without stopping for the school bus located on the opposite side of the physical median barrier.
Active flashing yellow beacons above a school speed limit sign enforce the posted reduced speed limit (20 mph) regardless of whether children are visible. Additionally, under standard traffic laws, drivers on the opposite side of a divided highway with a physical median barrier (such as a raised concrete curb) are not required to stop for a stopped school bus with flashing red lights.

Adım Adım Çözüm

1
Evaluate the school zone sign and active flashing beacon.
The active yellow flashing beacons legally mandate reducing speed to the posted 20 mph limit immediately upon entering the zone, regardless of whether children are visible.
Flashing yellow beacons indicate that the special school zone restriction period is currently active.
2
Analyze the school bus stopping requirement relative to the roadway layout.
Opposing traffic is not required to stop for a school bus with flashing red lights because a raised concrete physical median divides the direction of travel.
Traffic laws across standard state codes explicitly exempt opposing traffic from stopping when a physical barrier or unpaved space divides the highway.
3
Assess the legal obligation at the marked school crosswalk.
Yield right-of-way if pedestrians enter the crosswalk, but do not bring the vehicle to a full stop if the crosswalk is completely unoccupied.
High-visibility crosswalk markings establish yielding requirements for pedestrians; they do not function as mandatory stop lines when clear.

Anahtar Kavram

Synthesis of special zone speed regulations, physical median school bus exemptions, and crosswalk yielding rules.
Tahmini Süre:1m 30s
Soru 336Soru →

While driving on a multi-lane highway, you enter a designated work zone and notice a portable electronic arrow board displaying a flashing horizontal bar across the panel rather than a directional arrow pointing left or right. What action should you take?

Cevabı ve açıklamayı göster

Cevap: Continue safely in your current lane with heightened caution, as the signal indicates caution mode rather than a lane closure.

Cevap

Continue safely in your current lane with heightened caution, as the signal indicates caution mode rather than a lane closure.
On portable arrow boards used in construction and work zones, a flashing horizontal line, bar, or four flashing corners communicates caution mode. This warns drivers that maintenance or hazard activity is taking place on or near the roadway without requiring traffic to merge out of the lane.

Adım Adım Çözüm

1
Identify the signal displayed on the arrow board.
Recognize that a flashing horizontal bar (or line mode) signifies caution, not a directional lane merge command.
Arrow boards display solid directional arrows when a lane is closed, whereas flashing bars or four corners serve as caution warnings.
2
Determine the appropriate driving response.
Maintain your lane, reduce speed to safe work zone levels, and maintain increased alertness.
Unnecessary lane changes disrupt traffic flow and create collision risks in work zones.

Anahtar Kavram

Work Zone Electronic Arrow Board Display Signals
Soru 337Soru →

A driver facing a steady red arrow light in a dedicated right-turn lane is legally permitted to turn right after coming to a full stop and yielding to all cross traffic and pedestrians.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is false. A steady red arrow signal prohibits making a turn in the direction of the arrow, requiring drivers to remain stopped until a green arrow or green light is displayed.
The statement is false because traffic laws dictate that a steady red arrow means stop and remain stopped. Drivers may not proceed or execute a turn in the direction indicated by the arrow until a green signal is displayed.

Adım Adım Çözüm

1
Identify the signal type and direction
The signal is a steady red arrow pointing right.
Traffic signal rules differentiate between circular solid lights and directional arrow lights.
2
Apply traffic legal rules for steady red arrows
Unlike a circular red light, a steady red arrow explicitly forbids turning in the indicated direction while illuminated.
Red arrows indicate protected or restricted turn phases where movement in that direction is not allowed.

Anahtar Kavram

Steady Red Arrow Signal Rules
Soru 338Soru →

You are approaching an intersection in the left-turn lane and face a steady circular green light with no turn arrow displayed. Oncoming traffic is approaching from the opposite direction. What action must you take to execute your turn legally?

Cevabı ve açıklamayı göster

Cevap: Yield to all oncoming traffic and pedestrians, completing the turn only when a safe gap exists.

