Examkin

Attitude

109 soru

Tüm türler109Çoktan seçmeli56Çoklu seçim8Doğru / Yanlış23Eşleştirme8Sıralama14
Soru 21Soru →

While moving towards a traffic-calming chicane where your lane has priority, an oncoming lorry flashes its headlights and commits to the narrow section ahead of a cyclist. What should you do?

Cevabı ve açıklamayı göster

Cevap: Hold back and wait patiently for the oncoming traffic to clear the restriction completely.

Cevap

Hold back and wait patiently for the oncoming traffic to clear the restriction completely.
Although traffic signs may indicate priority over oncoming traffic, priority is not an absolute right. When an oncoming vehicle is already entering or committed to the narrowed section, a courteous driver must hold back, wait patiently, and avoid insisting on the right of way.

Adım Adım Çözüm

1
Assess the positioning and movement of oncoming road users at the narrow chicane.
Identify that an oncoming lorry and cyclist are already committed to passing through the single-lane restriction.
Observing ongoing traffic behaviour prevents dangerous conflicts before entering a constrained roadway.
2
Apply the Highway Code principle regarding priority and road courtesy.
Decide to yield and wait before the chicane until the oncoming vehicles have passed safely.
Priority is not an absolute right; drivers must never insist on priority when doing so forces a conflict or endangers others.

Anahtar Kavram

Priority is given, not taken; drivers must never insist on priority when another vehicle is already committed to a narrow road section.
Tahmini Süre:1m 0s
Soru 22Soru →

You are driving along a quiet road and approach a horse and rider ahead. What should you do when preparing to pass them?

Cevabı ve açıklamayı göster

Cevap: Slow down, keep engine revs low, and leave plenty of room when passing

Cevap

Slow down, keep engine revs low, and leave plenty of room when passing
Under the Highway Code, drivers must treat horses with great care. You should slow down, keep your engine revs low to minimise noise, and pass wide and slow (giving at least 2 metres of space and driving at 10 mph or less) only when it is safe to do so.

Adım Adım Çözüm

1
Identify the vulnerable road user ahead and recognise their specific vulnerability.
Horses are large, easily frightened animals that can react unpredictably to sudden loud sounds and fast-moving vehicles.
Drivers must show consideration and reduce potential triggers that could panic the animal.
2
Adjust driving behaviour to pass safely in accordance with Highway Code guidance.
Reduce speed significantly, avoid revving the engine or sounding the horn, and wait for a safe gap to pass slowly with at least 2 metres of clearance.
Passing slowly and quietly with generous clearance prevents spooking the horse and maintains safety for all road users.

Anahtar Kavram

Safely approaching and passing horses and equestrian road users with patience and low noise
Tahmini Süre:45s
Soru 23Soru →

You are driving along a narrow country lane at 30 mph and encounter two horse riders ahead. The road curves sharply to the right with hidden visibility, and a stationary delivery van is parked on the left verge just past the bend. What is the safest and most considerate course of action to take?

Cevabı ve açıklamayı göster

Cevap: Reduce your speed to 10 mph or less, stay well back without revving the engine, and wait patiently until you have navigated the bend and have a clear view to pass with at least 2 metres of clearance.

Cevap

Reduce your speed to 10 mph or less, stay well back without revving the engine, and wait patiently until you have navigated the bend and have a clear view to pass with at least 2 metres of clearance.
The correct action follows Highway Code Rule 215 and the Hierarchy of Road Users. Drivers must slow down to a maximum of 10 mph when approaching horses, remain patient, keep engine revs low, and refrain from sounding the horn. Because the bend obscures the view of oncoming traffic and the parked van restricts space, the driver must hold back until there is adequate vision and room to give at least 2 metres of clearance.

Adım Adım Çözüm

1
Assess the immediate hazards and vulnerable road users ahead.
Identify the horses, the approaching blind bend, and the parked delivery van limiting forward visibility and road space.
Horse riders are vulnerable road users who can be easily startled by vehicle noise or sudden movements.
2
Adjust speed and following position in accordance with the Highway Code.
Slow down to 10 mph or less, maintain low engine revs, and stay well back from the animals.
Rule 215 of the Highway Code specifies passing horses at a maximum of 10 mph without loud engine noise or horn usage.
3
Hold back until the road ahead is completely visible and safe.
Wait until the blind bend and the parked vehicle are safely cleared with an unobstructed view of oncoming traffic.
Overtaking requires at least 2 metres (6.5 feet) of safe clearance, which cannot be guaranteed on a blind bend.

