Examkin

All practice questions

178 questions

All types2,524Multiple choice1,281Multiple select4True / False972Matching89Ordering178
Question 141Question →

You are driving on a two-lane road when an emergency vehicle with flashing lights and a siren approaches from behind. Place the following driver actions in the correct chronological order from first to last.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct sequence of actions is: 1) Check your mirrors and turn signal, 2) Steer your vehicle carefully to the far right edge of the roadway, 3) Bring your vehicle to a complete stop parallel to the right edge or curb, and 4) Remain stationary until the emergency vehicle has safely passed.
When an emergency vehicle with active lights and sirens approaches from behind, traffic law requires drivers to safely signal and check surroundings first, steer to the far right edge of the roadway, come to a complete stop clear of intersections, and remain stopped until the emergency vehicle has passed.

Step-by-Step Solution

1
Check surroundings and signal intention
Driver scans mirrors and activates the right turn signal
Signaling ensures other drivers are aware of your maneuver before you change vehicle position.
2
Move vehicle to the right side of the road
Vehicle safely transitions toward the far right edge or shoulder
Yielding the right-of-way requires clearing the main travel lane for emergency responders.
3
Come to a full stop
Vehicle stops completely parallel to the right shoulder or curb
Stopping prevents unexpected motion and provides maximum clearance for the emergency vehicle.
4
Wait for the emergency vehicle to pass
Driver stays stopped until the emergency vehicle clears the area
Remaining stopped ensures emergency responders can pass safely without sudden traffic conflicts.

Key Concept

Yielding Right-of-Way to Emergency Vehicles
Question 142Question →

Four road users arrive at an intersection controlled by four-way stop signs. Arrange the road users in the correct order in which they must be granted the right-of-way to proceed safely through the intersection.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct order of proceeding is: First, the pedestrian stepping into the marked crosswalk; Second, Driver A (first vehicle to stop); Third, Driver B (second vehicle to stop); Fourth, Driver C (third vehicle to stop).
Safety laws state that pedestrians in marked crosswalks must always be yielded to first. Once pedestrian movement is complete, traffic order at a four-way stop is governed by arrival order: the first vehicle to come to a complete stop moves first, followed by subsequent vehicles in the exact sequence they arrived and stopped.

Step-by-Step Solution

1
Identify non-vehicular road users with inherent right-of-way precedence.
The pedestrian in the marked crosswalk must be granted right-of-way first.
Traffic law mandates yielding to pedestrians in crosswalks prior to motor vehicle movements.
2
Apply the first-in, first-out rule for motor vehicles at a four-way stop.
Driver A proceeds next, followed sequentially by Driver B, then Driver C.
Right-of-way at multi-way stops is granted in order of arrival once all vehicles come to a complete stop.

Key Concept

Four-Way Stop Priority and Pedestrian Right-of-Way
Question 143Question →

Four vehicles approach a signalized intersection under different traffic and situational conditions. Based on standard right-of-way rules, in what order should these vehicles proceed through the intersection, from first (highest priority) to last (lowest priority)?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct order of right-of-way precedence from first to last is: (1) The emergency ambulance with active siren and flashing lights, (2) The sedan proceeding straight on a solid green light, (3) The pickup truck making an unprotected left turn on a solid green light, and (4) The compact car turning right on a solid red light after coming to a complete stop.
Standard traffic laws establish a clear hierarchy for intersection right-of-way. Emergency vehicles with active warning lights and sirens always receive top priority. Among non-emergency traffic, vehicles traveling straight on a green signal have priority over turning traffic. An unprotected left turn on green yields to oncoming straight traffic, but takes precedence over vehicles facing a red signal. Finally, turning right on red requires a complete stop and yielding to all traffic proceeding on a green light.

