All practice questions

2524 questions

Question 2061Question

You are driving straight on a through street and approaching an uncontrolled T-intersection, where a side street ends at your road. A car on the terminating side street reaches the intersection at the same time and intends to turn onto your street. Which vehicle has the right-of-way?

Show answer & explanation

Answer: The vehicle traveling on the through street has the right-of-way, so the driver on the terminating road must yield.

Answer

The vehicle traveling on the through street has the right-of-way, so the driver on the terminating road must yield.
Under standard traffic laws, at an uncontrolled T-intersection, drivers on the street that ends must yield the right-of-way to all vehicles traveling on the continuing through road.

Step-by-Step Solution

1
Identify the intersection layout and control type.
The scenario describes an uncontrolled T-intersection where one road ends at a through street.
Different right-of-way rules apply depending on whether the intersection is a standard 4-way, controlled by signs/signals, or a T-intersection.
2
Apply the T-intersection right-of-way rule.
Drivers on the terminating street must yield right-of-way to vehicles traveling on the continuing through street.
Traffic flow on through streets has legal priority over vehicles entering from ending side streets.

Key Concept

Right-of-Way at Uncontrolled T-Intersections
Question 2062Question

You are driving on a street that ends at an uncontrolled T-intersection (an intersection with no stop signs, yield signs, or traffic signals). As you reach the intersection intending to turn left, another vehicle is approaching on the through street from your right. Who has the right-of-way at this T-intersection?

Show answer & explanation

Answer: The vehicle traveling on the through street has the right-of-way.

Answer

The vehicle traveling on the through street has the right-of-way.
At an uncontrolled T-intersection, vehicles traveling on the continuing through street have right-of-way over vehicles approaching on the terminating road. Drivers on the ending street must yield until traffic on the through street clears.

Step-by-Step Solution

1
Identify the type of intersection described in the scenario.
The scenario describes an uncontrolled T-intersection where a terminating street meets a continuous through street.
Different right-of-way rules apply depending on whether an intersection is a multi-leg intersection or a T-intersection.
2
Apply the statutory right-of-way rule for T-intersections.
Drivers on the terminating road must yield the right-of-way to all vehicles traveling on the through street.
Traffic flow on through streets takes precedence over traffic entering from a street that ends.
3
Determine which driver must yield.
You are on the terminating street, so you must yield to the vehicle traveling on the through street before executing your turn.
This ensures safe entry onto the main road without forcing through traffic to alter speed or direction.

Key Concept

Right-of-Way at Uncontrolled T-Intersections
Estimated Time:1m 0s
Question 2063Question

A driver traveling along a two-lane rural roadway intends to execute a left turn into a private residential driveway. An oncoming vehicle is approaching from the opposite direction, and traffic is following behind. Which of the following correctly describes the driver's legal requirements regarding signaling and right-of-way priority prior to initiating the turn?

Show answer & explanation

Answer: Signal continuously for at least 100 feet prior to the turn, and yield the right-of-way to all oncoming vehicles until it is safe to cross.

Answer

Signal continuously for at least 100 feet prior to the turn, and yield the right-of-way to all oncoming vehicles until it is safe to cross.
The correct option outlines both mandatory duties: drivers must give continuous advance intent notice by signaling at least 100 feet before the turning point, and must yield to all oncoming traffic until a safe gap allows completion of the left turn.

Step-by-Step Solution

1
Determine the required signaling distance requirement.
Standard traffic safety regulations require drivers to activate their turn signal continuously for a minimum of 100 feet before executing any turn or lane change.
Advance signaling alerts trailing and oncoming motorists to the planned deceleration and maneuver.
2
Determine right-of-way priority when making a left turn into a driveway.
Any vehicle making a left turn across oncoming lanes of traffic must yield the right-of-way to all approaching vehicles traveling straight from the opposite direction.
Vehicles continuing straight in their established lane of travel hold right-of-way priority over turning vehicles.

