Soru

Zorluk: OrtaSurgical and Procedural Interventions

A 27-year-old man is brought to the emergency department after a high-speed motorcycle collision. On arrival, he is obtunded, and his airway is immediately secured via endotracheal intubation. Vital signs are temperature 34.8°C (94.6°F), heart rate 145/min, and blood pressure 65/40 mmHg. Breath sounds are equal bilaterally, and a portable chest radiograph is unremarkable. The pelvis is mechanically stable. An extended focused assessment with sonography for trauma (eFAST) scan shows a large amount of free fluid in the hepatorenal and splenorenal spaces, with no pericardial effusion. A massive transfusion protocol is initiated.

Arrange the following surgical and procedural interventions in the most appropriate chronological order for this patient's definitive management.

  1. 1Perform an immediate midline laparotomy to evacuate hemoperitoneum.
  2. 2Pack all four abdominal quadrants with surgical sponges.
  3. 3Sequentially remove the sponges to identify and control specific bleeding sources.
  4. 4Apply a temporary negative-pressure abdominal closure device.
  5. 5Transfer to the intensive care unit for physiologic restoration.

Cevap

The correct sequence for a damage control laparotomy in a hemodynamically unstable trauma patient is: 1) Emergency laparotomy, 2) Four-quadrant packing, 3) Sequential unpacking and hemostasis, 4) Temporary abdominal closure, and 5) ICU transfer for physiologic resuscitation.
The correct sequence outlines the standard protocol for Damage Control Laparotomy in severe trauma. The primary goal of this intervention is physiologic survival rather than definitive anatomical repair. The patient must first undergo an immediate laparotomy to access the bleeding. This is followed immediately by four-quadrant packing to halt hemorrhage and allow for initial resuscitation. Once circulating volume is partially restored, the surgeon sequentially unpacks to definitively control identified bleeding sources (e.g., vessel ligation, splenectomy, or bowel stapling). Because the patient is hypothermic and in hemorrhagic shock, the procedure is purposefully abbreviated by leaving the abdomen open with a temporary negative-pressure closure device. Finally, the patient is moved to the ICU to correct the lethal triad (hypothermia, acidosis, and coagulopathy) before returning for definitive surgical reconstruction.

Adım Adım Çözüm

1
Perform an immediate midline laparotomy
Rapid access to the abdominal cavity and evacuation of gross hemorrhage
To immediately address life-threatening intra-abdominal hemorrhage identified on the eFAST scan in a hemodynamically unstable patient.
2
Pack all four abdominal quadrants
Temporary tamponade of diffuse bleeding sources
To quickly halt blood loss and allow the anesthesia team critical time to transfuse blood products and stabilize the patient's hemodynamics.
3
Sequentially remove the sponges
Targeted identification and surgical control of specific injuries
To systematically expose and repair organ injuries or ligate bleeding vessels without releasing the life-saving tamponade on all bleeding sites simultaneously.
4
Apply a temporary negative-pressure abdominal closure device
Abdomen is left open but protected from the external environment
To prevent abdominal compartment syndrome and minimize surgical time in a patient suffering from the lethal triad.
5
Transfer to the intensive care unit
Ongoing physiologic resuscitation and monitoring
To actively warm the patient, correct acidosis, and reverse coagulopathy prior to returning to the operating room for definitive repairs 24 to 48 hours later.

Anahtar Kavram

Damage Control Laparotomy Sequence
Bu soruyu puanla