Examkin

Soru

Zorluk: ZorErgonomics and Safe Use of Equipment

Prior to transferring a client with bilateral lower extremity weakness from a bed to a bedside chair, it is determined that a powered sit-to-stand mechanical lift is indicated. Place the following steps for operating this equipment in the correct sequence to maximize ergonomic safety and prevent injury.

  1. 1Confirm the client has partial weight-bearing ability and can follow simple commands.
  2. 2Place the wheelchair adjacent to the bed and engage the wheel locks.
  3. 3Wrap the lift sling securely around the client's torso and fasten the support belt.
  4. 4Maneuver the lift device forward so the client's feet rest flat on the platform and knees touch the padded brace.
  5. 5Secure the sling attachments to the lifting mechanism and perform a visual check of all connections.
  6. 6Instruct the client to hold the safety handles while slowly activating the lift to an upright position.

Cevap

The correct sequence requires prioritizing client assessment, followed by environmental safety, application of the sling, positioning the client on the device, securing the straps to the lift, and finally executing the transfer.
Safe use of mechanical transfer equipment dictates a logical progression to prevent musculoskeletal injury to both the client and the nurse. The sequence must move from assessment (suitability for the specific equipment) to environmental safety (locking brakes), to applying the wearable component (sling), to positioning the client onto the stationary base of the machine, to connecting the lifting mechanism, and finally, executing the mechanical lift. Any deviation exposes the client to a risk of falls or joint strain.

Adım Adım Çözüm

1
Confirm the client has partial weight-bearing ability and can follow simple commands.
Validates the client is an appropriate candidate for a sit-to-stand lift.
Active mechanical lifts require patient participation; failing to assess this risks a severe fall.
2
Place the wheelchair adjacent to the bed and engage the wheel locks.
Establishes a safe destination for the transfer.
Securing the wheelchair prevents it from rolling away when the client is lowered.
3
Wrap the lift sling securely around the client's torso and fasten the support belt.
Prepares the client for connection to the lift.
Applying the sling first minimizes the time the bulky lifting machine needs to hover near the client's bed space.
4
Maneuver the lift device forward so the client's feet rest flat on the platform and knees touch the padded brace.
Aligns the client ergonomically with the lift's pivot points.
Proper bracing of the lower extremities prevents joint hyperextension and musculoskeletal strain during the lift.
5
Secure the sling attachments to the lifting mechanism and perform a visual check of all connections.
Safely couples the client to the lift.
Double-checking connections is a mandatory safety protocol to prevent equipment detachment.
6
Instruct the client to hold the safety handles while slowly activating the lift to an upright position.
Completes the transfer preparation and begins the elevation phase.
Lifting only occurs after all previous steps confirm maximum ergonomic alignment and safety.

Anahtar Kavram

The safe and ergonomic operation of a sit-to-stand mechanical lift requires a strict sequence: cognitive/physical assessment, environmental preparation, client preparation, precise anatomical alignment with the device, and secure attachment prior to activation.
Bu soruyu puanla

Konular

Ergonomics and Safe Use of Equipment

Bu konudan daha fazla soru