Key Concept

Continuous Turn Signaling and Left Turn Right-of-Way Rules
Question 2064Question

You approach an uncontrolled four-way intersection intending to proceed straight. At the exact same moment, a car reaches the intersection from the cross street to your left, also intending to go straight. Simultaneously, a pedestrian begins crossing the street directly in front of your lane within a marked crosswalk. Under standard right-of-way rules, what is the correct order of precedence for these road users?

Show answer & explanation

Answer: The pedestrian proceeds first, followed by your vehicle, and finally the vehicle on your left.

Answer

The pedestrian proceeds first, followed by your vehicle, and finally the vehicle on your left.
Pedestrians in crosswalks maintain supreme right-of-way over motor vehicles. Once the pedestrian safely clears your path, vehicular right-of-way rules dictate that when two vehicles arrive simultaneously at an uncontrolled intersection, the driver on the left yields to the driver on the right. Therefore, you proceed before the vehicle on your left.

Step-by-Step Solution

1
Evaluate vulnerable road user right-of-way priority.
Pedestrians lawfully inside marked crosswalks hold primary right-of-way over all turning or straight-through vehicular traffic.
Traffic laws strictly require motor vehicles to yield to pedestrians in designated crosswalks.
2
Evaluate vehicle-to-vehicle priority at the uncontrolled intersection.
When two vehicles reach an uncontrolled intersection at the same time, the vehicle on the left must yield to the vehicle on the right.
You are positioned to the right of the other vehicle, giving your vehicle right-of-way priority over it.
3
Synthesize the complete crossing order.
1st: Pedestrian crosses. 2nd: Your vehicle proceeds through the intersection. 3rd: The vehicle on your left proceeds.
Combining pedestrian priority and the right-of-way rule for simultaneous arrivals yields this sequence.

Key Concept

Multi-party right-of-way evaluation at uncontrolled intersections involving pedestrians
Estimated Time:1m 30s
Question 2065Question

Under traffic safety law, a conviction for reckless driving requires proof that a motorist operated a vehicle with willful or wanton disregard for the safety of persons or property, distinguishing it from minor moving violations and carrying potential criminal penalties.

Show answer & explanation

Answer: True

Answer

True
The statement is true because reckless driving is explicitly defined by the presence of willful or wanton disregard for the safety of people or property. This elevated mental state sets reckless driving apart from minor traffic violations, categorizing it as a serious criminal offense that subjects the driver to license suspension, fines, and potential imprisonment.

Step-by-Step Solution

1
Examine the legal standard required to establish reckless driving.
Reckless driving requires evidence of willful or wanton disregard for public safety.
Simple inadvertence or minor errors do not meet the threshold of wanton disregard.
2
Evaluate the legal classification and severity of penalties for reckless driving.
Unlike minor traffic infractions, reckless driving is classified as a serious moving violation carrying criminal penalties and administrative licensing actions.
The severe threat to public safety warrants criminal prosecution and mandatory driver license sanctions.

Key Concept

Legal Standard and Penalties for Reckless Driving
Question 2066Question

A driver traveling on a two-lane, two-way highway intends to pass a slower vehicle ahead. Arrange the following actions in the correct sequential order from first to last to complete the passing maneuver safely and legally.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct sequence is: 1) Check road markings and oncoming traffic, 2) Signal left and check mirrors and blind spots, 3) Move into passing lane, overtake vehicle, and signal right, 4) Check rearview mirror for passed vehicle's headlights before returning to the right lane.
The correct sequence begins by evaluating forward roadway safety and legal pavement markings. Next, the driver signals left and performs mirror and blind spot checks to ensure traffic behind is clear. The driver then moves into the left passing lane, completes the pass legally without speeding, and signals right. Finally, after confirming sufficient separation distance by seeing both headlights of the passed vehicle in the inside rearview mirror, the driver returns smoothly to the right lane.

