All practice questions

2524 questions

Question 2041Question

A driver is traveling at 40 mph on a roadway and enters a designated school zone where active flashing yellow lights indicate a posted reduced speed limit of 25 mph. Although the road is clear and no children are visible on the sidewalk, the driver maintains a speed of 40 mph. Which of the following statements correctly describes the legal classification and consequence of this driver's action?

Show answer & explanation

Answer: The driver has committed a serious moving violation for exceeding the posted speed limit in an active school zone, regardless of whether pedestrians are present.

Answer

The driver has committed a serious moving violation for exceeding the posted speed limit in an active school zone, regardless of whether pedestrians are present.
When school zone signals or posted times are active, the specified speed limit becomes a mandatory statutory requirement. Exceeding this limit by 15 mph is classified as a serious moving traffic violation, punishable by fines and license points, regardless of whether pedestrians are visible on the sidewalk.

Step-by-Step Solution

1
Identify the regulatory status of the school zone.
The active flashing yellow lights signal that the mandatory reduced speed limit of 25 mph is in effect.
Drivers must recognize that active indicators make the posted speed limit legally binding.
2
Evaluate the driver's defense regarding environmental conditions.
Lack of visible pedestrians or clear weather does not grant an exemption to active statutory school zone speed limits.
School zone limits exist to protect vulnerable road users and require strict compliance whenever activated.
3
Determine the legal classification of the offense.
Operating 15 mph over an active school zone limit constitutes a serious moving violation and point addition.
Exceeding speed limits in designated safety zones carries elevated legal penalties.

Key Concept

School Zone Speed Compliance and Moving Violation Classifications
Question 2042Question

You are driving toward an intersection controlled by a traffic light that is displaying a solid red signal. A law enforcement officer directing traffic in the center of the intersection explicitly signals for you to proceed forward. Meanwhile, a vehicle on the cross street is entering the intersection facing a solid green light. What is the correct action to take?

Show answer & explanation

Answer: Follow the officer's direction and proceed through the intersection, as traffic officer signals override automated traffic signals.

Answer

Follow the officer's direction and proceed through the intersection cautiously, because instructions from a traffic officer override electronic traffic lights and posted signs.
Directions given by an authorized traffic officer or law enforcement official take priority over all automated traffic signals, posted regulatory signs, and standard right-of-way rules. When an officer signals you to proceed through a solid red light, you must follow the officer's instructions cautiously.

Step-by-Step Solution

1
Identify the primary authority controlling traffic at the intersection.
Recognize that a law enforcement officer is actively directing traffic on scene.
Under state motor vehicle codes, manual signals from authorized personnel override automated traffic control devices.
2
Evaluate conflict between the red signal light and the officer's hand gesture.
Determine that the officer's explicit signal to proceed overrides the solid red light.
Officers manage real-time intersection safety and override normal right-of-way rules and signal states.
3
Execute the required driving maneuver safely.
Proceed through the intersection cautiously as directed by the officer.
Yielding to traffic light colors or cross-street vehicles when directed by an officer creates confusion and collision hazards.

Key Concept

Traffic Officer Signal Priority
Question 2043Question

Under standard motor vehicle safety equipment and inspection regulations, every motor vehicle operated on public roadways must be equipped with a working horn capable of emitting sound audible under normal conditions from a distance of at least 200 feet.

Show answer & explanation

Answer: True

Answer

True
Standard motor vehicle safety codes mandate that a horn must be in good working order and audible under normal conditions from a minimum distance of 200 feet.

Step-by-Step Solution

1
Identify the specific vehicle equipment safety requirement being evaluated.
The requirement focuses on mandatory horn installation and its minimal operational audibility distance.
Official motor vehicle inspection standards establish performance benchmarks for warning devices.
2
Verify the standard legal threshold for horn audibility.
Standard motor vehicle codes specify that a vehicle horn must be audible from at least 200 feet under normal conditions.
This distance provides adequate acoustic warning to nearby vehicles and pedestrians to prevent collisions.

Key Concept

Mandatory Horn Equipment and Audibility Standards
Question 2044Question

A driver facing a flashing red arrow signal in a turning lane must come to a complete stop before entering the intersection and yield right-of-way to oncoming traffic and pedestrians before proceeding.

