Examkin

Soru

Zorluk: OrtaIce and Snow Conditions

Before undertaking an essential journey following heavy overnight snowfall, you must prepare your vehicle and set off safely. In what sequence should you carry out the following actions?

  1. 1Remove all snow and ice completely from the roof, bonnet, lights, number plates, and all glass surfaces.
  2. 2Start the engine and operate the vehicle's demisters until all interior glass is completely clear of mist and condensation.
  3. 3Select second gear rather than first gear to reduce torque delivered to the driven wheels.
  4. 4Ease the clutch up gently and apply minimal accelerator to establish grip as the vehicle begins to roll forward.

Cevap

Clear exterior snow from the roof, lights, and glass; demist all interior windows fully; select second gear; ease the clutch up smoothly with minimal throttle to move off.
Safe winter driving begins with thorough vehicle preparation before any movement takes place. Under Highway Code Rule 229, all snow and ice must be completely cleared from all lights, number plates, mirrors, windows, and the roof. Next, the interior glass must be thoroughly demisted before setting off so you have full visibility. When ready to move, selecting second gear dampens engine torque to the drive wheels, preventing wheelspin, and easing the clutch up gently with minimal throttle allows the tyres to gain initial traction.

Adım Adım Çözüm

1
Clear all exterior snow and ice from the roof, bonnet, lights, number plates, and glass.
The vehicle is legally compliant, lights are visible, and snow will not slide forward over the windscreen during braking.
Highway Code Rule 229 mandates that all lights, number plates, and glass must be clear, and loose snow on the roof must be removed to avoid endangering others.
2
Use the heating and demisting system to clear all interior condensation.
Full, clear 360-degree visibility is achieved before moving the vehicle.
Driving with misted windows restricts hazard awareness and is unsafe and illegal.
3
Engage second gear before attempting to move off.
Excessive torque to the driven wheels is suppressed.
First gear delivers high torque which causes the driven wheels to spin freely on compacted snow and ice.
4
Release the clutch progressively with gentle, light throttle input.
The tyres maintain traction and the vehicle moves off smoothly.
Gentle mechanical control prevents breaking the delicate friction boundary between the tyre tread and the icy surface.

Anahtar Kavram

Vehicle preparation under Highway Code Rule 229 and low-torque moving-off technique in snow and ice.
Tahmini Süre:1m 0s
Bu soruyu puanla

Konular

Ice and Snow Conditions

Bu konudan daha fazla soru