You are carrying out routine daily and pre-journey safety checks on your car. How should you properly check that the footbrake (service brake) is operating safely before you drive at normal traffic speeds?
- APress the brake pedal firmly while stationary; a red brake warning lamp should illuminate on the dashboard to confirm working hydraulic pressure.
- BInspect the outer shoulders of the front tyres; heavy outer edge wear confirms that the braking system is applying balanced stopping force.
- Test the brakes gently as you pull away at low speed; they should feel firm rather than spongy or slack, and the car must not pull to one side.Cevap
- DAccelerate up to the national speed limit on an open road and brake aggressively to ensure that the anti-lock braking system (ABS) activates.
Cevap
Test the brakes gently as you pull away at low speed; they should feel firm rather than spongy or slack, and the car must not pull to one side.
Brakes must be tested as you set off at a low speed. They should feel firm and responsive, not spongy or slack, and the vehicle should track straight without pulling to either side when the pedal is depressed.
Adım Adım Çözüm
Anahtar Kavram
Pre-journey brake operation check and fault identification
Tahmini Süre:1m 0s