Anahtar Kavram

Highway Code rules for passing vulnerable road users (equestrians) with appropriate speed, noise control, and spatial clearance
Tahmini Süre:1m 15s
Soru 24Soru →

After completing an overtaking manoeuvre on an open road, what should you do before moving back into the left-hand lane?

Cevabı ve açıklamayı göster

Cevap: Check your interior rear-view mirror to ensure the overtaken vehicle is fully visible before returning

Cevap

Check your interior rear-view mirror to ensure the overtaken vehicle is fully visible before returning to the left-hand lane.
When completing an overtaking manoeuvre, the Highway Code requires drivers to move back to the left as soon as it is safe to do so, without cutting in. Waiting until the overtaken vehicle is clearly visible in the interior rear-view mirror ensures that a safe separation distance exists before returning to the lane.

Adım Adım Çözüm

1
Complete the pass and maintain a steady overtaking speed
Ensure your vehicle draws clear of the vehicle being overtaken.
Prevents slowing down or lingering unnecessarily in the overtaking lane.
2
Check the interior rear-view mirror
Confirm that the entire front of the overtaken vehicle is clearly visible in the mirror.
Provides a reliable visual indicator that sufficient separation distance exists to avoid cutting in.
3
Signal if necessary and smoothly steer back into the left lane
Re-establish position in the left lane without forcing the driver behind to brake.
Adheres to Highway Code rules on courteous driving and maintaining adequate safety margins.

Anahtar Kavram

Safe lane re-entry after overtaking without cutting in
Tahmini Süre:45s
Soru 25Soru →

A doctor driving a vehicle that displays a flashing green beacon is granted legal exemption from standard road traffic laws, including speed limits and red traffic signals.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. A vehicle displaying a flashing green beacon is driven by a doctor on an emergency call, but the driver is not exempt from traffic laws, speed limits, or red traffic signals.
Under UK traffic regulations and Highway Code guidance, a flashing green beacon identifies a doctor on an emergency call. While drivers should assist by allowing them to pass when safe to do so, green beacon vehicles possess no statutory exemptions from speed limits, red traffic lights, or standard priority rules.

Adım Adım Çözüm

1
Identify the meaning and purpose of a flashing green beacon under the UK Highway Code.
A flashing green beacon identifies a medical doctor who is answering an emergency call.
Different warning beacon colours are designated to specific vehicle categories and service roles.
2
Evaluate the legal exemptions associated with green beacons compared to blue emergency beacons.
Vehicles displaying flashing green beacons do not have statutory exemptions from traffic lights, road signs, or speed limits.
Only designated emergency response vehicles utilizing blue beacons hold specific exemptions under road traffic regulations.

Anahtar Kavram

Flashing green beacons and legal obligations of emergency medical doctors
Tahmini Süre:45s
Soru 26Soru →

You are driving along an urban road and approaching a junction where you intend to turn left into a side street. A pedestrian has started crossing the mouth of the side road, and a cyclist is travelling alongside you on your nearside. What should you do?

Cevabı ve açıklamayı göster

Cevap: Wait for the pedestrian to complete crossing and allow the cyclist to pass before turning.

Cevap

Wait for the pedestrian to complete crossing and allow the cyclist to pass before turning.
Under the UK Highway Code Hierarchy of Road Users, drivers must give way to pedestrians who are crossing or waiting to cross at a junction (Rule H2). Furthermore, drivers must not turn across the path of cyclists continuing straight ahead (Rule H3). The correct, considerate course of action is to hold back, allow the pedestrian to reach the pavement safely, let the cyclist pass, and then complete the turn.

Adım Adım Çözüm

1
Assess the situation and identify vulnerable road users around the junction.
Recognise that a pedestrian is already crossing the side road and a cyclist is proceeding on the nearside.
Early observation allows the driver to adjust speed smoothly and anticipate potential conflicts.
2
Apply the Highway Code Hierarchy of Road Users (Rules H2 and H3).
Yield priority to the pedestrian crossing the side road and avoid cutting across the cyclist's path.
Drivers have a duty of care to protect more vulnerable road users and must never turn across their right of way.
3
Hold back patiently behind the cyclist and junction line until the way is completely clear.
Execute the turn safely only after the pedestrian has safely crossed and the cyclist has cleared the junction.
Ensures no vulnerable road user is placed under pressure, startled, or cut off.