Step-by-Step Solution

1
Identify emergency vehicle priority
The ambulance with active sirens and lights proceeds first.
Traffic laws require all drivers to yield immediate right-of-way to emergency vehicles operating emergency signals.
2
Evaluate straight-through traffic on a green signal
The sedan traveling straight through on a solid green light proceeds second.
Straight-through traffic facing a green signal maintains right-of-way over turning vehicles.
3
Evaluate unprotected left turns on a green signal
The pickup truck making an unprotected left turn on green proceeds third.
Drivers making an unprotected left turn yield to oncoming straight traffic, but have precedence over drivers turning on a red light.
4
Evaluate right turns on a solid red light
The compact car turning right on red after stopping proceeds fourth (last).
Right turns on red are permitted only after coming to a complete stop and yielding to all vehicles moving on a green signal.

Key Concept

Intersection Right-of-Way Hierarchy
Question 144Question →

A driver is parked at the right-hand curb of a street and wants to enter active traffic. Arrange the following actions in the correct sequential order to ensure proper spatial awareness and blind spot safety before moving into the travel lane.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct sequence for safely pulling out from a curb into traffic is: 1. Check interior rearview and exterior side mirrors to observe approaching traffic from behind. 2. Turn on the left turn signal to alert other drivers of your intention to enter traffic. 3. Turn your head over your left shoulder to physically check the blind spot area not visible in the mirrors. 4. Steer smoothly into the travel lane when the roadway is clear.
The correct order requires first observing traffic in the mirrors, then signaling intent, followed immediately by a shoulder head check to cover blind spots right before executing the merge. This sequence ensures maximum spatial awareness and eliminates blind spot hazards.

Step-by-Step Solution

1
Scan surrounding traffic using interior and exterior mirrors.
Assesses general traffic flow behind the vehicle.
Mirrors provide an initial overview of approaching vehicles in the lane.
2
Activate the appropriate turn signal.
Communicates driver intent to surrounding road users.
Signaling early warns surrounding motorists and cyclists before any vehicle movement occurs.
3
Perform a physical head check over the left shoulder.
Verifies that no hidden vehicle or cyclist is occupying the blind spot.
Side mirrors cannot cover areas adjacent to the rear quarter of the vehicle.
4
Proceed into the travel lane.
Safely integrates the vehicle into traffic.
Entering the roadway should only happen after full verification that the path is clear.

Key Concept

Sequential spatial awareness checks and blind spot validation when merging into traffic from a stop.
Question 145Question →

A driver is planning to execute a U-turn on a multi-lane street. What is the correct chronological sequence of operational steps the driver must follow from start to finish?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct order of steps for completing a U-turn is: first, check mirrors and blind spots to verify safety and legal permission; second, activate the left turn signal at least 100 feet prior to turning; third, position the vehicle in the far-left or center turn lane; fourth, yield to oncoming traffic and pedestrians before completing the turn.
Safely executing a U-turn requires a specific sequential procedure: verifying safety and road signs first, signaling intention at least 100 feet prior to the turn, positioning the vehicle in the far-left lane, and yielding to all oncoming traffic and pedestrians before completing the maneuver.

Step-by-Step Solution

1
Check traffic and road signs
Confirms U-turns are permitted and surrounding traffic is aware.
Safety checks must precede any lane change or turning maneuver.
2
Signal intention
Gives clear notice to vehicles behind and ahead.
Drivers are legally required to signal continuously for at least 100 feet before turning.
3
Position vehicle in proper lane
Establishes correct lane position for a leftward turn.
U-turns must be initiated from the leftmost lane available for turning traffic.
4
Yield and complete turn
Safely executes the turn into the destination lane.
Oncoming traffic and pedestrians in crosswalks have the right-of-way over turning vehicles.

Key Concept

Chronological procedure and safety steps for executing a legal U-turn.
Question 146Question →

A driver traveling on a two-lane highway intends to pass a slower vehicle ahead. In what correct chronological order should the driver perform the following steps to complete a safe and legal passing maneuver?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The proper passing sequence begins with assessing traffic and road markings, followed by signaling left, checking the left mirror and shoulder blind spot, steering into the passing lane to overtake, and finally checking the inside rearview mirror for both headlights of the passed vehicle before signaling right and returning to the original lane.
Safe driving rules mandate a structured sequence: verify conditions and road markings first, signal intent to alert others, physically check mirrors and shoulder blind spots, complete the pass, and confirm clear space via the interior rearview mirror before returning to the original lane.

