You are approaching a standard four-arm roundabout with two unmarked lanes on the approach road. You intend to turn right and take the third exit. Unless signs or road markings indicate otherwise, which procedure should you follow for lane positioning and signalling?
- AApproach in the left-hand lane indicating right, stay in the outer lane of the roundabout, and switch to a left indicator when level with the third exit
- Approach in the right-hand lane indicating right, keep to the right on the circulatory carriageway, and signal left after passing the exit immediately before the third exitCevap
- CApproach in the right-hand lane indicating right, steer across to the outer lane immediately upon entering without checking your nearside blind spot, and keep indicating right until leaving
- DApproach in the right-hand lane without indicating, entering the circulatory carriageway only when a circulating driver flashes their headlights to give you priority
Cevap
Approach in the right-hand lane indicating right, keep to the right on the circulatory carriageway, and signal left after passing the exit immediately before the third exit.
According to Highway Code Rule 186, when taking an exit to the right or going full circle at a roundabout, you should signal right and approach in the right-hand lane unless signs or markings indicate otherwise. You should keep to the right on the roundabout until you need to change lanes to exit, and signal left after passing the exit immediately before the one you want.
Adım Adım Çözüm
Anahtar Kavram
Correct lane selection, positioning, and signalling sequence when turning right at a roundabout under Highway Code Rule 186.
Tahmini Süre:1m 0s