Cevap

Yield to all oncoming traffic and pedestrians, completing the turn only when a safe gap exists.
When facing a steady circular green light without a green arrow, left turns are permitted but unprotected. The turning driver is legally required to yield the right-of-way to all oncoming vehicles and pedestrians until it is safe to complete the turn.

Adım Adım Çözüm

1
Identify the signal aspect and turn condition
Recognize that a steady circular green light indicates an unprotected left turn when no green arrow is present.
Circular green signals permit entry into the intersection but do not provide right-of-way priority over straight-through traffic.
2
Apply right-of-way rules to oncoming traffic and pedestrians
Yield to vehicles approaching from the opposite direction and any pedestrians crossing the street.
Traffic laws mandate that turning vehicles must yield to oncoming traffic proceeding straight or turning right.
3
Execute the turn when clear
Proceed safely across the intersection into the target lane once traffic clears.
Ensures safe completion of the maneuver without forcing oncoming drivers to brake or swerve.

Anahtar Kavram

Unprotected Left Turns on Steady Circular Green Signals
Tahmini Süre:45s
Soru 339Soru →

A driver facing a steady circular red traffic light is legally permitted to make a left turn onto a one-way street after bringing the vehicle to a complete stop and yielding the right-of-way to pedestrians and oncoming traffic, provided the turn originates from a one-way street and no posted sign prohibits it.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. Drivers are permitted to turn left on a steady red light when turning from a one-way street onto another one-way street after stopping completely and yielding, unless a sign indicates otherwise.
The statement is true because standard motor vehicle codes permit a driver to execute a left turn on a steady circular red light when turning from a one-way street onto a one-way street, provided the driver makes a full stop and yields to pedestrians and conflicting traffic.

Adım Adım Çözüm

1
Evaluate the signal state and street configuration
The vehicle is stopped at a steady red light on a one-way street, preparing to turn onto another one-way street.
Traffic light rules vary depending on street directionality and turn lane designations.
2
Apply the statutory rule for turns on red
Because traffic on the intersecting street only flows from one direction, turning left from a one-way street onto a one-way street on red is permitted once the vehicle halts completely and yields right-of-way.
Standard rules of the road allow this specific movement to maintain traffic flow safely when no conflicting movement exists.

Anahtar Kavram

Left Turn on Red Rules for One-Way Streets
Soru 340Soru →

A motorist is approaching a marked mid-block crosswalk equipped with a Pedestrian Hybrid Beacon (HAWK signal). As the vehicle reaches the stop line, the beacon displays two solid red lights. Which of the following actions is the motorist legally required to take?

Cevabı ve açıklamayı göster

Cevap: Come to a complete stop before the stop line or crosswalk and remain stopped for the entire duration of the solid red display.

Cevap

The motorist must come to a complete stop before the stop line or crosswalk and remain stopped for the entire duration of the solid red display.
When a Pedestrian Hybrid Beacon displays two solid red lights, drivers must bring their vehicle to a complete stop before the stop line or crosswalk and remain fully stopped until the signal phase changes. Drivers may only proceed after stopping once the signal transitions to the alternating flashing red phase and the crosswalk is clear.

Adım Adım Çözüm

1
Identify the signal type and current phase
The signal is a Pedestrian Hybrid Beacon displaying two solid red lights.
Different signal phases (solid yellow, solid red, alternating flashing red, dark) mandate distinct driver actions.
2
Apply the traffic control rule for a solid red Pedestrian Hybrid Beacon phase
Drivers must stop completely behind the stop line or crosswalk line.
The solid red phase creates an explicit stop requirement to allow pedestrians to safely initiate crossing.
3
Determine legal permission to proceed
Drivers must remain stopped until the signal phase changes to alternating flashing red or turns off.
Unlike the alternating flashing red phase (stop and proceed when clear), a solid red indication strictly requires vehicles to remain stationary regardless of pedestrian position.

Anahtar Kavram

Pedestrian Hybrid Beacon (HAWK Signal) Solid Red Phase Rules
ÖncekiSayfa 17 / 25Sonraki