Step-by-Step Solution

1
Scan ahead and behind for safety and check road markings.
Confirms passing is permitted (broken yellow line) and oncoming traffic is sufficiently far away.
A driver must never attempt to pass without first establishing that it is legal and safe to do so.
2
Activate the left turn signal.
Intention to move into the left lane is communicated to nearby traffic.
Signals must be given in advance of any directional change.
3
Check the left mirror and look over the left shoulder.
Ensures no vehicle is approaching from behind in the left lane.
Mirrors alone do not cover blind spots, requiring a shoulder glance before changing lanes.
4
Move into the left lane and accelerate past the lead vehicle.
The driver overtakes the slower vehicle while maintaining control.
The physical maneuver is executed only after all observational checks pass.
5
Confirm space in rearview mirror, signal right, check right shoulder, and re-enter lane.
The driver completes the pass with safe clearance.
Seeing both headlights of the passed vehicle in the rearview mirror guarantees sufficient distance so as not to cut off the passed driver.

Key Concept

Standard Safe Passing Sequence on Two-Lane Highways
Question 147Question →

Four drivers arrive at an intersection controlled by four-way stop signs and come to complete stops in the following sequence:

1. Vehicle A (approaching from the East, intending to turn left) arrives and stops first.
2. Vehicle B (approaching from the West, intending to go straight) and Vehicle C (approaching from the South, intending to turn right) arrive and stop at the exact same time. Vehicle C is positioned to the right of Vehicle B.
3. Vehicle D (approaching from the North, intending to go straight) arrives and stops last.

Arrange the vehicles in the correct order in which they have the right-of-way to proceed through the intersection (from 1st to 4th).

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The vehicles must proceed in the following order: Vehicle A first, Vehicle C second, Vehicle B third, and Vehicle D fourth.
At an intersection controlled by four-way stop signs, right-of-way is primarily governed by arrival order ('first to stop, first to go'). Vehicle A arrived and stopped first, granting it initial right-of-way. When vehicles arrive simultaneously, the standard rule dictates yielding to the vehicle on your right. Because Vehicle C is to the right of Vehicle B, Vehicle C has priority over Vehicle B. Finally, Vehicle D arrived last and must wait for all previous vehicles to proceed.

Step-by-Step Solution

1
Determine the first vehicle to proceed based on arrival order.
Vehicle A arrived first before any other vehicle.
At a four-way stop, the first vehicle to reach the intersection and stop has the right-of-way to proceed first.
2
Resolve the right-of-way precedence between vehicles arriving simultaneously.
Vehicle C proceeds before Vehicle B.
When two vehicles stop at a four-way stop at the same time, the driver on the left must yield right-of-way to the driver on the right. Vehicle C is to the right of Vehicle B.
3
Place the vehicle that arrived last in the sequence.
Vehicle D proceeds fourth.
Vehicle D arrived after all other vehicles stopped, so it must wait for vehicles that arrived prior to clear the intersection.

Key Concept

Four-Way Stop Right-of-Way Rules (First Arrival and Yield-to-Right Priority)
Question 148Question →

You are driving on a highway and approach a stationary emergency vehicle displaying flashing red and blue lights on the right shoulder. Place the following driver actions in the correct sequential order from first to last to comply with Move Over laws.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct sequential order of driver actions when approaching a stationary emergency vehicle on the shoulder is: first check mirrors and blind spots, second activate your turn signal, third safely change into a non-adjacent lane, and fourth reduce speed if changing lanes is not possible.
When encountering a stationary emergency vehicle with active warning lights on the shoulder of a multi-lane road, Move Over laws require drivers to move out of the adjacent lane if safe. The proper sequence begins with observing surrounding traffic via mirrors and blind spots, signaling the intent to shift lanes, executing the lane change away from the emergency vehicle, and reducing speed as a fallback if changing lanes is unsafe.

