Soru

Zorluk: OrtaInfectious Diseases

A 42-year-old man presents to the emergency department with a 6-week history of chronic cough productive of blood-tinged sputum, drenching night sweats, fatigue, and an unintentional 6-kg (13-lb) weight loss. He recently immigrated to the United States from a country with a high incidence of tuberculosis. His temperature is 38.2°C (100.8°F), blood pressure is 118/76 mm Hg, pulse is 98/min, and respirations are 18/min. A portable chest radiograph performed in the triage area reveals a 3-cm cavitary lesion in the apical segment of the right upper lobe.

Arrange the following management steps in the most appropriate chronological sequence for this patient.

  1. 1Transfer the patient to an airborne infection isolation room
  2. 2Collect three consecutive sputum specimens for acid-fast bacilli smear and mycobacterial culture
  3. 3Initiate empiric therapy with isoniazid, rifampin, pyrazinamide, and ethambutol
  4. 4Discontinue airborne infection isolation precautions

Cevap

The correct sequence is: transfer to an airborne infection isolation room, collect sputum specimens, initiate empiric therapy, and finally discontinue isolation precautions once non-infectious.
In any patient presenting with symptoms and radiographic findings highly suggestive of active pulmonary tuberculosis, the primary initial concern is infection control. Thus, the patient must immediately be placed in an airborne infection isolation room (negative pressure) to prevent transmission. Once isolated, diagnostic samples (three sputum specimens for AFB smear and culture) should be collected. It is critical to obtain these specimens prior to initiating antibiotics to maximize the diagnostic yield. Following sample collection, empiric four-drug therapy (isoniazid, rifampin, pyrazinamide, ethambutol) is started due to the high probability of disease. Finally, airborne isolation can only be discontinued once the patient is deemed non-infectious, which requires clinical improvement and three consecutive negative sputum smears.

Adım Adım Çözüm

1
Transfer the patient to an airborne infection isolation room
The patient is placed in a negative-pressure environment.
This is the most urgent step to prevent aerosol transmission of Mycobacterium tuberculosis to healthcare workers and other patients.
2
Collect three consecutive sputum specimens for acid-fast bacilli smear and mycobacterial culture
Diagnostic samples are secured.
Microbiologic specimens must be obtained prior to starting antibiotics to ensure the highest yield for identifying the organism and performing drug susceptibility testing.
3
Initiate empiric therapy with isoniazid, rifampin, pyrazinamide, and ethambutol
The patient begins active treatment for tuberculosis.
Given the classic symptoms and cavitary lesion, clinical suspicion is high enough to start standard four-drug therapy immediately after securing diagnostic samples.
4
Discontinue airborne infection isolation precautions
The patient is transitioned to standard precautions.
Isolation can only be safely lifted when the patient is no longer contagious, which requires clinical improvement and three consecutive negative AFB sputum smears (collected 8-24 hours apart).

Anahtar Kavram

The management of suspected active pulmonary tuberculosis prioritizes immediate infection control (airborne isolation), followed by securing a microbiological diagnosis (sputum AFB smears/cultures), initiating targeted empiric pharmacotherapy (RIPE), and maintaining isolation until the patient is proven non-infectious.
Bu soruyu puanla