Anahtar Kavram

Giving priority and safe consideration to pedestrians and cyclists at junctions under Highway Code Rules H2 and H3
Tahmini Süre:1m 0s
Soru 27Soru →

Drivers must recognise different vehicle warning beacon colours to anticipate hazards and respond safely. Match each flashing beacon colour to the correct vehicle service or purpose.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Blue flashing beacon
Green flashing beacon
Amber flashing beacon

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Blue flashing beacon matches emergency services such as police, fire, or ambulance; Green flashing beacon matches a doctor on an active emergency call; Amber flashing beacon matches breakdown recovery, road maintenance, or slow-moving service vehicles.
Under UK traffic regulations and the Highway Code, blue flashing beacons designate frontline emergency services such as police, fire, and ambulance. Green flashing beacons identify doctors travelling on emergency calls. Amber flashing beacons are used by breakdown recovery, maintenance vehicles, and vehicles that are slow-moving to alert other road users to their presence.

Adım Adım Çözüm

1
Identify the primary emergency services vehicle beacon colour.
Blue flashing beacon corresponds to police, fire, or ambulance vehicles.
The Highway Code designates blue lights for statutory emergency services attending an incident.
2
Identify the beacon colour designated for medical practitioners.
Green flashing beacon corresponds to a doctor answering an emergency call.
Green beacons identify doctors attending medical emergencies, alerting road users to facilitate passage where safe.
3
Identify the beacon colour used for hazard warning and road assistance.
Amber flashing beacon corresponds to breakdown recovery and maintenance vehicles.
Amber beacons warn drivers of slow-moving traffic, road clearance, or recovery operations.

Anahtar Kavram

Recognition of emergency and service vehicle flashing beacon colours under the Highway Code
Tahmini Süre:45s
Soru 28Soru →

Under the UK Highway Code, cyclists are entitled to ride in the centre of their lane (the primary road position) on narrow roads or when approaching junctions, and following drivers must wait behind rather than attempting to squeeze past.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True
The statement accurately reflects Highway Code Rule 213 and the principles of consideration for vulnerable road users, which permit cyclists to ride centrally in narrow road conditions while requiring drivers to remain patiently behind.

Adım Adım Çözüm

1
Identify the vulnerable road user's positioning rights under the Highway Code.
Cyclists are explicitly permitted to ride in the centre of the lane (primary position) on narrow sections of road and at junction approaches for visibility and safety.
Rule 213 supports cyclist safety by preventing drivers from overtaking dangerously where road width is restricted.
2
Determine the required driver attitude and action.
Drivers following the cyclist must be patient and wait behind until it is safe to overtake with full clearance.
Attempting to squeeze past in the same lane breaches safety rules and endangers the cyclist.

Anahtar Kavram

Consideration and patience for cyclists adopting primary lane positioning on narrow roads and junctions
Tahmini Süre:45s
Soru 29Soru →

You are waiting to turn right out of a side road into a multi-lane main road. An approaching driver in the nearest lane slows down and flashes their headlights at you. Which of the following actions should you take according to The Highway Code?

Cevabı ve açıklamayı göster

Cevap: Remain waiting and assess the situation yourself, treating the flash only as an indication that the vehicle is there.

Cevap

Remain waiting and assess the situation yourself, treating the flash only as an indication that the vehicle is there.
Under Rules 110 and 111 of The Highway Code, flashing headlights only serve to alert other road users that a vehicle is there. You must never assume that a flash is an invitation to proceed, nor does it confer priority. The correct procedure is to remain stationary, make your own independent observations of all traffic lanes, and only move off when it is entirely safe.

Adım Adım Çözüm

1
Identify the official meaning of flashing headlights under The Highway Code.
Recognise that Rules 110 and 111 define flashing headlights solely as a way to alert others of a vehicle's presence, not as an invitation or permission to proceed.
Drivers must know the official regulatory meaning of vehicle signals to avoid hazardous misinterpretations.
2
Evaluate the hazards of relying on informal signals from another driver.
Determine that drivers in adjacent lanes, cyclists, or pedestrians may not have seen the signal and may continue proceeding along the main road.
Another road user cannot guarantee that the entire roadway is safe for your manoeuvre.
3
Select the appropriate safe driving action.
Hold your position at the junction, complete comprehensive observations across all lanes, and emerge only when personally satisfied it is safe.
Every driver is individually responsible for ensuring their manoeuvre is safe before moving off.