Step-by-Step Solution

1
Scan surrounding traffic
Identified safe space in the adjacent travel lane
Drivers must first observe surrounding traffic using mirrors and blind spot checks to ensure a lane change can be performed safely.
2
Signal your intent to move
Warned trailing and adjacent drivers of the upcoming maneuver
Activating the signal informs other road users of your planned path before changing lanes.
3
Vacate the lane next to the emergency vehicle
Created a safe physical barrier space for emergency responders
Move Over regulations mandate shifting away from the immediate lane bordering a stopped emergency vehicle.
4
Adjust speed if lane change cannot be executed
Passed the emergency scene at a reduced speed and heightened awareness
When dense traffic blocks a lane change, slowing down significantly satisfies the legal requirement to protect roadside personnel.

Key Concept

Move Over Law Sequence
Question 149Question →

A driver traveling on a multi-lane roadway needs to move into the adjacent left lane. In what correct chronological order should the driver perform the following steps to execute the lane change safely?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The safe lane change procedure begins with checking the mirrors to assess traffic flow, followed by activating the directional signal to indicate intent. The driver must then look over the shoulder to check the blind spot, steer smoothly into the target lane, and finally deactivate the turn signal upon centering in the new lane.
A proper lane change protocol requires a systematic procedure starting with traffic awareness (checking rearview and side-view mirrors). Next, early intent communication is established by activating the turn signal. Immediately prior to steering, the driver performs a head turn over the shoulder to inspect the blind spot. Once clear, the driver smoothly maneuvers into the target lane and subsequently turns off the signal.

Step-by-Step Solution

1
Check rearview and side-view mirrors.
Determines general traffic flow and positioning of trailing vehicles.
Drivers must verify that traffic conditions permit a potential maneuver before signaling intent.
2
Turn on directional signal.
Alerts surrounding traffic of the driver's intention.
Communicating intent allows other road users adequate time to react and adjust space.
3
Look over the shoulder toward the target lane (blind spot check).
Verifies that the adjacent blind spot is free of vehicles, motorcycles, or bicycles.
Mirrors leave unmonitored zones beside the rear quarter of the vehicle that must be visually verified.
4
Steer smoothly into the target lane.
Completes the physical transition into the adjacent lane.
Execution should occur only after confirming the path is clear while maintaining proper flow of speed.
5
Cancel the turn signal.
Resets the vehicle's signaling system.
Leaving turn signals on after completing a maneuver misleads other drivers regarding future actions.

Key Concept

Standard Safe Lane Changing Sequence
Question 150Question →

When preparing to make a left turn at an upcoming intersection from a two-way street, what is the correct procedural sequence of actions a driver must follow? Arrange the steps in the correct order from first to last.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct sequence for making a left turn is: Check mirrors and blind spots -> Activate left turn signal -> Position vehicle near center line while slowing -> Yield to oncoming traffic/pedestrians and complete the turn.
Executing a safe left turn requires establishing situational awareness first via mirror and blind spot checks, giving continuous turn indication at least 100 feet prior to the turn, positioning the vehicle near the center line, and yielding to oncoming traffic and pedestrians before completing the maneuver.

Step-by-Step Solution

1
Check mirrors and perform a shoulder blind-spot check.
Identifies surrounding vehicles, cyclists, and pedestrians.
Initial visual checks ensure the roadway is safe before initiating any turn sequence.
2
Turn on the left directional signal at least 100 feet in advance.
Gives adequate advance notice of intent to surrounding drivers.
Traffic laws mandate continuous signaling prior to turning to prevent rear-end and side collisions.
3
Move smoothly into the lane closest to the center line while decelerating.
Sets up proper vehicle trajectory for entering the cross street.
Proper lane positioning keeps traffic moving efficiently and prevents wide, unsafe turns.
4
Yield to oncoming straight-through vehicles and pedestrians, then steer into the left-most receiving lane.
Completes the left turn safely without disrupting right-of-way traffic.
Left-turning vehicles must yield to oncoming traffic unless a protected green arrow is displayed.