Show answer & explanation

Answer: True

Answer

The statement is true. A flashing red arrow signal mandates a complete stop prior to making the turn, followed by yielding the right-of-way to all opposing traffic and pedestrians.
The statement accurately reflects standard traffic law: a flashing red arrow requires a complete stop before turning, allowing movement only after yielding to all conflicting traffic and pedestrians.

Step-by-Step Solution

1
Identify the signal type and direction
The signal displayed is a flashing red arrow targeting turning traffic.
Traffic signal rules differentiate between solid and flashing indications as well as circular versus arrow lenses.
2
Apply the legal rule governing flashing red traffic signals
A flashing red indication (arrow or solid light) legally requires a full and complete stop before crossing the stop bar or entering the crosswalk.
Flashing red signals operate under the same legal standard as a posted stop sign.
3
Determine the right-of-way procedure after stopping
The driver may proceed in the direction of the arrow only after yielding to pedestrians and oncoming traffic that poses an immediate hazard.
The arrow provides an unprotected turn opportunity after full compliance with the stop-and-yield requirement.

Key Concept

Flashing Red Arrow Signal Compliance
Question 2045Question

You are driving in the right lane of a multi-lane road approaching an intersection and observe that the broken white lines separating your lane from the adjacent lane have transitioned into a single solid white line. Which of the following best describes the rules for crossing this pavement marking?

Show answer & explanation

Answer: Crossing a single solid white line is discouraged, and drivers should stay in their lane unless special hazards require a lane change.

Answer

Crossing a single solid white line is discouraged, and drivers should stay in their lane unless special hazards require a lane change.
The correct answer states that crossing a single solid white line is discouraged and drivers should stay in their lane unless avoiding a hazard. Single solid white lines are used between lanes moving in the same direction to indicate that lane changes are discouraged, particularly in areas near intersections or traffic chokepoints where changing lanes creates additional conflict points.

Step-by-Step Solution

1
Identify the direction of travel indicated by white pavement markings.
White lines separate lanes of traffic traveling in the same direction.
Yellow lines separate opposing traffic, whereas white lines designate same-direction lanes.
2
Analyze the meaning of a single solid line pattern versus broken or double solid lines.
A single solid line signals that changing lanes requires extra caution and is discouraged, whereas double solid white lines prohibit changing lanes completely.
Solid lines indicate restricted maneuverability, but single solid white lines serve as advisory restrictions encouraging drivers to maintain their lanes.
3
Evaluate the intersection context and legal passing prohibitions.
Passing near intersections is generally unsafe and prohibited within 100 feet, making lane maintenance critical.
Lane changes directly before an intersection increase collision risks with turning or stopping vehicles.

Key Concept

Single Solid White Pavement Markings
Estimated Time:1m 0s
Question 2046Question

You are approaching an intersection facing a solid green light and planning to turn left. An oncoming vehicle is approaching from the opposite direction traveling straight through the intersection. Which driver must yield the right-of-way?

Show answer & explanation

Answer: You must yield the right-of-way to the oncoming vehicle going straight.

Answer

You must yield the right-of-way to the oncoming vehicle going straight.
When turning left at a solid green light, the turn is unprotected, meaning you must yield the right-of-way to any oncoming vehicles proceeding straight through the intersection.

Step-by-Step Solution

1
Identify the intersection signal and vehicle intentions.
You are making a left turn under a solid green light (unprotected turn) while an oncoming car is moving straight.
Determining the turn type and traffic movement establishes which right-of-way rule applies.
2
Apply standard DMV right-of-way rules for left turns at signalized intersections.
Drivers turning left across oncoming traffic must yield to vehicles traveling straight through.
Solid green lights grant right-of-way to straight-through traffic over left-turning traffic.

Key Concept

Unprotected Left Turn Yielding Rules
Question 2047Question

A motorist is driving on an unlit rural highway at night where the posted maximum speed limit is 50 mph50\text{ mph}. According to speed regulation laws and safe driving principles, how should the driver determine their maximum safe operating speed under these conditions?

Show answer & explanation

Answer: Adjust speed so that the vehicle can come to a complete stop within the distance visible by the vehicle's headlights.

Answer

Adjust speed so that the vehicle can come to a complete stop within the distance visible by the vehicle's headlights.
The correct answer highlights the primary rule of nighttime speed regulation: drivers must never 'overdrive' their headlights. Operating at a speed that allows stopping within the clear distance illuminated ahead ensures the driver can react to unexpected hazards in the dark.