Step-by-Step Solution

1
Assess forward road conditions and pavement markings
Verified that passing is legal (e.g., broken yellow line) and that the oncoming lane is free of approaching vehicles.
Passing cannot be safely or legally initiated without clear sight distance and proper road markings.
2
Signal left turn and verify clear rear space
Turned on the left directional indicator and checked rearview mirror, side mirror, and left blind spot.
Communicates intention to surrounding drivers and ensures no vehicle behind is already overtaking.
3
Execute the overtake maneuver
Steered into the left lane, accelerated past the slower vehicle within legal speed limits, and activated the right turn signal.
Completes the pass efficiently and alerts traffic of the return merge.
4
Confirm safe clearance and return to the lane
Observed both headlights of the overtaken vehicle in the inside rearview mirror before steering back into the right lane.
Guarantees a safe distance cushion so the passed vehicle is not cut off.

Key Concept

Safe Passing Procedure on Two-Lane Roads
Question 2067Question

Four vehicles arrive at an intersection controlled by four-way stop signs under different conditions. Place the vehicles in the correct order in which they have the right-of-way to proceed through the intersection legally.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct order of proceeding through the intersection is: 1) Emergency ambulance with active siren/lights, 2) Sedan that stopped first among non-emergency vehicles, 3) Pickup truck proceeding straight after simultaneous arrival, 4) Coupe turning left after yielding to oncoming straight traffic.
Right-of-way rules establish a clear hierarchy: active emergency vehicles hold absolute priority first. Next, multi-way stop rules grant precedence to whichever non-emergency vehicle stopped first (the sedan). Finally, when remaining vehicles arrive simultaneously, straight-through traffic (the pickup truck) has precedence over left-turning traffic (the coupe), placing the turning vehicle last.

Step-by-Step Solution

1
Identify emergency vehicles with active warning devices
The ambulance with active sirens and lights takes absolute precedence over all other vehicles.
State traffic laws mandate yielding right-of-way to active emergency vehicles immediately.
2
Apply the 'first to arrive, first to proceed' rule for standard vehicles
The sedan proceeds next.
At multi-way stop intersections, non-emergency vehicles gain right-of-way in chronological order of arrival.
3
Resolve right-of-way between vehicles arriving simultaneously
The pickup truck going straight proceeds before the left-turning coupe.
Drivers making a left turn must yield to oncoming traffic moving straight through an intersection when arriving at the same time.

Key Concept

Right-of-Way Hierarchy at Multi-Way Stop Intersections
Estimated Time:1m 30s
Question 2068Question

Under mandatory financial responsibility laws, minimum required automobile liability insurance covers bodily injuries and property damage sustained by the policyholder and their own vehicle when the policyholder is at fault in a collision.

Show answer & explanation

Answer: False

Answer

False
The statement is false because mandatory automobile liability insurance covers damages and injuries suffered by third parties in an at-fault crash, not the policyholder's own vehicle or personal injuries.

Step-by-Step Solution

1
Identify the purpose of state mandatory financial responsibility laws.
State laws require drivers to carry liability insurance to ensure they can financially compensate other road users for damages or injuries they cause.
Mandatory financial responsibility protects the public from uninsured losses in traffic collisions.
2
Distinguish third-party liability coverage from first-party property and medical coverage.
Liability coverage applies exclusively to third parties, whereas coverage for the driver's own vehicle requires collision or comprehensive policies.
Confusing liability coverage with full coverage is a common misconception among motor vehicle operators.

Key Concept

Scope of Mandatory Automobile Liability Coverage
Question 2069Question

Three vehicles arrive at an intersection controlled by four-way stop signs at different times. Arrange the vehicles in the correct order of precedence for proceeding through the intersection, starting with the vehicle that has the right-of-way first.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

Vehicle A proceeds first, followed by Vehicle B, and finally Vehicle C.
At an intersection controlled by four-way stop signs, precedence is established strictly by order of arrival. The driver who comes to a complete stop first has the right-of-way to enter the intersection first. Subsequent vehicles proceed in the exact sequence in which they arrived and stopped.

Step-by-Step Solution

1
Identify the right-of-way rule for a multi-way stop intersection.
Right-of-way is determined by the arrival order at the stop line.
Standard DMV traffic rules specify that drivers proceed through a multi-way stop on a first-come, first-served basis.
2
Sequence the vehicles based on their stopping order.
Vehicle A (first) -> Vehicle B (second) -> Vehicle C (third).
Each driver must yield the right-of-way to any vehicle that arrived and came to a complete stop prior to them.