Key Concept

Standard Left-Turn Execution Sequence
Question 151Question →

A driver traveling on a roadway with a marked right-side bicycle lane intends to make a right turn at an upcoming intersection. What is the correct sequence of steps the driver must follow from first to last to complete this maneuver safely and legally?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct order of procedural steps is: 1) Check mirrors and scan the right shoulder blind spot for cyclists; 2) Activate the right turn signal at least 100 feet before the intersection; 3) Merge into the bicycle lane or close to the right curb when clear; 4) Yield to crosswalk pedestrians and execute the turn into the rightmost lane.
Executing a proper right turn across a bicycle lane requires checking mirrors and shoulder blind spots first, signaling at least 100 feet in advance, merging into the bicycle lane/far-right curb position when safe to block right-side pass attempts, and yielding to crosswalk traffic before turning into the rightmost lane.

Step-by-Step Solution

1
Scan mirrors and perform a right-shoulder blind spot check
Identifies any oncoming or trailing bicycles traveling in the dedicated bike lane
Prevents turning directly into the path of an unseen cyclist
2
Engage the right turn signal at least 100 feet prior to the turn
Gives adequate warning to vehicles and vulnerable road users behind
Fulfills legal advance signaling requirements before changing vehicle direction or lane position
3
Transition into the bike lane or near the right curb line
Establishes proper right-turn positioning and closes the gap on the right
Prevents cyclists from trying to squeeze past on the right while turning
4
Yield right-of-way to crosswalk traffic and turn into the rightmost receiving lane
Safely completes the turn without interfering with pedestrians or lane discipline
Adheres to right-of-way regulations and standard multi-lane turning protocol

Key Concept

Procedural ordering for right turns across bicycle lanes
Question 152Question →

Three vehicles arrive at an uncontrolled four-way intersection at the exact same time. Vehicle 1 is approaching from the West, Vehicle 2 is approaching from the South, and Vehicle 3 is approaching from the East. All three drivers intend to proceed straight. In what order must these vehicles proceed through the intersection according to right-of-way rules?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

Vehicle 3 proceeds first, followed by Vehicle 2, and Vehicle 1 proceeds last.
At an uncontrolled intersection, drivers must yield to any vehicle approaching from their immediate right. Looking at the three vehicles: Vehicle 1 (West) has Vehicle 2 (South) to its right; Vehicle 2 (South) has Vehicle 3 (East) to its right; Vehicle 3 (East) has no vehicle to its right because the North approach is clear. Therefore, Vehicle 3 proceeds first. Once Vehicle 3 clears, Vehicle 2 no longer has a vehicle on its right and proceeds second. Finally, Vehicle 1 proceeds last after Vehicle 2 clears.

Step-by-Step Solution

1
Identify the right-of-way rule for uncontrolled intersections.
When multiple vehicles arrive simultaneously at an uncontrolled intersection, each driver must yield to the vehicle on their immediate right.
Standard traffic law establishes priority based on yielding to the right when no traffic control devices are present.
2
Analyze the right-to-left positional relationships of all three vehicles.
Vehicle 1 (West) has Vehicle 2 (South) to its right. Vehicle 2 (South) has Vehicle 3 (East) to its right. Vehicle 3 (East) has an empty North approach to its right.
Checking the immediate right approach for each vehicle determines who has an unobstructed right-of-way.
3
Establish the sequence of movement based on who must yield.
Vehicle 3 moves first because North is clear. Next, Vehicle 2 moves because East is now clear. Finally, Vehicle 1 moves because South is now clear.
As each vehicle clears the intersection, the vehicle to its left is freed of its requirement to yield.