Step-by-Step Solution

1
Identify the environmental constraint affecting safe driving speed.
Nighttime driving on an unlit road significantly reduces forward visibility.
Headlights only illuminate a limited distance ahead of the vehicle.
2
Apply the Basic Speed Law to nighttime driving conditions.
The driver must operate at a speed that permits stopping within the illuminated distance (avoiding 'overdriving' headlights).
If a hazard appears at the edge of headlight reach, traveling too fast prevents stopping in time.

Key Concept

Basic Speed Law and Nighttime Speed Regulation (Overdriving Headlights)
Estimated Time:1m 0s
Question 2048Question

When being overtaken and passed by another vehicle on a two-lane road, a driver is legally permitted to increase their speed to prevent the passing vehicle from completing the maneuver.

Show answer & explanation

Answer: False

Answer

False
The statement is false. When being passed on a two-lane road, drivers are required by law to maintain their speed (or reduce speed if necessary to allow the passing vehicle to safely merge back) and must never accelerate to prevent another vehicle from passing.

Step-by-Step Solution

1
Identify the traffic scenario presented.
The scenario describes a driver increasing their speed while another vehicle is overtaking and passing them on a two-lane road.
Understanding the specific action being evaluated is necessary to apply traffic laws correctly.
2
Recall the legal duties of a driver being passed.
Traffic rules require the driver being passed to maintain a constant speed or yield slightly, staying in their lane until the overtaking vehicle safely completes the pass.
Speeding up lengthens the time the passing vehicle remains in the opposing traffic lane, dramatically increasing the danger of a head-on crash.
3
Determine the legal accuracy of the statement.
The statement claims it is legally permitted to speed up, which directly contradicts traffic law.
Since the action is illegal and dangerous, the statement is false.

Key Concept

Duties of a Driver Being Passed
Question 2049Question

When driving in adverse weather conditions such as heavy rain, fog, or snow, a driver is legally required to reduce their speed below the posted maximum limit if traveling at the posted limit is unsafe for those conditions.

Show answer & explanation

Answer: True

Answer

The statement is true. Drivers must adjust their speed down from the posted maximum when weather or road conditions create hazardous driving environment.
The statement is true because the Basic Speed Law states that a driver must never operate a vehicle at a speed greater than is reasonable and prudent for existing weather, traffic, and road conditions.

Step-by-Step Solution

1
Identify the relationship between posted speed limits and environmental conditions.
Posted speed limits represent the maximum allowable speed under ideal driving conditions.
Traffic laws establish posted limits as maximum boundaries under clear and dry conditions.
2
Apply the Basic Speed Law to adverse conditions.
Driving at the posted maximum during adverse weather (rain, fog, snow) violates traffic safety rules if it compromises control or stopping distance.
The Basic Speed Law mandates safe speed selection based on real-time hazards.

Key Concept

Basic Speed Law in Hazardous Weather Conditions
Question 2050Question

You are approaching a signalized intersection where the traffic light is displaying a solid red light. A uniformed law enforcement officer standing in the center of the intersection is actively gesturing for your lane of traffic to proceed straight through. On the cross street, vehicles are facing a solid green light and preparing to cross. Which traffic flow has the immediate right-of-way to proceed through the intersection?

Show answer & explanation

Answer: The lane of traffic directed by the law enforcement officer, because manual directions from an officer supersede traffic lights and standard right-of-way rules

Answer

The lane directed by the police officer has immediate right-of-way because officer hand gestures override all automated traffic signals and standard yielding rules.
In state driving manuals and traffic law, orders given by a police officer or authorized traffic controller supersede all posted traffic control devices, including green and red lights. Drivers instructed by an officer to move through a red light must obey the officer while maintaining reasonable caution.

Step-by-Step Solution

1
Identify the hierarchy of traffic control devices and authority present at the intersection.
Recognize that a live uniformed officer is directing traffic directly opposite to the static signal lights.
Traffic law establishes a strict hierarchy where official manual control by an officer supersedes electronic signals, stop signs, and yield rules.
2
Evaluate the conflict between the officer's instruction and cross-traffic green lights.
Determine that cross-traffic must yield to traffic acting under the explicit command of the law enforcement officer.
Drivers facing a green light must still yield to traffic already lawfully directed into or through the intersection by an authorized officer.
3
Formulate the correct driving procedure.
Proceed cautiously through the intersection following the officer's hand gesture while remaining alert for hazards.
Obeying lawful officer instructions ensures safe traffic control during special events, emergencies, or signal malfunctions.