Key Concept

First-Come, First-Served Right-of-Way at Multi-Way Stop Intersections
Estimated Time:45s
Question 2070Question

When driving through a designated school zone while children are present outside or crossing the street, the statutory speed limit is 25 mph25\text{ mph} unless traffic signs specify a different limit.

Show answer & explanation

Answer: True

Answer

The statement is True.
The statement is correct because traffic safety laws enforce a baseline statutory speed limit of 25 mph25\text{ mph} in designated school zones while children are present or crossing, unless a different speed limit is explicitly posted.

Step-by-Step Solution

1
Identify the driving environment and regulatory context
The vehicle is operating in a school zone where children are present outside or crossing.
School zones require strict statutory speed controls due to heightened pedestrian risks.
2
Evaluate standard statutory speed limit rules for school areas
Standard traffic codes define 25 mph25\text{ mph} as the default statutory speed limit in active school zones unless posted otherwise.
Motor vehicle regulations establish 25 mph25\text{ mph} as the baseline legal speed requirement to ensure reaction time near school grounds.

Key Concept

School Zone Statutory Speed Limits
Question 2071Question

A motorist driving on a multi-lane city roadway needs to make a right turn at an upcoming intersection where a dedicated bicycle lane runs along the right curb. Place the following operational steps in the correct chronological order from first step to final step.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct sequence for making a right turn across a bicycle lane is: First, check mirrors and the right blind spot for cyclists; Second, activate the right-turn signal at least 100 feet before the intersection; Third, merge into the bicycle lane within 200 feet of the intersection after yielding to bicycle traffic; Fourth, slow down and yield to pedestrians in the crosswalk; Fifth, complete the right turn into the rightmost travel lane.
Executing a safe right turn across a bicycle lane requires a logical sequence of safety and legal checks: first observing hazards in blind spots, next giving proper advance signal warning, then positioning the vehicle legally into the bike lane (yielding to cyclists), subsequently yielding to pedestrians, and finally completing the maneuver in the correct lane.

Step-by-Step Solution

1
Perform hazard scan and shoulder check
Driver establishes situational awareness and confirms the right blind spot and bicycle lane are clear of approaching cyclists.
Scanning before signaling or maneuvering prevents sudden actions that could endanger cyclists traveling straight along the right side of the vehicle.
2
Signal intention continuously
Turn signal is activated at least 100 feet before reaching the intersection.
Traffic laws mandate continuous signaling for a minimum distance (typically 100 feet) to give trailing and oncoming drivers clear warning.
3
Position vehicle into the bike lane safely
Vehicle merges into the designated bicycle lane within the allowable 200-foot zone prior to the turn, yielding to any cyclists already present.
Merging into the bike lane before turning prevents dangerous 'right-hook' collisions where a vehicle turns across an active cyclist's path.
4
Decelerate and yield right-of-way at crosswalk
Vehicle slows down to turn speed and waits for pedestrians to clear the crosswalk of the target street.
Pedestrians in crosswalks maintain legal right-of-way over turning motor vehicles.
5
Execute and complete turning maneuver
Vehicle turns smoothly into the rightmost destination lane.
Standard traffic regulations mandate finishing right turns in the lane nearest to the right-hand curb unless markings direct otherwise.

Key Concept

Proper sequencing for right turns across bicycle lanes, including shoulder checks, advance signaling, lane positioning, and right-of-way yielding.
Question 2072Question

When parking a vehicle facing uphill on a street with a curb along the right side, in which direction should the front wheels be turned?

Show answer & explanation

Answer: Away from the curb (toward the center of the street)

Answer

The front wheels should be turned away from the curb (toward the center of the street).
When parking facing uphill along a curb, turning the front wheels away from the curb ensures that if the vehicle starts to roll backward, the back edge of the front tire will catch against the curb and stop the vehicle safely.