Key Concept

Yielding to the vehicle on the right at uncontrolled intersections
Question 153Question →

While driving on a wet highway, water builds up under your tires and your vehicle begins to hydroplane across standing water. What is the correct sequential order of actions you should take to safely regain vehicle control?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct order of actions to recover from hydroplaning is: first, smoothly ease off the accelerator; second, hold the steering wheel firmly straight ahead; third, allow the tires to regain traction with the road; and finally, gently apply the brakes once control is completely restored.
When a vehicle hydroplanes, the tires lose contact with the road. The driver must first ease off the gas pedal to reduce speed without locking the wheels, keep the wheel straight to maintain stability, wait for the tires to regain traction on the pavement, and only then apply gentle braking if necessary.

Step-by-Step Solution

1
Release the accelerator pedal smoothly.
Vehicle speed gradually declines without transferring weight abruptly.
Sudden deceleration or braking while hydroplaning can induce a violent skid.
2
Keep the steering wheel stable and pointed straight.
Prevents the vehicle from pitching sideways when tire grip returns.
Turned front wheels will cause sudden lateral jerk upon gripping pavement.
3
Wait for tire tread to clear water and reconnect with asphalt.
Full mechanical traction between rubber and road is re-established.
Control inputs are ineffective until tires physically touch the road.
4
Gently apply brakes if further speed reduction is needed.
The vehicle safely slows down under full operator control.
Braking is safe only when friction between tires and pavement is active.

Key Concept

Hydroplaning Recovery Procedure
Estimated Time:45s
Question 154Question →

Place the following actions in the correct sequential order for executing a safe right turn at an intersection, starting with the first action a driver must take.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The proper order of actions for making a right turn is: check mirrors and blind spot, activate the turn signal at least 100 feet in advance, move into the rightmost lane while reducing speed, and yield to pedestrians before turning into the rightmost lane.
The correct procedural order requires checking mirrors and blind spots first to ensure safety, signaling the intention at least 100 feet before the turning point, moving into the rightmost lane while slowing down, and finally yielding to pedestrians before completing the turn into the rightmost lane.

Step-by-Step Solution

1
Check surroundings
The driver confirms that the road edge and adjacent traffic areas are clear of vulnerable road users.
Scanning traffic and blind spots prior to signaling ensures safe lane occupancy.
2
Signal intention
The turn signal alerts surrounding drivers and pedestrians at least 100 feet prior to the turn.
Early communication reduces collision risks from following or oncoming vehicles.
3
Position vehicle and adjust speed
The vehicle safely enters the rightmost lane and decelerates.
Proper lane entry prevents swinging wide or cutting off traffic in adjacent lanes.
4
Yield and complete turn
The driver waits for pedestrians to cross and turns into the nearest lane of the cross street.
Pedestrians have right-of-way in crosswalks, and finishing in the closest lane avoids lane-change conflicts.

Key Concept

Sequential turning and signaling procedures
Estimated Time:45s
Question 155Question →

While driving in icy weather, your vehicle unexpectedly enters a rear-wheel skid on a patch of black ice. What is the correct sequence of actions to safely regain control of your vehicle?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

To safely recover from a skid on black ice, first ease off the accelerator without braking, then steer in the direction you want the car to travel, counter-steer gently as the car realigns to prevent overcorrecting, and finally straighten the wheel to continue driving safely once traction is restored.
Smooth, deliberate control inputs are required during a skid on ice. Taking your foot off the accelerator allows tires to regain rolling grip without locking up. Steering toward your target path aligns the front tires, and gentle counter-steering prevents overcorrection before straightening out to full control.

Step-by-Step Solution

1
Release the accelerator pedal immediately and avoid touching the brakes.
Tires stop spinning freely and start regaining grip on the road surface.
Braking during a skid locks the tires, making steering impossible and worsening the skid.
2
Steer smoothly toward your target path.
The vehicle begins turning back onto the intended path.
Aligning front tire direction with vehicle momentum re-establishes directional control.
3
Counter-steer gently as the vehicle straightens.
Neutralizes secondary momentum that could spin the vehicle the opposite way.
Abrupt steering corrections cause secondary fishtail skids.
4
Center the steering wheel when traction returns.
Vehicle travels straight and under full driver control.
Ensures complete control before resuming gradual acceleration.