Key Concept

Traffic Officer Signal Precedence
Estimated Time:1m 30s
Question 2051Question

When parking a passenger vehicle on a paved street facing downhill next to a concrete curb, in which direction should the driver turn the front wheels?

Show answer & explanation

Answer: Toward the curb

Answer

The driver should turn the front wheels toward the curb.
When facing downhill next to a curb, turning the front wheels toward the curb causes the vehicle's front tire to make contact with and be blocked by the curb if the brakes release, preventing the vehicle from rolling down the street.

Step-by-Step Solution

1
Analyze the vehicle orientation and road features
The vehicle is parked facing downhill alongside a concrete curb.
The direction of downhill slope combined with the presence of a physical curb determines how tire contact will prevent vehicle movement.
2
Determine the wheel direction that engages the curb as a physical barrier
Turning the front wheels toward the curb ensures the tire rolls into the curb.
Should the parking brake fail, forward movement causes the front tire to press against the curb immediately, holding the vehicle safely in place.

Key Concept

Hill Parking Regulations and Wheel Positioning
Question 2052Question

During an official motor vehicle safety inspection, an inspector evaluates the vehicle's rear lighting system and registration plate illumination. Which of the following conditions violates mandatory safety equipment standards and will cause the vehicle to fail inspection?

Show answer & explanation

Answer: A white license plate light that is burned out, rendering the rear registration plate illegible from 50 feet away.

Answer

A white license plate light that is burned out, rendering the rear registration plate illegible from 50 feet away.
Motor vehicle safety standards mandate a functioning white light that illuminates the rear registration plate so that it is clearly legible from a distance of at least 50 feet. A burned-out bulb prevents proper identification of the vehicle at night and results in an inspection failure.

Step-by-Step Solution

1
Identify legal equipment mandates for vehicle registration plate lighting.
Motor vehicle regulations mandate that all motor vehicles must be equipped with a functional white license plate light.
The license plate light ensures clear visibility and legibility of the rear license plate from a minimum required distance of 50 feet during nighttime operation.
2
Evaluate the compliance of alternative rear lighting conditions.
Amber rear turn signals, simultaneous taillight/headlight operation, and functioning center brake lights are all legally compliant and mandatory or approved configurations.
Only non-functioning required lamps (such as a burned-out license plate light) fail official vehicle safety inspection criteria.

Key Concept

Mandatory License Plate Light Visibility Requirement
Estimated Time:1m 0s
Question 2053Question

When a traffic signal displays a steady green arrow for a dedicated left-turn lane at an intersection, the driver turning left must yield the right-of-way to oncoming traffic proceeding straight.

Show answer & explanation

Answer: False

Answer

False. A steady green arrow indicates a protected left turn, granting right-of-way to the turning vehicle because oncoming traffic faces a solid red signal.
The statement is false because a steady green arrow designates a protected turn phase. Under standard traffic laws, oncoming traffic faces a red signal while the green arrow is displayed, allowing the left-turning driver to proceed without yielding to oncoming straight-through vehicles.

Step-by-Step Solution

1
Identify the type of traffic signal indicated in the scenario
The signal is a steady green arrow pointing left.
Traffic control laws distinguish between protected signals (arrows) and permissive/unprotected signals (solid circular green lights).
2
Determine the right-of-way priority associated with a green arrow signal
A green arrow grants a protected turn phase, meaning oncoming straight-through traffic is held by a red light.
Standard DMV traffic regulations establish that protected movements have right-of-way over opposing through movements.
3
Evaluate the truth of the assertion
The statement asserts that left-turning drivers on a green arrow must yield to oncoming traffic, which is incorrect.
Because yielding to oncoming traffic is only required during an unprotected turn (solid green circle), the assertion is false.

Key Concept

Protected vs. Unprotected Left Turn Right-of-Way Rules
Question 2054Question

Drivers entering a traffic circle or roundabout have the right-of-way over vehicles already traveling inside the roundabout.

