Before starting a journey, a driver must confirm that the vehicle's braking system is working safely and effectively. In which order should these checks be performed?
- 1Press the footbrake pedal firmly while stationary to ensure it feels resistant and not spongy or slack.
- 2Check all surroundings and move off slowly in a safe, clear area.
- 3Apply the footbrake gently while the vehicle is travelling at low speed.
- 4Confirm that the vehicle stops smoothly and does not pull to one side.
Answer
1. Press the footbrake pedal firmly while stationary to ensure it feels resistant and not spongy or slack. 2. Check all surroundings and move off slowly in a safe, clear area. 3. Apply the footbrake gently while the vehicle is travelling at low speed. 4. Confirm that the vehicle stops smoothly and does not pull to one side.
According to the Official DVSA standards and Highway Code, brake functionality must be tested systematically. The driver starts with a static check to ensure the pedal is firm (not spongy or slack). Once static pressure is confirmed, the driver moves off slowly in a safe area, applies the footbrake gently, and confirms that the vehicle stops effectively without pulling to one side.
Step-by-Step Solution
Key Concept
Standard pre-drive brake system verification procedure and fault identification
Estimated Time:1m 0s