Anahtar Kavram

Flashing headlights only warn other road users of your presence and must never be interpreted as an invitation or priority to proceed.
Tahmini Süre:1m 0s
Soru 30Soru →

If a motorist cuts sharply across your vehicle and gestures angrily, flashing your headlights to reprimand their behaviour is an acceptable reaction under The Highway Code.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false. The Highway Code states that headlights should only be flashed to alert other road users to your presence. They must never be used to reprimand, intimidate, or display anger towards other drivers, as retaliatory actions can escalate road rage into dangerous physical or vehicular confrontations.

Adım Adım Çözüm

1
Identify the scenario and the proposed driver reaction
Another motorist cuts across sharply with an aggressive gesture, and the driver responds by flashing headlights to reprimand them.
Evaluating whether retaliatory signalling is appropriate requires examining the driver's response against defensive driving principles.
2
Apply Highway Code guidance on vehicle signals and aggressive situations
Headlights must only be flashed to let others know of your presence, never to intimidate, reprimand, or express frustration.
Challenging aggressive motorists or using vehicle equipment to retaliate escalates conflict and increases the risk of a collision.
3
Determine the validity of the statement
The claim that flashing headlights is an acceptable reaction to reprimand someone is false.
Drivers should remain calm, stay detached from provocation, and avoid using controls to show displeasure.

Anahtar Kavram

De-escalating aggressive driving and avoiding retaliatory signalling
Tahmini Süre:45s
Soru 31Soru →

When overtaking a cyclist at speeds up to 30 mph, you should leave at least 1.5 metres (5 feet) of clearance.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True
Under UK Highway Code Rule 163, drivers must leave at least 1.5 metres (5 feet) of space when overtaking cyclists at speeds of up to 30 mph, and even more space when travelling at higher speeds or in adverse conditions.

Adım Adım Çözüm

1
Identify the vulnerable road user and the speed context in the scenario
The question concerns overtaking a cyclist at speeds up to 30 mph.
The UK Highway Code sets specific minimum clearance distances based on vehicle speed and road user vulnerability.
2
Apply Highway Code Rule 163 passing clearance guidelines
The minimum recommended clearance is at least 1.5 metres when driving at speeds up to 30 mph.
This space ensures safety if the cyclist is affected by wind gusts or needs to avoid potholes and drain covers.

Anahtar Kavram

Safe passing distances when overtaking cyclists under the UK Highway Code
Tahmini Süre:45s
Soru 32Soru →

You are parked at the side of the road and preparing to move off into moving traffic. After checking your interior and exterior mirrors and applying the appropriate signal, what must you do immediately before pulling away from the kerb?

Cevabı ve açıklamayı göster

Cevap: Look over your right shoulder to check the blind spot for any unseen road users

Cevap

Check your blind spot by looking over your right shoulder for approaching road users before moving off.
Before moving off from the kerb, performing a final physical check over your shoulder into the blind spot is essential. Mirrors cannot show the entire area around your vehicle, so a shoulder check ensures no cyclists, motorcyclists, or other vehicles have entered your blind spot.

Adım Adım Çözüm

1
Complete the full Mirror-Signal routine
Assessed traffic visible in interior and door mirrors and communicated intentions to other road users.
Mirrors provide awareness of traffic directly behind and alongside, but cannot capture every angle.
2
Perform a physical shoulder check into the blind spot immediately before moving
Ensured that no vulnerable road users (cyclists, motorcyclists, or pedestrians) are hidden alongside the vehicle.
The vehicle's door and window pillars create blind spots that require direct observation before moving into the lane.

Anahtar Kavram

All-round awareness and physical blind spot checks prior to moving off
Tahmini Süre:45s
Soru 33Soru →

You are driving on a wet, unlit rural road and are following a Large Goods Vehicle (LGV). A passenger car behind you is tailgating aggressively. To maintain a safe driving environment under these compound conditions, which of the following actions are correct? (Select all that apply)

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Gradually ease off the accelerator to increase your following distance from the LGV to significantly more than four seconds.; Drop back far enough so that you can clearly see the exterior mirrors of the LGV ahead of you.