Show answer & explanation

Answer: False

Answer

The statement is false. Drivers approaching a roundabout must yield the right-of-way to vehicles already traveling inside the traffic circle.
Entering drivers must slow down or yield to traffic already in the roundabout. Priority belongs to vehicles already inside the intersection to maintain continuous traffic movement.

Step-by-Step Solution

1
Identify the type of intersection and the rule being evaluated.
The scenario concerns right-of-way priority between vehicles entering a roundabout and vehicles already circulating inside.
Standard traffic regulations define clear yielding rules for circular intersections.
2
Apply standard traffic law regarding roundabout entry.
Drivers entering a roundabout must yield to traffic already in the circle.
Circulating vehicles have established priority to ensure smooth traffic flow and prevent gridlock.

Key Concept

Right-of-Way Rules at Roundabouts
Question 2055Question

At an uncontrolled T-intersection where no stop signs, yield signs, or traffic signals are present, a driver traveling on the terminating road must yield the right-of-way to all vehicles traveling on the continuous through road.

Show answer & explanation

Answer: True

Answer

True. At an uncontrolled T-intersection, the driver on the terminating road must yield the right-of-way to through traffic on the continuous road.
The statement accurately reflects state DMV right-of-way regulations: when approaching an uncontrolled T-intersection, vehicles on the street that ends must yield to all traffic traveling on the continuous through street.

Step-by-Step Solution

1
Identify the intersection type and control status
The scenario describes an uncontrolled T-intersection (a three-way intersection with no signals, stop signs, or yield signs).
Right-of-way priority is determined by intersection design when control devices are absent.
2
Apply the statutory T-intersection right-of-way rule
Vehicles on the terminating street (the street that ends) must yield to vehicles on the continuous street (the top of the 'T').
Traffic flow on continuous roadways has legal precedence over traffic entering from a terminating street.
3
Evaluate the statement's accuracy
The statement correctly assets that the terminating road driver must yield to through traffic.
The driver on the terminating road does not share equal right-of-way and must yield to vehicles approaching from both the left and right on the continuous road.

Key Concept

Right-of-way rules at uncontrolled T-intersections
Estimated Time:1m 30s
Question 2056Question

A driver preparing to change lanes on a multi-lane roadway checks both the rearview mirror and side mirrors. Why is a physical shoulder check still required before executing the lane change?

Show answer & explanation

Answer: To identify vehicles located in blind spots that cannot be seen in the mirrors

Answer

To identify vehicles located in blind spots that cannot be seen in the mirrors
Rearview and side-view mirrors leave areas around the vehicle's rear sides unobserved, known as blind spots. Looking over the shoulder before changing lanes is necessary to ensure no vehicle is traveling in these unobserved zones.

Step-by-Step Solution

1
Identify mirror limitations
Rearview and side mirrors leave unobserved visual gaps around the rear sides of the vehicle.
Mirrors provide a limited field of view behind the vehicle.
2
Determine the role of the shoulder check
Turning one's head directly looks into the vehicle's blind spots.
Direct visual checks prevent side-collision accidents with adjacent traffic.

Key Concept

Blind Spot Verification During Lane Changing
Question 2057Question

You are driving on a two-lane highway and notice that the centerline changes from a single broken yellow line to a double line consisting of a solid yellow line on your side and a broken yellow line on the opposite side. Which maneuver are you legally permitted to execute under these road conditions?

Show answer & explanation

Answer: You may cross the centerline to turn left into a private driveway if traffic is clear, but you may not cross to pass another vehicle.

Answer

You may cross the centerline to turn left into a private driveway if traffic is clear, but you may not cross to pass another vehicle.
When a solid yellow line is painted on your side of the centerline, passing or overtaking other vehicles is prohibited. However, traffic regulations permit drivers to cross a solid yellow line when executing a left turn into or out of a private driveway, alleyway, or private road, provided the maneuver can be completed safely.

Step-by-Step Solution

1
Identify the pavement marking adjacent to your travel lane.
The line immediately next to your lane is a solid yellow line.
Traffic laws dictate that your actions are governed by the pavement line on your side of the centerline.
2
Determine passing permissions for a solid yellow line.
Overtaking or passing other vehicles is prohibited.
A solid yellow line designates a no-passing zone for traffic travelling in that lane.
3
Identify statutory exceptions for crossing a solid yellow centerline.
Crossing is legally permitted to make a left turn into a driveway, alley, or private road when clear.
No-passing restrictions apply specifically to overtaking movements, not to necessary turn maneuvers across the road.