Key Concept

Skid recovery steps in low-traction conditions
Question 156Question →

Four vehicles approach a four-way intersection controlled by stop signs in all directions. They arrive and come to a complete stop in sequential order: Vehicle 1 arrives first intending to proceed straight, Vehicle 2 arrives second intending to turn right, Vehicle 3 arrives third intending to turn left, and Vehicle 4 arrives last intending to proceed straight. Arrange the order in which these vehicles must proceed through the intersection legally, from first to last.

Drag items to arrange them in the correct order

Show answer & explanation

Answer

Vehicle 1 proceeds first, followed by Vehicle 2, then Vehicle 3, and finally Vehicle 4.
At an intersection controlled by four-way stop signs, right-of-way is strictly determined by arrival order. The driver who comes to a complete stop first is the first to proceed. Because all four vehicles arrived at distinct times, they proceed in the exact sequence of their arrival: Vehicle 1, followed by Vehicle 2, then Vehicle 3, and lastly Vehicle 4.

Step-by-Step Solution

1
Identify the controlling rule for a four-way stop intersection when vehicles arrive sequentially.
The fundamental rule at multi-way stop signs is first-in, first-out (FIFO). Right-of-way is granted based on arrival order regardless of turning intentions.
Directional priority rules (such as straight traffic over left-turning traffic) apply only when vehicles arrive simultaneously.
2
Rank the movement order according to the established arrival sequence.
Since arrival order is Vehicle 1 → Vehicle 2 → Vehicle 3 → Vehicle 4, the departure sequence matches this exact order.
Each vehicle must yield to any vehicle that arrived at the intersection before it.

Key Concept

First-come, first-served precedence at multi-way stop intersections
Estimated Time:1m 0s
Question 157Question →

What is the correct sequential order of actions a driver must take to safely execute a three-point turn (turnabout) on a narrow two-lane street?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The proper sequence begins by signaling right and pulling over to the right curb, followed by signaling left and turning sharply across the street to the far curb, then shifting into reverse to back up while steering right, and concluding by shifting into drive to proceed forward.
Executing a three-point turn requires establishing a safe starting position at the right curb, signaling and steering across traffic to the far curb, backing up with reverse steering to orient the vehicle, and finally driving forward once clear.

Step-by-Step Solution

1
Signal right and bring the vehicle to a complete stop at the right edge of the road.
The vehicle is positioned safely along the right curb.
Starting from the far right edge maximizes the vehicle's turning radius across the narrow road.
2
Signal left, check mirrors and blind spots, and steer sharply left to the far side of the road.
The front bumper comes close to the opposite curb, angled across the roadway.
Yielding to traffic and signaling before turning ensures safe entry across the lane.
3
Shift into reverse, re-check traffic in both directions, and back up while turning the steering wheel right.
The vehicle rotates around so its front end faces down the street in the intended direction.
Reversing to the right clears space for the vehicle to proceed forward without hitting the opposite curb.
4
Shift into drive and accelerate forward into the travel lane.
The turnabout is complete and the vehicle resumes travel in the opposite direction.
Checking oncoming traffic one final time ensures the lane is completely safe to enter.

Key Concept

Three-Point Turn (Turnabout) Procedural Sequence
Question 158Question →

Arrange the following vehicles in the correct order of right-of-way priority when approaching an intersection, from FIRST to proceed (highest priority) to LAST to proceed (lowest priority).

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct order from highest to lowest right-of-way priority is: 1) The active emergency vehicle, 2) The vehicle already clearing the intersection, 3) The vehicle arriving from the right at an uncontrolled intersection, and 4) The vehicle entering from a private driveway.
Right-of-way rules establish a strict priority hierarchy: Active emergency vehicles take absolute precedence first. Next, vehicles already established within the intersection must be allowed to complete their turn or clearance. Third, among vehicles on public roads at uncontrolled intersections, the vehicle on the right has right-of-way. Finally, vehicles entering from private property have the lowest priority and must yield to all public roadway traffic.