Step-by-Step Solution

1
Identify the slope direction and curb presence
The vehicle is facing uphill along a street with a curb on the right side.
Determining grade and curb presence establishes the correct wheel turning rule.
2
Select the appropriate wheel angle to catch the curb
Turn the front wheels away from the curb (to the left) so the back of the front tire rests against the curb edge if the vehicle rolls backward.
The curb acts as a natural wheel block preventing rolling into traffic lanes.

Key Concept

Uphill Parking with a Curb
Question 2073Question

Under standard driver licensing regulations, what is the statutory maximum speed limit in a school zone when children are outside near the roadway, unless a different limit is posted?

Show answer & explanation

Answer: 25 mph25\text{ mph}

Answer

25 mph25\text{ mph} is the standard statutory speed limit in a school zone while children are present.
Unless signs explicitly indicate a lower or higher limit, the standard statutory speed limit in a school zone when children are present is 25 mph25\text{ mph}.

Step-by-Step Solution

1
Identify the driving environment and hazard condition in the stem.
The scenario specifies driving through a designated school zone while children are present outside.
Special speed restrictions apply to protect child pedestrians near school grounds.
2
Apply the statutory speed regulation for school zones.
Unless signs indicate otherwise, the statutory limit drops to 25 mph25\text{ mph}.
Lower speeds significantly increase stopping distance margins and reduce collision severity.

Key Concept

School Zone Speed Regulations
Question 2074Question

A driver enters a signalized intersection on a steady circular green light planning to turn left, but must yield to oncoming traffic and stop inside the intersection. While waiting for a safe gap, the traffic signal light transitions to steady yellow and then steady red. Which action is the driver legally required to take to clear the intersection?

Show answer & explanation

Answer: Complete the left turn safely as soon as oncoming traffic stops or clears, even though the light has turned red.

Answer

Complete the left turn safely as soon as oncoming traffic stops or clears, even though the light has turned red.
When a driver enters an intersection legally on a steady green light to execute an unprotected left turn, they retain the right to complete the turn safely after oncoming traffic yields or stops, even if the traffic light turns red during the wait. This action prevents gridlock and clears the intersection for cross-traffic.

Step-by-Step Solution

1
Determine the legality of the initial entry into the intersection.
The vehicle legally entered the intersection under a circular green signal.
Drivers making an unprotected left turn may enter the intersection on green while waiting for oncoming traffic to clear.
2
Determine the required legal action when the light changes to red while trapped in the intersection.
The driver must clear the intersection by completing the turn when safe.
Traffic laws dictate that vehicles legally positioned inside an intersection when the signal changes must clear it immediately to prevent gridlock.

Key Concept

Intersection clearance procedure during an unprotected left turn signal change
Question 2075Question

A driver is parking a passenger vehicle facing uphill along the right-hand side of a two-way street that has a standard concrete curb. To prevent the vehicle from rolling into traffic if the parking brake fails, in which direction should the front wheels be turned?

Show answer & explanation

Answer: Away from the curb (turned to the left)

Answer

The front wheels should be turned away from the curb (to the left) so that the back of the front tire rolls into and rests against the curb edge.
When facing uphill along a curb, turning the front wheels away from the curb (left) uses the curb as a physical block. If the brakes fail, the back of the front tire will roll backward against the curb wall, preventing the vehicle from sliding down the street.

Step-by-Step Solution

1
Determine the direction of the incline and the presence of a curb.
The vehicle is parked facing uphill alongside a continuous concrete curb.
Hill parking safety depends on using gravity and the physical barrier of the curb as a backstop.
2
Select the proper wheel orientation for an uphill curb scenario.
Turn the front wheels away from the curb (to the left) and let the vehicle roll back slightly until the rear edge of the front tire touches the curb.
If the parking brake slips or fails, gravity will roll the car backward, causing the tire to bind against the curb instead of rolling down the street.

Key Concept

Hill Parking Wheel Position Rules with Curbs
Estimated Time:1m 0s
Question 2076Question

You are driving on a two-lane roadway and considering passing a slow-moving vehicle ahead. Which of the following statements accurately describes traffic laws regarding passing?

Show answer & explanation

Answer: Passing is strictly prohibited within 100 feet of any intersection or railroad crossing.