Cevap

You should gradually ease off the accelerator to increase your following distance to more than four seconds, and position your vehicle so you can clearly see the LGV's exterior mirrors.
The correct actions synthesize multiple safety rules. First, the standard two-second rule must be doubled to four seconds in wet conditions. Second, when being tailgated, you must increase your forward gap even further to allow for gradual braking, preventing a rear-end collision. Third, when following a Large Goods Vehicle, you must position yourself far enough back to see its exterior mirrors, ensuring the driver can see you and improving your forward visibility.

Adım Adım Çözüm

1
Evaluate the weather conditions.
The road is wet.
The standard two-second time gap must be doubled to four seconds.
2
Evaluate the tailgating hazard behind you.
An aggressive driver is following too closely.
You must increase your forward safety margin beyond four seconds so you can brake gradually if necessary, protecting yourself from a rear-end collision.
3
Evaluate the vehicle ahead.
It is a Large Goods Vehicle (LGV) with significant blind spots.
You must drop back until you can see the LGV's exterior mirrors to ensure the driver can see you and to maximize your own forward visibility.
4
Determine the correct scanning strategy.
Maintain continuous forward scanning while checking mirrors.
Fixating solely on the tailgater removes your attention from the road ahead, increasing the risk of an accident.

Anahtar Kavram

Compound Safety Margins and Hazards
Soru 34Soru →

You are driving uphill on a narrow single carriageway and following a cyclist who is travelling slowly and wobbling to maintain balance. What should you do?

Cevabı ve açıklamayı göster

Cevap: Hold back at a safe distance and only overtake when you have a clear view ahead, leaving at least 1.5 metres of clearance

Cevap

Hold back at a safe distance and only overtake when you have a clear view ahead, leaving at least 1.5 metres of clearance.
Cyclists travelling uphill move slowly and naturally wobble or adjust their line to maintain balance and momentum. Drivers must demonstrate patience by holding back until the road ahead offers a clear view, and only overtake when they can provide at least 1.5 metres of passing clearance.

Adım Adım Çözüm

1
Recognise the vulnerability and movement characteristics of the road user
Identify that cyclists riding slowly uphill often sway laterally to maintain balance and require extra room
Vulnerable road users on inclines need patience and significantly wider safety margins from following traffic
2
Evaluate road conditions, oncoming hazards, and visibility ahead
Determine whether the forward view is sufficient to safely complete an overtaking manoeuvre without sudden hazards
Overtaking on hills or narrow sections without full view of oncoming traffic creates extreme collision risks
3
Execute the passing manoeuvre only when completely safe, adhering to UK Highway Code clearance guidelines
Pass leaving at least 1.5 metres of space at appropriate speed once the road ahead is completely clear
Rule 163 of The Highway Code specifies leaving at least 1.5 metres when overtaking cyclists at speeds up to 30 mph

Anahtar Kavram

Consideration and safe passing clearances for vulnerable road users on inclines and narrow roads.
Tahmini Süre:1m 0s
Soru 35Soru →

You are approaching a signal-controlled crossroads marked with a yellow criss-cross box junction. You intend to turn right and your exit road is clear, but oncoming traffic is preventing you from completing the turn immediately. What should you do?

Cevabı ve açıklamayı göster

Cevap: Enter the box junction and wait until there is a safe gap in oncoming traffic before completing the turn

Cevap

Enter the box junction and wait until there is a safe gap in oncoming traffic before completing the turn.
According to the Highway Code (Rule 174), drivers are allowed to enter a yellow box junction and wait when turning right, provided their exit road is clear and they are only prevented from turning by oncoming traffic. You must wait patiently for a safe gap in oncoming traffic before completing the turn.

Adım Adım Çözüm

1
Check the exit road of the turn to ensure it is clear of obstructions and identify the oncoming traffic stream.
Confirms eligibility for the box junction right-turn exception under Highway Code Rule 174.
You are legally permitted to enter a yellow box junction if you want to turn right and are only held up by oncoming traffic or other right-turning vehicles.
2
Move forward into the box, wait safely for oncoming vehicles and cyclists to pass, and complete the turn when clear.
Safely negotiates the junction without obstructing following traffic or violating right-of-way rules.
Waiting inside the box allows you to turn smoothly as soon as a safe gap appears without demanding priority or endangering other road users.

