Question

Difficulty: EasyQuantitative Detail Extraction

Read the passage below:

During shipboard damage control procedures, sailors utilize the P-100 portable dewatering pump for emergency firefighting and flood control. The unit operates on standard diesel fuel and has a dry weight of 164 pounds. When drawing from sea level, the pump discharges water at a rate of 100 gallons per minute (GPM) at an operating pressure of 83 PSI. Under a high-lift scenario of 20 feet, the discharge rate decreases to 71 GPM at 62 PSI. The built-in fuel tank holds 1.45 gallons, which provides an operational run time of approximately 2.75 hours before refueling is required.

Based on the passage, match each pump specification with its exact quantitative value.

  • Dry weight of the pump unit164 pounds
  • Discharge rate under a 20-foot high-lift scenario71 gallons per minute
  • Capacity of the built-in fuel tank1.45 gallons
  • Operational run time per full tank2.75 hours

Answer

Dry weight of the pump unit matches 164 pounds; Discharge rate under a 20-foot high-lift scenario matches 71 gallons per minute; Capacity of the built-in fuel tank matches 1.45 gallons; Operational run time per full tank matches 2.75 hours.
Each pump characteristic is matched to its verbatim quantitative figure in the passage: dry weight is 164 pounds, high-lift flow rate is 71 GPM, tank capacity is 1.45 gallons, and run duration is 2.75 hours.

Step-by-Step Solution

1
Locate the sentence describing the physical characteristics of the pump unit.
Identified 'has a dry weight of 164 pounds'.
Directly links dry weight to the numerical value 164 pounds.
2
Identify the performance data associated with the 20-foot high-lift condition.
Identified 'Under a high-lift scenario of 20 feet, the discharge rate decreases to 71 GPM'.
Differentiates the high-lift discharge rate (71 GPM) from the standard sea-level rate (100 GPM).
3
Locate the fuel system details at the end of the passage.
Identified 'holds 1.45 gallons' for fuel capacity and '2.75 hours' for run time.
Associates the correct units of measurement (gallons vs. hours) with their respective metrics.

Key Concept

Quantitative Detail Extraction
Estimated Time:45s
Rate this question