Key Concept

Solid vs. Broken Centerline Regulations
Question 2058Question

You are driving on a roadway with a posted speed limit of 45 mph45\text{ mph}, but traffic has become extremely heavy and congested, forcing vehicles to slow down significantly. According to traffic safety laws, how should you regulate your speed in this scenario?

Show answer & explanation

Answer: Adjust your speed downward to safely match the heavy traffic flow, regardless of the posted 45 mph45\text{ mph} maximum limit.

Answer

Adjust your speed downward to safely match the heavy traffic flow, regardless of the posted 45 mph45\text{ mph} maximum limit.
The Basic Speed Law dictates that a driver must never drive faster than is safe for current road, weather, and traffic conditions. When traffic is congested, driving at a reduced speed that maintains a safe following distance is legally required, even if it is well below the posted maximum limit.

Step-by-Step Solution

1
Identify the existing traffic conditions and posted limits
The road has heavy, congested traffic and a maximum posted speed limit of 45 mph45\text{ mph}.
Safe speed selection depends on both posted statutory rules and real-time environment factors.
2
Apply the Basic Speed Law rule
The law requires driving at a safe, reasonable speed for current conditions, even if that speed is below the posted maximum limit.
Driving at the maximum posted limit in dense traffic creates a high risk of rear-end collisions.

Key Concept

Basic Speed Law in Heavy Traffic
Question 2059Question

A driver traveling on a two-lane road accelerates into the opposing lane to overtake a slower vehicle while approaching within 100 feet of an intersection. Which of the following statements correctly evaluates the legal status of this maneuver?

Show answer & explanation

Answer: The maneuver is illegal because drivers are prohibited from driving on the left side of the road to pass when within 100 feet of an intersection.

Answer

The maneuver is illegal because drivers are prohibited from driving on the left side of the road to pass when within 100 feet of an intersection.
Under traffic safety laws, operating a vehicle on the left side of the roadway to overtake another vehicle within 100 feet of an intersection is a serious moving violation due to the high risk of broadside collisions with turning or cross-traffic.

Step-by-Step Solution

1
Identify the key physical location and driving maneuver described in the scenario.
The driver is attempting to pass another vehicle in the opposing traffic lane within 100 feet of an intersection.
Traffic safety codes establish specific distance-based restrictions near high-risk conflict points like intersections, railroad crossings, and bridges.
2
Apply statutory rules regarding passing and lane usage near intersections.
Standard vehicle codes specify that no vehicle shall be driven to the left side of the roadway when approaching or traversing within 100 feet of an intersection.
Vehicles entering or turning at intersections cannot safely anticipate oncoming traffic in their lane from overtaking maneuvers.

Key Concept

Distance restrictions for overtaking near intersections and hazardous zones
Estimated Time:1m 0s
Question 2060Question

You are driving on a two-lane highway behind a slow-moving truck. Although the pavement marking on your side is a broken yellow line, you notice a steep hill crest approaching ahead. Under standard traffic laws, which rule governs your ability to pass in this situation?

Show answer & explanation

Answer: You must not pass if your line of sight is obstructed by the hill crest, despite the broken yellow line.

Answer

Drivers must not initiate a pass when approaching a hill crest or any point where sight distance is restricted, even if pavement markings normally allow passing.
Traffic safety laws strictly prohibit passing on two-lane roads whenever a hill crest, curve, or other physical obstruction prevents a clear view of oncoming traffic. Even if pavement lines are broken, driver visibility and real-time safety dictate whether passing is lawful.

Step-by-Step Solution

1
Evaluate the visibility conditions ahead on the roadway.
Identified a hill crest that limits view of potential oncoming traffic.
Safe passing requires clear sight distance to verify that the oncoming lane is unoccupied.
2
Apply statutory rules regarding passing near hazards and sight restrictions.
Determined that passing is prohibited whenever sight distance is restricted by terrain features such as hills or curves.
Pavement markings do not supersede the fundamental requirement to maintain clear line-of-sight before entering oncoming lanes.

Key Concept

Sight distance restrictions and terrain hazards override permissive pavement markings during passing maneuvers.
PreviousPage 103 / 127Next
All practice questions — DMV Permit Practice Test | Examkin