Answer

Passing is strictly prohibited within 100 feet of any intersection or railroad crossing.
Passing another vehicle is strictly illegal within 100 feet of an intersection, railroad crossing, bridge, or tunnel. This rule exists because cross-traffic, turning vehicles, and hidden hazards significantly increase collision risks in these zones.

Step-by-Step Solution

1
Identify traffic restrictions near intersections and crossings.
Recognize that driving views are obstructed and vehicles may turn or cross unpredictable paths near intersections.
Safety laws establish fixed distance buffers where passing is illegal.
2
Evaluate the 100-foot rule for passing.
State regulations mandate that no vehicle shall be driven on the left side of the roadway when approaching within 100 feet of an intersection, railroad crossing, bridge, or tunnel.
This minimizes high-risk head-on and broadside collisions at junction points.

Key Concept

Passing Restrictions Near Intersections and Crossings
Question 2077Question

While driving at night on a divided multi-lane roadway, you observe a solid yellow line painted along the pavement edge to your left and a solid white line painted along the pavement edge to your right. Which of the following statements correctly identifies the function of these pavement edge lines?

Show answer & explanation

Answer: They mark the outer boundaries of the travel lanes, showing that traffic is traveling in the correct direction with yellow defining the left border and white defining the right border.

Answer

Pavement edge lines define the boundaries of the roadway: a solid yellow line marks the left edge of a one-way roadway or divided highway, while a solid white line marks the right edge, guiding drivers safely within the legal travel pavement.
Solid pavement edge lines (delineators) define the legal boundaries of travel lanes. On divided highways and one-way roadways, a solid yellow line is placed along the far left edge to mark the median boundary, and a solid white line is placed along the far right edge to mark the right shoulder boundary. Seeing yellow on the left and white on the right confirms the vehicle is traveling in the correct direction.

Step-by-Step Solution

1
Identify the color and placement of the pavement edge lines described in the scenario.
The left pavement edge has a solid yellow line, and the right pavement edge has a solid white line.
Roadway design standards specify color coding for pavement edge markings (delineators) to assist spatial orientation.
2
Determine the legal meaning of left vs. right edge markings on divided or one-way roads.
Yellow lines separate opposing traffic or indicate the left edge of a one-way/divided roadway. White lines delineate the right shoulder/edge of travel lanes.
Understanding edge line rules helps drivers maintain proper lateral positioning and verify correct direction of travel, especially during low visibility.

Key Concept

Pavement Edge Line Color Standards and Boundary Identification
Question 2078Question

You are driving straight toward an intersection where the traffic signal is displaying a flashing yellow light. A car on the cross street is stopped at a flashing red light. Which of the following statements correctly describes right-of-way at this intersection?

Show answer & explanation

Answer: You may proceed through the intersection with caution without stopping, while the vehicle facing the flashing red light must yield to you.

Answer

You may proceed through the intersection with caution without stopping, while the vehicle facing the flashing red light must yield to cross traffic.
A flashing yellow signal requires drivers to slow down and proceed through the intersection with caution, but does not require a complete stop. In contrast, a flashing red signal functions exactly like a stop sign, requiring drivers to stop completely and yield to all cross traffic. Therefore, the driver facing the flashing yellow signal has the right-of-way.

Step-by-Step Solution

1
Identify the traffic signal control facing your direction of travel.
Your direction has a flashing yellow light, which indicates that you should slow down and proceed with caution without making a complete stop unless necessary.
Flashing yellow signals warn drivers of an intersection but do not require stopping if the path is clear.
2
Identify the signal control facing cross traffic.
Cross traffic faces a flashing red light, which functions legally identical to a stop sign.
Drivers facing a flashing red light must bring their vehicle to a complete stop and yield the right-of-way to all approaching traffic.
3
Determine right-of-way precedence between the two signals.
The driver with the flashing yellow light has priority and may proceed through the intersection while the driver at the flashing red light yields.
Traffic facing a warning signal (flashing yellow) has right-of-way over traffic facing a mandatory stop signal (flashing red).