Step-by-Step Solution

1
Identify top priority vehicles under statutory law
Emergency vehicles with active lights and sirens always take absolute precedence over standard traffic.
Public safety laws mandate immediate yield of right-of-way to active emergency responders.
2
Evaluate intersection occupancy
Traffic already established in the intersection must be permitted to clear before new traffic enters.
Entering an intersection before established traffic clears creates gridlock and collision hazards.
3
Apply uncontrolled public intersection rules
The vehicle arriving from the right on a public road has right-of-way precedence.
Standard right-hand rule applies among vehicles on public roadways when signs or signals are absent.
4
Determine private vs. public entry priority
The vehicle exiting a private driveway yields to all traffic already on the public street.
Public road traffic holds priority over traffic merging from private property or unpaved driveways.

Key Concept

Right-of-Way Priority Hierarchy at Intersections
Estimated Time:1m 15s
Question 159Question →

You are driving on a multi-lane highway and observe temporary work zone signage indicating that your lane ends ahead. In what order should you execute the following actions to safely transition into the open lane?

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The proper sequence for navigating a work zone lane closure is: 1) Read the advance warning signs, 2) Check mirrors and blind spots for a gap, 3) Activate your turn signal, 4) Merge smoothly into the open lane early, and 5) Adjust speed and following distance for work zone safety.
Safely navigating a construction lane reduction requires early hazard detection through advance warning signs, checking traffic to locate a safe gap, signaling intent, merging into the open lane well before the cone taper, and maintaining reduced speed with extended following distance.

Step-by-Step Solution

1
Scan early warning signs.
Identify that a lane closure is ahead and determine which lane remains open.
Advance warning signs give drivers sufficient distance and time to plan their actions.
2
Assess surrounding traffic.
Locate an acceptable space gap in the adjacent open lane.
Checking mirrors and blind spots verifies that a lane change can be performed safely.
3
Signal your intent.
Alert surrounding motorists of the incoming lane movement.
Communication gives drivers behind and beside you time to adjust speed or create space.
4
Perform the lane change.
Move smoothly into the open lane prior to the start of the channelizing cones.
Early merging keeps traffic flowing smoothly and avoids sudden braking at the taper.
5
Adjust vehicle control parameters.
Drive at or below the posted work zone speed limit and double your safe following distance.
Work zones present restricted space and unpredictable hazards that require lower speeds and larger safety buffers.

Key Concept

Work zone lane closure merge procedure and hazard management
Estimated Time:1m 30s
Question 160Question →

Four vehicles are approaching a four-way stop intersection under different conditions. Arrange the vehicles in the correct order of right-of-way priority, from FIRST to proceed (1) to LAST to proceed (4).

Drag items to arrange them in the correct order

Show answer & explanation

Answer

The correct order from first to proceed to last to proceed is: 1) Emergency vehicle with active siren, 2) Sedan that arrived first, 3) Pickup truck proceeding straight, 4) SUV turning left.
Right-of-way at an intersection follows a strict hierarchy: active emergency vehicles proceed first, followed by non-emergency vehicles in order of arrival, and finally resolving simultaneous arrival ties by giving straight-through traffic priority over left-turning traffic.

Step-by-Step Solution

1
Identify top priority vehicles in emergency status
The emergency vehicle with active sirens and lights is placed first.
Traffic laws mandate that all drivers immediately yield right-of-way to active emergency vehicles regardless of standard arrival sequence.
2
Determine right-of-way by arrival sequence for standard vehicles
The sedan that arrived first and completed its stop is placed second.
At four-way stop intersections, the first vehicle to come to a complete stop has right-of-way over vehicles arriving later.
3
Resolve priority between simultaneous arrival vehicles
The straight-bound pickup truck proceeds third, followed by the left-turning SUV in fourth place.
When opposing vehicles stop simultaneously, straight-through traffic takes priority over left-turning traffic, which must yield before crossing oncoming travel lanes.

Key Concept

Intersection Right-of-Way Hierarchy and Turning Rules
Estimated Time:1m 30s
PreviousPage 8 / 9Next
All practice questions — DMV Permit Practice Test | Examkin