Examkin

Specialized Testers

3 soru

Tüm türler3Çoktan seçmeli2Boşluk doldurma1
Soru 1Soru →

An electronics technician needs to verify the insulation integrity of high-voltage motor windings to ensure there is no current leakage to ground. Which specialized test instrument is designed specifically to measure these extremely high resistance values?

Cevabı ve açıklamayı göster

Cevap: Megohmmeter

Cevap

Megohmmeter
A megohmmeter (commonly referred to as a megger) applies a high DC test voltage across an insulator or motor winding to measure resistance in the megohm range, making it the proper instrument for evaluating insulation integrity.

Adım Adım Çözüm

1
Identify the diagnostic requirement in the scenario.
The task requires measuring extremely high resistance values and checking insulation integrity against breakdown under high voltage.
Standard multimeters operate with low test voltages (3 to 9 V3\text{ to }9\text{ V}) and cannot expose insulation breakdown that occurs under high operational potentials.
2
Select the specialized test instrument designed for high-voltage resistance and insulation testing.
A megohmmeter (megger) applies a high DC test voltage (250 to 1000 V250\text{ to }1000\text{ V}) to measure resistance in the megohm or gigohm range.
The megohmmeter is specifically built for insulation testing and detecting minute leakage currents.

Anahtar Kavram

Specialized Testers - Megohmmeter (Megger) Insulation Testing
Tahmini Süre:45s
Soru 2Soru →

A technician is evaluating an electronic communication circuit to determine the exact repetition rate of an incoming periodic signal. Which specialized testing device correctly completes the statement below?

Aşağıdaki boşlukları doldurun

An instrument designed specifically to measure and digitally display the precise number of periodic cycles per second of an incoming alternating current or radio-frequency signal is known as a .
Cevabı ve açıklamayı göster

Cevap

frequency counter
A frequency counter operates by routing an input signal through a Schmitt trigger and gate circuit that opens for a calibrated time window (such as one second), counting the exact number of pulses to display the frequency directly in Hertz.

Adım Adım Çözüm

1
Identify the electrical property being tested in the scenario.
The quantity being measured is cycles per second, which defines frequency measured in Hertz (HzHz).
Matching the electrical parameter to its dedicated measurement device is necessary to select the correct specialized tester.
2
Determine the dedicated bench instrument designed for high-resolution frequency measurement.
A frequency counter accurately tallies waveform transitions against an internal calibrated time base.
While general multimeters measure voltage and resistance, and oscilloscopes visualize wave shape, a frequency counter specifically provides high-precision digital frequency readings.

Anahtar Kavram

Operating principles and diagnostic applications of specialized frequency counters.
Tahmini Süre:45s
Soru 3Soru →

During the bench repair of an analog power supply, an electronics technician needs to verify whether a suspected bipolar junction transistor has suffered internal junction breakdown and determine its direct current gain (hFEh_{FE} or β\beta). Which specialized test instrument is specifically engineered to perform these component checks?

Cevabı ve açıklamayı göster

Cevap: Transistor tester

Cevap

The transistor tester is specifically designed to test the internal junctions, identify leads, and measure the DC current gain (hFEh_{FE}) of bipolar junction transistors.
A transistor tester is engineered specifically to test solid-state bipolar transistors. It applies precise DC biasing to the device under test, measures the resulting collector and base currents, computes the DC current gain (hFE=IC/IBh_{FE} = I_C / I_B), and verifies whether the internal P-N junctions are open, shorted, or normal.

Adım Adım Çözüm

1
Analyze the diagnostic task and parameters required
The technician needs to determine transistor junction health (checking for open or shorted junctions) and measure the direct current amplification factor (hFE=IC/IBh_{FE} = I_C / I_B).
Selecting the correct specialized tool requires matching the tool's built-in functions with the specific component parameters being tested.
2
Evaluate the capabilities of specialized electronics testing instruments
A transistor tester supplies calibrated base currents, monitors collector responses, calculates current gain (hFEh_{FE}), and detects open or shorted internal diodes.
Standard multimeters, voltmeters, and wattmeters do not provide the active parametric test environment needed for complete semiconductor analysis.

Anahtar Kavram

Specialized semiconductor testers supply dedicated DC test currents to evaluate internal junction integrity and measure active parameters such as current gain (hFEh_{FE}).
Tahmini Süre:1m 0s