Anahtar Kavram

Highway Code Rule 174 right-turn exception for yellow box junctions and yielding to oncoming traffic.
Tahmini Süre:1m 0s
Soru 36Soru →

You are driving along an urban road with stationary traffic queued in the opposing lane and vehicles parked along your left-hand side. Ahead, an oncoming driver in the queue flashes their headlights near an unmarked side junction. What should you do to maintain safety?

Cevabı ve açıklamayı göster

Cevap: Scan the gap actively, reduce your speed, and anticipate that pedestrians, cyclists, or emerging vehicles may cross through the queue.

Cevap

Scan the gap actively, reduce your speed, and anticipate that pedestrians, cyclists, or emerging vehicles may cross through the queue.
When a driver flashes their headlights near a junction or gap in traffic, they are often attempting to let another road user turn across or cross the carriageway. Because stationary queues create significant blind spots, defensive drivers must scan actively, slow down, and prepare to stop for emerging vehicles, cyclists, or pedestrians who may move into their path.

Adım Adım Çözüm

1
Assess the situation and recognise the risks created by the headlight signal and the traffic gap.
Identify that another road user may attempt to cross through the blind gap in the stationary opposing traffic.
Rule 111 of The Highway Code states that flashing headlights only serve to alert other road users of a vehicle's presence, not to give priority or signal safety.
2
Adjust vehicle speed and adopt an active, wide visual scanning pattern across the gap, side road, and parked vehicles.
Create sufficient time and stopping distance to respond to any hidden hazards.
Early observation and anticipation prevent sudden braking and allow a safe response to emerging vulnerable road users or vehicles.

Anahtar Kavram

Defensive observation, anticipation of hidden hazards, and correct interpretation of headlight signals
Tahmini Süre:1m 0s
Soru 37Soru →

You have slowed down and stopped at a zebra crossing to allow a pedestrian to cross. Why should you avoid flashing your headlights or waving your hand to invite them across?

Cevabı ve açıklamayı göster

Cevap: Another vehicle approaching or overtaking may not have seen them and could put them in danger

Cevap

Another road user, such as an overtaking vehicle or cyclist, might not see the pedestrian and could collide with them.
You must never wave or flash your headlights to invite pedestrians to cross. Doing so can cause them to step into the road without checking for other hazards, placing them directly in the path of approaching or overtaking vehicles and cyclists who may not have seen them.

Adım Adım Çözüm

1
Identify the relevant guidance in The Highway Code regarding signalling to pedestrians.
The Highway Code states that drivers should never wave people across or flash headlights to invite them to cross.
Drivers cannot control the view, speed, or actions of other approaching road users.
2
Assess the potential hazard caused by giving an encouraging signal.
The pedestrian may trust the driver's signal and step into the roadway without checking for overtaking or oncoming traffic.
Pedestrians must make their own independent decision to cross when they judge it is completely safe.

Anahtar Kavram

Improper use of vehicle signals to direct or invite other road users
Tahmini Süre:45s
Soru 38Soru →

Match each UK road priority scenario or road layout to the correct driver action required by the Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Approaching an unmarked crossroads where multiple vehicles arrive simultaneously
Approaching a mini-roundabout when a vehicle is arriving from your immediate right
Preparing to turn into a side road where a pedestrian has started crossing
Approaching a road narrowing controlled by a circular sign with a red border showing a red left arrow and black right arrow

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Unmarked crossroads matches with recognising no vehicle has automatic right of way; mini-roundabout matches with giving way to the right; side road turn with crossing pedestrian matches with giving way to the pedestrian; road narrowing with circular red priority sign matches with giving way to oncoming traffic.
Each scenario correctly reflects official UK Highway Code rules: unmarked crossroads grant no automatic right of way to any party; roundabouts require yielding to traffic from the right; Rule H2 requires drivers turning into side roads to give way to crossing pedestrians; and circular red regulatory signs mandate yielding priority to oncoming vehicles at road narrowings.