Key Concept

Flashing Red vs. Flashing Yellow Signal Right-of-Way Rules
Estimated Time:45s
Question 2079Question

You arrive at a four-way intersection where a power outage has caused the traffic signals to flash red in all directions. You plan to make a left turn. At the same time, an oncoming vehicle directly across from you stops and intends to proceed straight through the intersection, while a pedestrian begins crossing the street into which you are turning. What is the correct yielding procedure you must follow in this situation?

Show answer & explanation

Answer: Yield the right-of-way to both the oncoming vehicle going straight and the pedestrian in the crosswalk.

Answer

Yield the right-of-way to both the oncoming vehicle going straight and the pedestrian in the crosswalk.
When a traffic signal is flashing red in all directions, drivers must treat the intersection as an all-way stop. Under standard right-of-way rules, a driver turning left must yield to oncoming vehicles traveling straight through the intersection as well as any pedestrians crossing the street.

Step-by-Step Solution

1
Identify the signal status requirement
Treat the flashing red signal in all directions as an all-way stop, requiring a complete stop before entering.
Traffic law mandates that an out-of-order or flashing red signal functions exactly like an all-way stop sign.
2
Apply vehicle right-of-way rules for turning drivers
Determine that the vehicle making a left turn must yield to oncoming traffic proceeding straight.
When two vehicles arrive simultaneously at an all-way stop from opposite directions, straight-through traffic has priority over turning traffic.
3
Apply pedestrian safety rules
Yield to the pedestrian crossing the street into which the left turn is being made.
Pedestrians lawfully inside crosswalks have right-of-way over turning vehicles at all intersections.

Key Concept

Right-of-Way at Flashing Red Traffic Signals and Left Turn Yielding Rules
Estimated Time:1m 0s
Question 2080Question

Four vehicles approach a four-way intersection where the traffic signals have completely failed due to a power outage, requiring all drivers to treat the intersection as a four-way stop. The arrival times and intended directions are as follows:

• Northbound Vehicle 1: Arrived first and came to a complete stop, intending to make a right turn.
• Southbound Vehicle 2: Arrived second, intending to turn left.
• Westbound Vehicle 3: Arrived second at the exact same time as Southbound Vehicle 2, intending to proceed straight.
• Eastbound Vehicle 4: Arrived last after the other three vehicles had already stopped.

In what order must these vehicles proceed through the intersection to adhere to official right-of-way rules?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct order of movement through the intersection is Northbound Vehicle 1 first, Westbound Vehicle 3 second, Southbound Vehicle 2 third, and Eastbound Vehicle 4 fourth.
At an intersection with failed traffic signals, all-way stop rules apply. The first vehicle to arrive and stop (Northbound Vehicle 1) proceeds first. When two vehicles arrive simultaneously (Southbound Vehicle 2 and Westbound Vehicle 3), the driver on the left must yield to the driver on the right, giving Westbound Vehicle 3 precedence over Southbound Vehicle 2. Vehicles that arrive after others are already stopped (Eastbound Vehicle 4) proceed last.

Step-by-Step Solution

1
Determine primary right-of-way based on arrival sequence
Northbound Vehicle 1 proceeds first.
When traffic signals fail, drivers must treat the intersection as an all-way stop. The first vehicle to reach and stop at the intersection line has the right-of-way.
2
Apply the yield-to-the-right rule for simultaneous arrival
Westbound Vehicle 3 proceeds second.
Southbound Vehicle 2 and Westbound Vehicle 3 arrived at the exact same time. At an all-way stop, when two vehicles arrive simultaneously, the driver on the left (Southbound Vehicle 2) must yield to the driver on their right (Westbound Vehicle 3).
3
Clear the next established vehicle in sequence
Southbound Vehicle 2 proceeds third.
After yielding to the vehicle on its right, Southbound Vehicle 2 is established next in sequence ahead of vehicles that arrived later.
4
Allow the last arriving vehicle to proceed
Eastbound Vehicle 4 proceeds fourth.
As the last vehicle to reach the intersection, Vehicle 4 must yield to all vehicles that were already stopped before its arrival.

Key Concept

Right-of-way precedence at inoperative signalized intersections treated as four-way stops
PreviousPage 104 / 127Next