Adım Adım Çözüm

1
Assess the unmarked crossroads scenario
Identify that unmarked junctions carry no statutory right of way for any user
The Highway Code establishes that no driver has automatic priority at junctions lacking signs or markings.
2
Apply roundabout priority rules to the mini-roundabout
Identify that priority must be given to traffic approaching from the right
Rule 185 mandates yielding to vehicles approaching from the right on roundabout approaches.
3
Evaluate pedestrian hierarchy at junction turns under Rule H2
Identify that turning vehicles must yield to crossing pedestrians
The Hierarchy of Road Users establishes pedestrian priority when vehicles turn into side roads.
4
Interpret regulatory priority traffic signs at traffic-calmed narrowings
Identify the mandatory duty to give way to oncoming traffic
Circular signs with red borders give orders that must be obeyed, requiring drivers to yield oncoming priority.

Anahtar Kavram

Correct application of Highway Code priority rules, regulatory signs, and the hierarchy of road users across varied UK road layouts.
Tahmini Süre:1m 30s
Soru 39Soru →

You are driving along a two-way urban road where parked vehicles obstruct your side of the carriageway. Ahead, an oncoming Large Goods Vehicle (LGV) slows down and flashes its headlights at you, while a cyclist directly ahead of you begins to steer out around the parked cars. Which of the following actions should you take?

Cevabı ve açıklamayı göster

Cevap: Hold back behind the parked vehicles to give the cyclist ample clearance to pass the obstruction and allow the oncoming large vehicle to clear the narrow section.

Cevap

Hold back behind the parked vehicles to provide the cyclist with adequate room to pass the obstruction safely and allow the oncoming large vehicle through.
Holding back behind the parked vehicles is the safest and correct action. Because the road obstruction is on your side of the carriageway, oncoming vehicles have priority. Furthermore, the Highway Code requires drivers to protect more vulnerable road users by giving cyclists sufficient time and space (at least 1.5 metres) to clear obstructions safely. Flashed headlights must never be interpreted as an official invitation or guarantee that the road is clear.

Adım Adım Çözüm

1
Assess road priority and existing physical hazards
Recognise that the physical obstruction is on your side of the carriageway, meaning oncoming traffic naturally has priority.
When your lane is blocked by parked cars, you must yield to oncoming traffic unless road markings or signs dictate otherwise.
2
Evaluate the signal from the oncoming driver
Do not assume the flashed headlights are an invitation or guarantee of safety to proceed.
Highway Code Rule 110 states that flashing headlights should only be used to let others know you are there. Other drivers may flash without being aware of other road users.
3
Apply the hierarchy of road users and maintain safety margins
Give precedence to the cyclist ahead by waiting behind the parked cars until both the cyclist and the oncoming LGV have safely passed.
Cyclists are vulnerable road users and need ample space to navigate around parked obstacles without being pressured or endangered by following vehicles.

Anahtar Kavram

Priority at road narrowings, correct interpretation of headlight flashes, and duty of care towards vulnerable road users under the Highway Code hierarchy.
Tahmini Süre:1m 15s
Soru 40Soru →

You are approaching an unmarked crossroads where there are no traffic signs or road markings. How should you approach the junction regarding priority?

Cevabı ve açıklamayı göster

Cevap: Slow down, prepare to stop, and proceed with caution as no one has automatic priority

Cevap

Slow down, prepare to stop, and proceed with caution as no one has automatic priority.
At an unmarked crossroads where there are no traffic lights, road signs, or road markings, no vehicle has priority. Drivers must reduce their speed, approach with caution, look carefully in all directions, and be prepared to stop.

Adım Adım Çözüm

1
Identify the junction type and road layout
Recognise that the junction is an unmarked crossroads without road signs, signals, or give-way markings
Road layouts and regulatory controls determine priority rules under the Highway Code
2
Apply Highway Code principles for uncontrolled junctions
Understand that no vehicle or driver holds an automatic right of way
Defensive driving requires anticipating that vehicles approaching from any direction may emerge
3
Determine the safe driving response
Reduce speed, scan all approaches, prepare to stop, and proceed only when clear
Ensures mutual road safety without making false assumptions about other drivers yielding

Anahtar Kavram

Unmarked crossroads priority and defensive road attitude
Tahmini Süre:45s
ÖncekiSayfa 2 / 6Sonraki
Attitude Alıştırma Soruları — UK Driving Theory Test — Sayfa 2 | Examkin